MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence. PERFORMANCE ACCESSORIES Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell.

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence. PERFORMANCE ACCESSORIES Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell.

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell. PERFORMANCE UPGRADES At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades. CONTACT | MICHELL ENGINEERING We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

MY PRODUCTS

We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

T2 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING The latest T2 Tonearm design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each T2 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way

DESIGN PHILOSOPHY

The task of a turntable is simple. The design of a turntable is not! At audio frequencies, the arm should be kept locked above the groove, without any extraneous motion relative to the cartridge. And the groove should be dragged at a constant angular speed underneath the

stylus.

ARTISAN CARTRIDGES

All of the Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge. 30μ pure copper wire is used to precision wind the cartridge coils onto an ultra-lightweight armature, which is mounted onto a specially designed damper.

WHERE TO BUY

Audio Gold. 308/310 Park Road. London N8 8LA. 0208 341 9007. www.audiogold.co.uk. Audio Venue. 27 Bond Street. Ealing. London W5 5AAS. 0208 567 8703. www.audiovenue.uk WWW.MICHELL-ENGINEERING.CO.UK www.michell-engineering.co.uk

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE UPGRADES Michell Performance Upgrades. At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades. However, we have always believed that although we may bring

out a new

TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover.

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE UPGRADES Michell Performance Upgrades. At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades. However, we have always believed that although we may bring

out a new

TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell.

MY PRODUCTS

We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

WHERE TO BUY

Audio Gold. 308/310 Park Road. London N8 8LA. 0208 341 9007. www.audiogold.co.uk. Audio Venue. 27 Bond Street. Ealing. London W5 5AAS. 0208 567 8703. www.audiovenue.uk T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system. T2 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING The latest T2 Tonearm design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each T2 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

ARTISAN CARTRIDGES

All of the Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge. 30μ pure copper wire is used to precision wind the cartridge coils onto an ultra-lightweight armature, which is mounted onto a specially designed damper.

DESIGN PHILOSOPHY

The task of a turntable is simple. The design of a turntable is not! At audio frequencies, the arm should be kept locked above the groove, without any extraneous motion relative to the cartridge. And the groove should be dragged at a constant angular speed underneath the

stylus.

WWW.MICHELL-ENGINEERING.CO.UK www.michell-engineering.co.uk

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE UPGRADES Michell Performance Upgrades. At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades. However, we have always believed that although we may bring

out a new

TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover.

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE UPGRADES Michell Performance Upgrades. At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades. However, we have always believed that although we may bring

out a new

TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell.

MY PRODUCTS

We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

WHERE TO BUY

Audio Gold. 308/310 Park Road. London N8 8LA. 0208 341 9007. www.audiogold.co.uk. Audio Venue. 27 Bond Street. Ealing. London W5 5AAS. 0208 567 8703. www.audiovenue.uk T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system. T2 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING The latest T2 Tonearm design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each T2 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

ARTISAN CARTRIDGES

All of the Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge. 30μ pure copper wire is used to precision wind the cartridge coils onto an ultra-lightweight armature, which is mounted onto a specially designed damper.

DESIGN PHILOSOPHY

The task of a turntable is simple. The design of a turntable is not! At audio frequencies, the arm should be kept locked above the groove, without any extraneous motion relative to the cartridge. And the groove should be dragged at a constant angular speed underneath the

stylus.

WWW.MICHELL-ENGINEERING.CO.UK www.michell-engineering.co.uk

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system. HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell. CONTACT | MICHELL ENGINEERING We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

PERFORMANCE UPGRADES At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades.

ARTISAN CARTRIDGES

All of the Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge. 30μ pure copper wire is used to precision wind the cartridge coils onto an ultra-lightweight armature, which is mounted onto a specially designed damper.

DESIGN PHILOSOPHY

The task of a turntable is simple. The design of a turntable is not! At audio frequencies, the arm should be kept locked above the groove, without any extraneous motion relative to the cartridge. And the groove should be dragged at a constant angular speed underneath the

stylus.

T2 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING The latest T2 Tonearm design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each T2 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way

WHERE TO BUY

Audio Gold. 308/310 Park Road. London N8 8LA. 0208 341 9007. www.audiogold.co.uk. Audio Venue. 27 Bond Street. Ealing. London W5 5AAS. 0208 567 8703. www.audiovenue.uk

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL ENGINEERING

50 years of British engineering. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. REFERENCE TURNTABLES At Michell Engineering, we have been building quality audio turntables in Borehamwood, England for nearly 50 years, which makes us one of the oldest manufacturers in the industry. Michell turntables are precision instruments that are designed to reproduce sound as close as possible to the master tape. All of our turntables are built to last for decades and are fully upgradeable.

MICHELL GYRODEC

The classic Michell turntable, continuously refined during many years of development to the current level of performance. The Michell GyroDec is a three-point spring-suspended turntable of medium mass, which is compatible with most quality tone arms in existence.

PRECISION TONEARMS

Michell-engineered value for money tonearms that goes back to the Fluid and Focus unipivot models of the seventies. Learned from many years of experience, we now offer a range of Rega-styled tonearm accessories that we feel offer a significant audio upgrade to the standard models whilst also allowing the user considerably more setup

refinement.

MICHELL ORBE

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

MICHELL TECHNODEC

Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable. PERFORMANCE ACCESSORIES Michell Performance Accessories. Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust. Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal TECNOARM 2 | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system.

MICHELL GYRO SE

Based entirely on the GyroDec, but without the costly acrylic plinth and dustcover, the Gyro SE brings the same qualities in a more affordable and compact package. A Michell Gyro SE can always be converted into a GyroDec by purchasing a plinth and dustcover. T3 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING Our flagship turntable, the Orbe continues to receive acclaim the world over. Taking the established concept of the GyroDec to greater heights, the Orbe adds an extra level of isolation, better structural damping, and an improved motor drive system. HISTORY | MICHELL ENGINEER Right from our very humble beginnings, we have set out to design and build products that offer true innovation to the audio world whilst still retaining the personal touch that was instilled into the company by our founder – the late John Michell. CONTACT | MICHELL ENGINEERING We are only a small team and each email is important to us. We cannot always answer your messages straight away, however we will endeavour to respond to your message within 7 working days. Thank you for your

patience.

MICHELL ORBE SE

By eliminating much of the expensive acrylic, the Michell Orbe SE offers most of the Orbe’s qualities in a cheaper, smaller, and to some people aesthetically more pleasing package. An Orbe SE can always be upgraded to a full Orbe by purchasing the double plinth and

dustcover.

PERFORMANCE UPGRADES At Michell Engineering, we are constantly looking at improvements to our products that can add real benefit in audio quality for our customers. This has meant that over the years, many of our products have been through revisions and upgrades.

ARTISAN CARTRIDGES

All of the Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge. 30μ pure copper wire is used to precision wind the cartridge coils onto an ultra-lightweight armature, which is mounted onto a specially designed damper.

DESIGN PHILOSOPHY

The task of a turntable is simple. The design of a turntable is not! At audio frequencies, the arm should be kept locked above the groove, without any extraneous motion relative to the cartridge. And the groove should be dragged at a constant angular speed underneath the

stylus.

T2 TONEARM | REFERENCE TONEARM | MICHELL ENGINEERING The latest T2 Tonearm design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each T2 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way

WHERE TO BUY

Audio Gold. 308/310 Park Road. London N8 8LA. 0208 341 9007. www.audiogold.co.uk. Audio Venue. 27 Bond Street. Ealing. London W5 5AAS. 0208 567 8703. www.audiovenue.uk

* Home

* Reference Turntables * Precision Tonearms * Artisan Cartridges * Performance Upgrades * Performance Accessories

* Design Philosophy

* Michell History

* Dealers and Distributors

* Contact Us

GET IN TOUCH...

020 8953 0771

FACEBOOK

INSTAGRAM

WE ARE OPEN!

We would like to say a big ‘Thank you’ to all of our customers and suppliers for their patience and support at this time. As most audio stores are closed we are now accepting enquiries

directly.

If you are interested in one of our products or have an outstanding order for one of our products with an audio store, call us on (+44)

0208 953 0771

SERVICE DEPARTMENT

Our service department will unfortunately remain closed to new items until further notice, we apologise for any inconvenience this may

cause.

If you have a urgent matter please call (+44) 0208 953 0771. If you have an item already with us, we will contact you as soon as possible to arrange the return of your item or a contact-free method

of collection.

Michell Engineering create reference class vinyl playback systems for people who live for music Owning a Michell Engineering turntable allows you to step into a brighter, more open and purer listening experience and because our products are so well engineered, this experience will last you a

liftetime.

We continually advance the playback of vinyl, whilst maintaining our core values of quality, performance, simplicity and affordability. Visit your local Michell dealer and listen to the last turntable

you'll ever buy.

Reference Turntables Browse our unique range of precision engineered reference turntables.

TURNTABLES

Precision Tonearms

Enhance your playback performance with a Michell Tonearm. TONEARMS

Artisan Cartridges

Discover every nuance and detail with our reference cartridges.

CARTRIDGES

Performance Upgrades Elevate your system with our upgrades packs and system accessories.

UPGRADES

Watch the history of Michell Engineering

*

"IF LOW COLOURATION AND EVEN-HANDED TONALITY IS YOUR PRIORITY, THE ARRIVAL OF THE MICHELL TECNOARM MEANS YOU NO LONGER HAVE TO SAVE FOR A

SME."

TNT Audio - Michell TecnoArm Review

Button

*

"IT’S A POWERFUL PACKAGE OF FINE SOUND, PEERLESS BUILD AND FINISH AND GENUINE UPGRADEABILITY, BUT AT THE PRICE, IT’S NIGH-ON

UNBEATABLE."

HiFi World - Michell Gyro SE Review

Button

*

"IT WAS THE NEAREST THING TO REAL PERFORMED MUSIC, OR THE MASTERTAPE, I HAVE HEARD IN A LONG WHILE." HiFi News - Michell Orbe Review

Button

*

"THE CLAMPING SYSTEM AND PLATTER CONSTRUCTION AND DRIVE METHOD SEEM TO MANAGE THE BEST COMPROMISE BETWEEN CLARITY OF SOUND AND STRONG RHYTHMIC PERFORMANCE." HiFi News - Michell Orbe Review

Button

*

“IT HAS A BREADTH AND APPEAL THAT NONE OF THE ALTERNATIVES COULD QUITE MATCH, WHICH IS IMPRESSIVE, TO SAY THE LEAST.” HiFi Choice - Michell Orbe Review

MashIt

*

“AND THE SOUND? THIS WAS UNCANNY.” TNT Audio - Michell Orbe Review

Button

*

"A FEELING THAT YOU’RE DRAGGING THE LAST FRACTION OF FIDELITY FROM A DISC TO GET YOU RIGHT UP TO THE MASTERTAPE." TNT Audio - Michell Orbe Review

Button

*

*

� 2020 Michell Engineering - All Rights Reserved. Website by CoshNiven

Share by: