HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

NEPTUNE - XENOCRON

NepTune RTP Demon Real-Time Programming Tuning Software for Honda/Acura vehicles. Now supporting the Demon hardware ONLY, from Moates.net, this software is one of the most extensive, straightforward, and stable tuning solution for Honda/Acura. THIS IS

FOR USE WITH A

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

NEPTUNE - XENOCRON

NepTune RTP Demon Real-Time Programming Tuning Software for Honda/Acura vehicles. Now supporting the Demon hardware ONLY, from Moates.net, this software is one of the most extensive, straightforward, and stable tuning solution for Honda/Acura. THIS IS

FOR USE WITH A

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on TUNING - DYNO, REMOTE, E-TUNING AND TRAVEL (PRICING AND Dyno Tuning Our speciality is Honda/Acura Engine Tuning using the proper equipment, methods and software to provide peak performance and reliability to achieve the most enjoyment out of your entire setup. I am EFI University Certified and whether you are looking for

NEPTUNE SOFTWARE

Hondata FlashPRO. $690.00 $695.00. Hondata KPRO (Kpro4) $690.00 $695.00. Hondata S300 Version 3. $490.00 $495.00. Xenocron SST27SF512 Version 2 Eprom Chip. $15.00 $19.95. Contact us. CHIPPED OBD1 VTEC ECU ***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** Honda OBD1 VTEC ECU (P28 Equivalent for VTEC) We also offer a basic VTEC ECU conversion parts kit that runs identical to any P28 VTEC ECU. Socketed and ready to go for chip applications like Neptune, Crome, eCtune, Uberdata, or Hondata (S100/S200). Also available for ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa MOATES USB APU1 AUTOPROM PACKAGE The APU1 is an all-in-one device aimed at the OBD1 GM platform. It burns and reads chips, does ALDL datalogging and realtime chip emulation in one USB device that does not require an external power supply! Specifically, it programs AT29C256, 27SF512 chips and reads 27C32, 27C128, 27C256, 27C512 chips. Performs ALDL com JE PROSEAL HEAD GASKETS JE Pro Seal Headgaskets for various Honda / Acura Engines Various Bores - .033" Thick These have proven themselves to work in various engines ranging from 200 horsepower to 1000 horsepower. Premium Raw Materials: Every JE Pro Seal Head gasket utilizes the best raw materials available like AISI 304 Stainless Steel. Stat T1 CAM TRIGGER KIT B SERIES Kit includes a BLACK bracket, Cam Trigger Sensor, and single BLACK cam gear only! Use the add-on to add a matching Golden Eagle Black/Black cam gear to make a matching color set. The use of this kit allows you to change from the factory Honda mag sensors in the distributor to a HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

AFTERMARKET BRAKE PARTS 4 8 12 16. Wilwood Disc Brake Clevis. This is a Clevis used in Our Brake Booster Delete kits. This is a Clevis used in Our Brake Booster Delete kits. $10.00. Add to cart. SALE. ASP Brake Booster Delete Kit. This kit eliminates the factory brake booster on most 92+ Honda/Acura

vehicles.

XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

AFTERMARKET BRAKE PARTS 4 8 12 16. Wilwood Disc Brake Clevis. This is a Clevis used in Our Brake Booster Delete kits. This is a Clevis used in Our Brake Booster Delete kits. $10.00. Add to cart. SALE. ASP Brake Booster Delete Kit. This kit eliminates the factory brake booster on most 92+ Honda/Acura

vehicles.

XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. TUNING - DYNO, REMOTE, E-TUNING AND TRAVEL (PRICING AND Dyno Tuning Our speciality is Honda/Acura Engine Tuning using the proper equipment, methods and software to provide peak performance and reliability to achieve the most enjoyment out of your entire setup. I am EFI University Certified and whether you are looking for

NEPTUNE SOFTWARE

Hondata FlashPRO. $690.00 $695.00. Hondata KPRO (Kpro4) $690.00 $695.00. Hondata S300 Version 3. $490.00 $495.00. Xenocron SST27SF512 Version 2 Eprom Chip. $15.00 $19.95. Contact us. ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category.

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

NEPTUNE - XENOCRON

Tunerview RD2 Replacement Cable. This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 Pin -(Neptune/RTP,KTunerECU,Nismotronic) RD2C02 - Straight w/ OBD2 Connector - (OBD2,KTunerFlash, FlashPro) RD2C03 - Straight Loose - (CAN ECUs:AEM Infinity, HONDA B SERIES CAM DEGREE KIT Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. BURN2 CAR USB CHIP PROGRAMMER The BURN2 USB chip programmer has all the functionality of the Burn1 but is smaller and uses a mini-USB cable. The new "heartbeat" LED light lets you know whether a chip is in the burner and if it is positioned in the correct direction.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a T1 CAM TRIGGER KIT B SERIES Kit includes a BLACK bracket, Cam Trigger Sensor, and single BLACK cam gear only! Use the add-on to add a matching Golden Eagle Black/Black cam gear to make a matching color set. The use of this kit allows you to change from the factory Honda mag sensors in the distributor to a DYNO DESIGNS TYRANNOSAUR TIGHTENER (B/D-SERIES) The Tyrannosaur Tightener is a shift knuckle. It fits Honda linkage style transmissions (B and D series NOW INCLUDING JDM Type R Linkages). It was designed to replace the factory Roll Pin or Bitch Pin, as it is more commonly referred to as. HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

AFTERMARKET BRAKE PARTS 4 8 12 16. Wilwood Disc Brake Clevis. This is a Clevis used in Our Brake Booster Delete kits. This is a Clevis used in Our Brake Booster Delete kits. $10.00. Add to cart. SALE. ASP Brake Booster Delete Kit. This kit eliminates the factory brake booster on most 92+ Honda/Acura

vehicles.

XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

AFTERMARKET BRAKE PARTS 4 8 12 16. Wilwood Disc Brake Clevis. This is a Clevis used in Our Brake Booster Delete kits. This is a Clevis used in Our Brake Booster Delete kits. $10.00. Add to cart. SALE. ASP Brake Booster Delete Kit. This kit eliminates the factory brake booster on most 92+ Honda/Acura

vehicles.

XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness. 11F0 BOARD VTEC CONVERSION KIT 11F0 Board VTEC Conversion Kit - Installation Instructions Print. First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They may be hard to find, but they are there. If a component is already in the ECU, do not remove it or replace it with a component we have supplied. Some ECUs have these parts already. TUNING - DYNO, REMOTE, E-TUNING AND TRAVEL (PRICING AND Dyno Tuning Our speciality is Honda/Acura Engine Tuning using the proper equipment, methods and software to provide peak performance and reliability to achieve the most enjoyment out of your entire setup. I am EFI University Certified and whether you are looking for

NEPTUNE SOFTWARE

Hondata FlashPRO. $690.00 $695.00. Hondata KPRO (Kpro4) $690.00 $695.00. Hondata S300 Version 3. $490.00 $495.00. Xenocron SST27SF512 Version 2 Eprom Chip. $15.00 $19.95. Contact us. ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category.

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

NEPTUNE - XENOCRON

Tunerview RD2 Replacement Cable. This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 Pin -(Neptune/RTP,KTunerECU,Nismotronic) RD2C02 - Straight w/ OBD2 Connector - (OBD2,KTunerFlash, FlashPro) RD2C03 - Straight Loose - (CAN ECUs:AEM Infinity, HONDA B SERIES CAM DEGREE KIT Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. BURN2 CAR USB CHIP PROGRAMMER The BURN2 USB chip programmer has all the functionality of the Burn1 but is smaller and uses a mini-USB cable. The new "heartbeat" LED light lets you know whether a chip is in the burner and if it is positioned in the correct direction.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a T1 CAM TRIGGER KIT B SERIES Kit includes a BLACK bracket, Cam Trigger Sensor, and single BLACK cam gear only! Use the add-on to add a matching Golden Eagle Black/Black cam gear to make a matching color set. The use of this kit allows you to change from the factory Honda mag sensors in the distributor to a DYNO DESIGNS TYRANNOSAUR TIGHTENER (B/D-SERIES) The Tyrannosaur Tightener is a shift knuckle. It fits Honda linkage style transmissions (B and D series NOW INCLUDING JDM Type R Linkages). It was designed to replace the factory Roll Pin or Bitch Pin, as it is more commonly referred to as. HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category.

NEPTUNE SOFTWARE

Hondata FlashPRO. $690.00 $695.00. Hondata KPRO (Kpro4) $690.00 $695.00. Hondata S300 Version 3. $490.00 $495.00. Xenocron SST27SF512 Version 2 Eprom Chip. $15.00 $19.95. Contact us. XENOCRON EMAP BACKPRESSURE DAMPER This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure on your turbocharged vehicle. This item is for the damper only but to completely install this you might require fittings, line, and a sensor. ***IF YOU HAVE ANY QUESTIONS

PLEASE CALL

CHIPPED OBD1 VTEC ECU ***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** Honda OBD1 VTEC ECU (P28 Equivalent for VTEC) We also offer a basic VTEC ECU conversion parts kit that runs identical to any P28 VTEC ECU. Socketed and ready to go for chip applications like Neptune, Crome, eCtune, Uberdata, or Hondata (S100/S200). Also available for

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform

NEPTUNE - XENOCRON

Tunerview RD2 Replacement Cable. This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 Pin -(Neptune/RTP,KTunerECU,Nismotronic) RD2C02 - Straight w/ OBD2 Connector - (OBD2,KTunerFlash, FlashPro) RD2C03 - Straight Loose - (CAN ECUs:AEM Infinity, DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a 5.0 DARTON COYOTE CYLINDER SLEEVES This Darton Ford Coyote 5.0 MID Cylinder Sleeve Kit improves block integral strength and cooling and increases horsepower output potential. Get it today! HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

HONDA/ACURA TUNING PARTS & FUEL MANAGEMENT Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port

of the

XENOCRON BASEMAPS

Basemap. Our Xenocron Basemaps collection offers base map chips made with Crome Tuning, a car tuning software, and our files for applications, where we can email you the file for your KTuner or Hondata OEM ecu based systems. We can also offer stand-alone base maps for Haltech, Motec and AEM. If you need help getting started on your

next Honda

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category. XENOCRON DIY WHEEL SPEED SENSOR KIT (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speedetc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on HONDATA KPRO W/ K-SERIES SWAP ECU This package is for a Hondata KPRO installed in a K-Series SWAP ECU (Swap Alternative). The swap ECU's are for K-Swapped cars only! NO CORE NEEDED Learn more about the Swap Alternative ECUS We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO boa

CROME PRO LICENSE

Crome Pro License. This item is for payment for a Single User Crome PRO License. Crome PRO opens up the datalogging features within Crome PRO so that you may tune your own car using this software and other DIY hardware we carry. Besides the creator of Crome (John Cui of www.tunewithcrome.com), we are the only other authorized distributor

of

K20 ENGINE HARNESS

Honda K-Series Engine Harness Connector Kit. This K20 kit was designed to be used when you are terminating your own complete engine harness.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

HOW TO SETUP AND BURN SST CHIPS WITH CROME : XENOCRON Right Click on the COM, and choose PROPERTIES. Click on the PORT SETTINGS Tab and choose ADVANCED which opens this screen. Make sure the LATENCY TIMER is set to “1” instead of 16 which is the default value. Now, ok or close all of those windows and unplug the device and then plug it back in. This resets everything and as long as you plug

it

ECU ELECTRONICS & CAR TUNING ECU TOOLS This collection will be dedicated to ECU brands/tools and Electronics for tuning. It includes brands with standalone ECUs (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other car tuning tools and solutions for Do-It-Yourselfers, along with complimentary products that also fit into this category.

NEPTUNE SOFTWARE

Hondata FlashPRO. $690.00 $695.00. Hondata KPRO (Kpro4) $690.00 $695.00. Hondata S300 Version 3. $490.00 $495.00. Xenocron SST27SF512 Version 2 Eprom Chip. $15.00 $19.95. Contact us. XENOCRON EMAP BACKPRESSURE DAMPER This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure on your turbocharged vehicle. This item is for the damper only but to completely install this you might require fittings, line, and a sensor. ***IF YOU HAVE ANY QUESTIONS

PLEASE CALL

CHIPPED OBD1 VTEC ECU ***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** Honda OBD1 VTEC ECU (P28 Equivalent for VTEC) We also offer a basic VTEC ECU conversion parts kit that runs identical to any P28 VTEC ECU. Socketed and ready to go for chip applications like Neptune, Crome, eCtune, Uberdata, or Hondata (S100/S200). Also available for

CHIPPED P72 ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING*** This is for a USDM Manual Chipped P72 ECU. This is an ACTUAL P72 ECU. This ECU comes ZIF Socketed with a basemap chip just like our normal ECUs. Please make sure you specify the details of your setup so that I can make the basemap for you. The most important inform

NEPTUNE - XENOCRON

Tunerview RD2 Replacement Cable. This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 This is a replacement cable for the Tunerview RD2 CABLE OPTIONS: RD2C01 - Straight Lose + 4 Pin -(Neptune/RTP,KTunerECU,Nismotronic) RD2C02 - Straight w/ OBD2 Connector - (OBD2,KTunerFlash, FlashPro) RD2C03 - Straight Loose - (CAN ECUs:AEM Infinity, DARTON FORD MODULAR 4.6 MID SLEEVE KIT Many production cast iron and aluminum blocks suffer from a design weakness of cylinder stability by nature of poor support at the upper deck area. The manufacturing process of "cast in sleeves" provides for economy of scale in low horsepower engines, but does not accommodate high horsepower, high boost, or larger bore ECU WIDEBAND SETUP GUIDE BY XENOCRON : XENOCRON TUNING D.I.Y. Wideband Setup Guide by Xenocron. This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input, log and use the reading in a variety of “chip based” applications including Hondata S300, Hondata KPRO, Neptune and for standalone ECUs Haltech (Platium Series or Plug and Play) and

AEM Version 2 ECUs.

BOSCH 044 FUEL PUMP

Xenocron Tuning is now carrying the popular Bosch Motorsports Genuine 044 fuel pumps. This fuel pump is one of the most popular aftermarket fuel pump. These are the real thing (no copies) and are capable of 650+ HP in combo with an in-tank fuel pump or more if running a 5.0 DARTON COYOTE CYLINDER SLEEVES This Darton Ford Coyote 5.0 MID Cylinder Sleeve Kit improves block integral strength and cooling and increases horsepower output potential. Get it today!

Support

* __My account

USD

* USD

* EUR

* GBP

__0

__

__

* About us __

*

* Support

* Search

* Contact Us

* Catalog __

*

SOLUTIONS __

* ECUs and Electronics

* Fuel System

* Chipping Kits/Components

* Basemaps

* Xenocron Parts

* Services

* Shop By Brand

HARD PARTS __

* Engine

* Drivetrain/Transmission

* Forced Induction

* Chassis/Suspension

* Intake/Exhaust

* Brakes

FUNDAMENTALS __

* Interior

* Exterior

* Fabrication

* Tools

* Oil/Fluids

* Accessories

* Apparel

* Wheels/Tires

SAVINGS __

* Packages / Combo Deals * Sales and Specials * Used / Consignment * Overstock/Clearance

* Featured

* Blog

* Sale __

*

Xenocron EMAP Backpressure Kit

$109.95 $129.00

Hondata S300 Version 3

$490.00 $495.00

Hondata KPRO (Kpro4)

$690.00 $695.00

Hondata FlashPRO

$690.00 $695.00

* Contact us

INFO

BUY

BUY

INFO

INFO

BUY

ECUs Electronics

Fueling (Fuel Systems) Packages Combo Deals

Forced Induction

Engine Hard Parts

Drivetrain Transmission

Tools

Intake Exhaust

Sales Specials

FEATURED PRODUCTS

Xenocron DIY Wheel Speed Sensor Kit (RWSS) Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily ... Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speed...etc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on your Standalone Engine Management System or replace your Transmission mounts VSS (vehicle speed sensor) to use Rear Wheel speed (Ground Speed) versus Front Wheel Speed. Kit Includes: Magnetic Hall Effect Speed Sensor 10' Shi...

– (8 variants)

__Add to cart

SALE

Xenocron EMAP Backpressure Kit Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you... Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you to add or log an Exhaust Manifold Pressure Readings through your ECU or datalogger This kit includes: (1) Backpressure Canister (Pressure Pulsation Damper) (1) Steel 1/8" NPT Weld Fitting (2) Compression Fittings (1 90 deg, 1 straight) 3 Feet of Flexible Copper Tubing Optional on this kit is an AEM 3.5 bar or 5.0 bar map sensor, or if you would like to use your own map sensor, you can choose th...

– (3 variants)

__Add to cart

Xenocron B-Series Complete Cam Degree Kit Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in... Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (B-Beam) (1) Aluminum mount for center dial indicator (...

$249.00

__Add to cart

Xenocron 3 Port PWM Boost Solenoid Kit Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and AEM. This is a... Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and AEM. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port of the solenoid and wiring. Please consult your tuner for how this should be installed to your specific application as there are different ways to install this

solenoid. If yo...

– (4 variants)

__Add to cart

Xenocron H-Series Complete Cam Degree Kit Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in... Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your H-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (H-Beam) (1) Aluminum mount for center dial indicator (...

$249.00

__Add to cart

Xenocron All-One Cam Degree Kit for B, H, K, & S2K Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in... Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B, H, & K-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (K-Beam) (1) Aluminum mount

for center dial...

$399.00

__Add to cart

Xenocron K-Series Complete Cam Degree Kit Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in... Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your K-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (K-Beam) (1) Aluminum mount for center dial indicator (...

$249.00

__Add to cart

Xenocron Oil Take Off Adapter - Dual Outlet These fittings are custom machined and are the perfect solution for those looking to utilize the ... These fittings are custom machined and are the perfect solution for those looking to utilize the oil pressure sender port as an oil source.   The fittings has the proper 1/8\" BSPT male threads to go into the back of the block on most Honda/Acura engines (as well as other brands, be sure to check yours for compatibility before ordering). On the opposite end are the correct female threads for reinstalling your pressure sender. These adapters have two ports on the side with 1/8\"NPT female thre...

$19.95

__Add to cart

Haltech IC-7 Display Dash Haltech IC-7 Display Dash: A New Way of Seeing Things With a crisp, clear and full colour displ... Haltech IC-7 Display Dash: A New Way of Seeing Things With a crisp, clear and full colour display, the all new Haltech IC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the IC-7 offers market-leading features in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-colour shift light bar, the IC-7 connects directly to all current Haltech ECUs vi...

$889.00

__Add to cart

Hondata S300 w/ OBD1 ECU and PLX Wideband Hondata S300 V3 ECU and DM-6 Wideband Package Kit This package includes the following: Hondata S... Hondata S300 V3 ECU and DM-6 Wideband Package Kit This package includes the following: Hondata S300 Unit OBD1 Chipped ECU PLX DM-6 Wideband Hondata S300 The s300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features. PLX DM-6 Wideband The PLX Wideband AFR (UEGO) gauge comb...

$750.00

__Add to cart

POPULAR BRANDS

Xenocron 137 products Race Spec 22 products

KTUNER 23 products

Hondata Systems 5 products

OUR SERVICES

We offer in-house Dyno Tuning with our AWD Mainline in our engineered Dyno Cell. We offer stock ECU modifications and installation on OBD1 and K-Series Applications using Hondata, KTuner, Neptune and more. We also offer E-Tuning, Remote and we can even fly to you if the project requires. See more about what we can do.

Read more

FEATURED BLOG POSTS

Monday, December 17, 2018 Chris Harris

Launch Date

As we approach the launch date for the new store on December 26th, 2018 I am reflecting on the year...

Read more

Friday, July 20, 2018 Chris Harris

We are MOVING

I will make this short and sweet.  I have been looking for a new building for a couple of years...

Read more

Sunday, December 31, 2017 Chris Harris

The new website

Here it is the last day of 2017 and I am slaving away at setting up the new online webstore. ...

Read more

FOLLOW @XENOCRONTUNING ON INSTAGRAM

QUICK LINKS

* Home Page

* About Us

* News

* Manufacturers

* Brands

NEED HELP?

* Support

* Search

* Contact Us

OUR SHOP

ADDRESS

379 Spook Rock Rd

J 502

Suffern, NY 10901

PHONE

845-504-5340

EMAIL

support@xenocron.com

NEWSLETTER

Join our mailing list

__

* __

* __

* __

* __

Powered by Shopify

* __

* __

* __

* __

* __

__

Chat With Us

�