WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky

WAVIN EKOPLASTIK

Wavin Ekoplastik : Producer of plastic piping systems. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of Wavin Ekoplastik. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

SALES DEPARTMENT

Sales Department, Contacts, Wavin Ekoplastik. Export & BD Manager: Petr Trombala European countries - BG, BIH, D, E, F, GR, MK, P, ROM,

SLO

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

FLANGE ADAPTOR WITH SOCKET FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. Question Contacts. code. D

D 1 D 3. L.

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

ТАБЛИЦИ ЗА ХИДРАВЛИЧНИ ЗАГУБИ Таблици за хидравлични загуби, Изтегляне, Wavin Ekoplastik. Център за обучение. През юли 2014 в Костелец над Лабе, на територията на дружеството

Вавин

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky

WAVIN EKOPLASTIK

Wavin Ekoplastik : Producer of plastic piping systems. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of Wavin Ekoplastik. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

SALES DEPARTMENT

Sales Department, Contacts, Wavin Ekoplastik. Export & BD Manager: Petr Trombala European countries - BG, BIH, D, E, F, GR, MK, P, ROM,

SLO

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

FLANGE ADAPTOR WITH SOCKET FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. Question Contacts. code. D

D 1 D 3. L.

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

ТАБЛИЦИ ЗА ХИДРАВЛИЧНИ ЗАГУБИ Таблици за хидравлични загуби, Изтегляне, Wavin Ekoplastik. Център за обучение. През юли 2014 в Костелец над Лабе, на територията на дружеството

Вавин

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

PRODUCTS - WAVIN EKOPLASTIK Products, Wavin Ekoplastik. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of

Wavin Ekoplastik.

PIPES - WAVIN EKOPLASTIK PIPE S 2,5 PN 20. This piping is intended both for cold and drinking water, floor heating, air-conditioning and industrial distribution systems. Pipe EVO S 3,2 (16 mm) S 4 (20 – 125 mm) New all plastic pipe from new generation polypropylene PP-RCT. STABI PLUS PIPE S 3,2 (16-63mm) STABI PLUS PIPE S EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

DOWNLOADS - WAVIN EKOPLASTIK Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. PRESSURE LOSS TABLES Pressure Loss Tables, Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. POLAND - WAVIN EKOPLASTIK Poland, Reference, Wavin Ekoplastik. GDYNIA apartment house: ELBLAG - post office post office: GDAŇSK the highest building in the port

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

PRODUCTS - WAVIN EKOPLASTIK Products, Wavin Ekoplastik. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of

Wavin Ekoplastik.

PIPES - WAVIN EKOPLASTIK PIPE S 2,5 PN 20. This piping is intended both for cold and drinking water, floor heating, air-conditioning and industrial distribution systems. Pipe EVO S 3,2 (16 mm) S 4 (20 – 125 mm) New all plastic pipe from new generation polypropylene PP-RCT. STABI PLUS PIPE S 3,2 (16-63mm) STABI PLUS PIPE S EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

DOWNLOADS - WAVIN EKOPLASTIK Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. PRESSURE LOSS TABLES Pressure Loss Tables, Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

SCREW UNION

SCREW UNION – FEMALE. This fitting is intended for threaded pipe connections. Question Contacts. code. D L. L 1. POLAND - WAVIN EKOPLASTIK Poland, Reference, Wavin Ekoplastik. GDYNIA apartment house: ELBLAG - post office post office: GDAŇSK the highest building in the port

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

WATER DISTRIBUTION HEATING AND COOLING SYSTEM EKOPLASTIK Catalogue of Products 6 t D1 D t D1 D t D1 D Standard Products for Potable (Cold) and Hot Water and for Heating (I.) D mm D1 mm t mm l mm m kg/m CODE 20 15,6 2,2 4000 100 0,121 TTR020P10X

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

CENÍKY - WAVIN EKOPLASTIKTRANSLATE THIS PAGE Ceníky, Ke stažení, Wavin Ekoplastik. Školicí centrum. V červnu 2014 bylo v Kostelci nad Labem, v areálu společnosti Wavin Ekoplastik, otevřeno nové školicí centrum

WAVIN EKOPLASTIK

Wavin Ekoplastik : Producer of plastic piping systems. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of Wavin Ekoplastik.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

WATER DISTRIBUTION HEATING AND COOLING SYSTEM EKOPLASTIK Catalogue of Products 6 t D1 D t D1 D t D1 D Standard Products for Potable (Cold) and Hot Water and for Heating (I.) D mm D1 mm t mm l mm m kg/m CODE 20 15,6 2,2 4000 100 0,121 TTR020P10X

WAVIN EKOPLASTIK

Wavin Ekoplastik : Vnitřní instalace a inženýrské sítě. Průměry 160 – 250 mm. Součástí Systému Ekoplastik pro velké průměry jsou celoplastové trubky, třívrstvé trubky a tvarovky SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

CENÍKY - WAVIN EKOPLASTIKTRANSLATE THIS PAGE Ceníky, Ke stažení, Wavin Ekoplastik. Školicí centrum. V červnu 2014 bylo v Kostelci nad Labem, v areálu společnosti Wavin Ekoplastik, otevřeno nové školicí centrum

PRODUCT CATALOGUE

Catalogue Ekoplastik System - Grey* Catalogue Ekoplastik System - Green. *Catalogue Ekoplastik System - GREY - include: Catalogue Ekoplastik System. Catalogue Ekoplastik System - Diameters 160 - 250 mm - Green. Manifolds made of PP-RCT.

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB)

CERTIFICATES

DVGW PPR Certificate dia 75-125 mm. Poland. National Declaration of Performance Fittings PP-R. National Declaration of Performance Pipes PP-R. National Declaration of Performance Valves PP-R. National Declaration of Performance FIBER BASALT PLUS. National Declaration of DOWNLOADS - WAVIN EKOPLASTIK Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of LABELING OF PLASTIC PIPES Labeling of plastic pipes. The plastic pipes have standardized outer diameter and wall thickness. Pipes of identical material with different wall thickness have different service parameters (service pressure / service temperature / service life). The pipes were divided into pressure series designated “PN” according to wall thickness

originally.

WATER DISTRIBUTION HEATING AND COOLING SYSTEM EKOPLASTIK Catalogue of Products 6 t D1 D t D1 D t D1 D Standard Products for Potable (Cold) and Hot Water and for Heating (I.) D mm D1 mm t mm l mm m kg/m CODE 20 15,6 2,2 4000 100 0,121 TTR020P10X FLANGE ADAPTOR WITH SOCKET FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. Question Contacts. code. D

D 1 D 3. L.

UNDERFLOOR HEATING SYSTEM MANIFOLDS MADE OF PP-RCT 2 Manifold ad -RCT aalogue Tel 42 2 8 1 a 42 2 8 10 New! Underfloor heating made of PP-RCT We present you a unique system of plastic manifold sets. Now it SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

WAVIN EKOPLASTIKWEB VIEW Author: Vladimír Děček Last modified by: Barbora Kube Created Date: 2/5/2006 9:51:25 AM Company: Wavin Other titles: rev.šachty315 reviz.šachty400 Tegra425 Tegra600 Tegra1000 TEGRA 1000NG spojky IN-SITU Tegra425!Názvy_tisku Tegra600!Názvy_tisku

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of POLAND - WAVIN EKOPLASTIK Poland, Reference, Wavin Ekoplastik. GDYNIA apartment house: ELBLAG - post office post office: GDAŇSK the highest building in the port

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB) FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of POLAND - WAVIN EKOPLASTIK Poland, Reference, Wavin Ekoplastik. GDYNIA apartment house: ELBLAG - post office post office: GDAŇSK the highest building in the port PRODUCTS - WAVIN EKOPLASTIK Products, Wavin Ekoplastik. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of

Wavin Ekoplastik.

PRODUCT CATALOGUE

Catalogue Ekoplastik System - Grey* Catalogue Ekoplastik System - Green. *Catalogue Ekoplastik System - GREY - include: Catalogue Ekoplastik System. Catalogue Ekoplastik System - Diameters 160 - 250 mm - Green. Manifolds made of PP-RCT. PIPES - WAVIN EKOPLASTIK PIPE S 2,5 PN 20. This piping is intended both for cold and drinking water, floor heating, air-conditioning and industrial distribution systems. Pipe EVO S 3,2 (16 mm) S 4 (20 – 125 mm) New all plastic pipe from new generation polypropylene PP-RCT. STABI PLUS PIPE S 3,2 (16-63mm) STABI PLUS PIPE S CONTACTS - WAVIN EKOPLASTIK Contacts, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm.

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik EKOPLASTIK SYSTEM INSTALLATION MANUAL I 2 N 420 326 983 111 FX 420 326 983 110 I ekoplastikekoplastik.c contents 1. Utilisation of Ekoplastik System 5 2. Guarantee Terms and

Conditions 5

PRESSURE LOSS TABLES Pressure Loss Tables, Downloads, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of SYSTÉMY PRO HOSPODAŘENÍ S DEŠŤOVOU VODOU Montážní předpis a katalog výrobků 1. vydání 2012 Systémy pro hospodaření s dešťovou vodou Filtrace • Zasakování a retence

Regulace odtoku

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of PRODUCTS - WAVIN EKOPLASTIK Products, Wavin Ekoplastik. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of

Wavin Ekoplastik.

PRODUCT CATALOGUE

Catalogue Ekoplastik System - Grey* Catalogue Ekoplastik System - Green. *Catalogue Ekoplastik System - GREY - include: Catalogue Ekoplastik System. Catalogue Ekoplastik System - Diameters 160 - 250 mm - Green. Manifolds made of PP-RCT. PIPES - WAVIN EKOPLASTIK PIPE S 2,5 PN 20. This piping is intended both for cold and drinking water, floor heating, air-conditioning and industrial distribution systems. Pipe EVO S 3,2 (16 mm) S 4 (20 – 125 mm) New all plastic pipe from new generation polypropylene PP-RCT. STABI PLUS PIPE S 3,2 (16-63mm) STABI PLUS PIPE S CONTACTS - WAVIN EKOPLASTIK Contacts, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB)

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm.

SALES DEPARTMENT

Sales Department, Contacts, Wavin Ekoplastik. Export & BD Manager: Petr Trombala European countries - BG, BIH, D, E, F, GR, MK, P, ROM,

SLO

WATER DISTRIBUTION HEATING AND COOLING SYSTEM EKOPLASTIK Catalogue of Products 6 t D1 D t D1 D t D1 D Standard Products for Potable (Cold) and Hot Water and for Heating (I.) D mm D1 mm t mm l mm m kg/m CODE 20 15,6 2,2 4000 100 0,121 TTR020P10X PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

WAVIN EKOPLASTIK

Created Date: 1/18/2017 12:03:59 PM

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

WAVIN EKOPLASTIK

Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm. PRODUCTS - WAVIN EKOPLASTIK Pipes and fitings from PP-RCT 160 – 250 mm. The system consists of pipes and fittings with diameters between 160-250 mm.

ABOUT THE COMPANY

EKOPLASTIK is present on the market of plastic piping systems since 1990. In November 2004 multination corporation Wavin entered Ekoplastik company. Head office of Wavin Ekoplastik is situated in Kostelec nad Labem, about 20 km north of Czech Republic's capital Prague. There are except the management also production and business

department.

ALL-PLASTIC FITTINGS CROSSOVER WITH.SOCKET S 2,5 PN20. COMPENSATION PIPE S 2,5 (PN20) This fitting is intended for compensation of expansion changes. FLANGE ADAPTOR WITH SOCKET. Together with free metal flanges, flange adaptors are used for coupling of pipes. ALL-PLASTIC REDUCER MALE THREAD. This fitting is intended for temporary threaded connections. SPACING DISTANCES BETWEEN SUPPORTS Horizontal Vertical. Pressure range / pipe type: PN10 PN16 PN20 EVO. Pipe diameter: 16 20 25 32 40 50 63 75 90 110 125. Water temperature: Result: maximum spacing distance between supports L

= Recapitulation:

EUROKONUS - WAVIN EKOPLASTIK Eurokonus, , Ekoplastik System - water and heating, Products, Wavin

Ekoplastik

VALVE EXTENSION

VALVE extension, Combined fittings, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm. FIBER BASALT CLIMA S 4 (20-25 MM) FIBER BASALT CLIMA S 5 FIBER BASALT CLIMA pipes are marked according to "S" series. Previous way of marking the pipes with "PN" number can not be used for pipes made of new generation material PP-RCT, because working parameters of such pipes (pressure, temperature, service life) signifi cantly exceed

those of

BULGARIA - WAVIN EKOPLASTIK Bulgaria, Reference, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of PRODUCTS - WAVIN EKOPLASTIK Products, Wavin Ekoplastik. TRAINING CENTER. In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of

Wavin Ekoplastik.

PRODUCT CATALOGUE

Catalogue Ekoplastik System - Grey* Catalogue Ekoplastik System - Green. *Catalogue Ekoplastik System - GREY - include: Catalogue Ekoplastik System. Catalogue Ekoplastik System - Diameters 160 - 250 mm - Green. Manifolds made of PP-RCT. PIPES - WAVIN EKOPLASTIK PIPE S 2,5 PN 20. This piping is intended both for cold and drinking water, floor heating, air-conditioning and industrial distribution systems. Pipe EVO S 3,2 (16 mm) S 4 (20 – 125 mm) New all plastic pipe from new generation polypropylene PP-RCT. STABI PLUS PIPE S 3,2 (16-63mm) STABI PLUS PIPE S CONTACTS - WAVIN EKOPLASTIK Contacts, Wavin Ekoplastik. The company Wavin Czechia aims at better and more efficient solutions in the field of

TECHNICAL SHEETS

TECHNICAL SHEETS. EVO All plastic pipe from PP-RCT (PDF 335 kB) Electro-fusion sockets from PP-RCT (PDF 807 kB) Electrofusion socket welding procedure (PDF 125 kB) Ending wall elbow (PDF 657 kB)

COMBINED FITTINGS

This fitting is intended for connection of outlets fittings beyond the fitting. ELBOW 90° FOR WALL MOUNTING WITH METAL MALE THREAD. Designed for connecting plumbing fittings (batteries, valve) WALL ELBOWS WITH HOLDER. Designed for connection of outlet valves with bottom connection with a spacing of 150 mm.

SALES DEPARTMENT

Sales Department, Contacts, Wavin Ekoplastik. Export & BD Manager: Petr Trombala European countries - BG, BIH, D, E, F, GR, MK, P, ROM,

SLO

WATER DISTRIBUTION HEATING AND COOLING SYSTEM EKOPLASTIK Catalogue of Products 6 t D1 D t D1 D t D1 D Standard Products for Potable (Cold) and Hot Water and for Heating (I.) D mm D1 mm t mm l mm m kg/m CODE 20 15,6 2,2 4000 100 0,121 TTR020P10X PIPE PP-RCT, S 5 / SDR 11 Pipe PP-RCT, S 5 / SDR 11, Pipes 160 – 250 mm, Pipes and fitings from PP-RCT 160 – 250 mm, Ekoplastik System - water and heating, Products, Wavin Ekoplastik

WAVIN EKOPLASTIK

Created Date: 1/18/2017 12:03:59 PM This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. Find out more

I understand

Language

english

* čeština

* РУССКИЙ

* Български * беларускі

FIND: For

Professionals

* Home

* Products

* Downloads

* Reference

* Why Ekoplastik

* About the company

* Contacts

* 1

* 2

* 3

* 4

* 5

* 6

* 7

* 8

* 9

-------------------------

WATER AND HEATING

Polypropylene plastic piping systems - hot and cold water distribution

systems

more...

AIR CONDITIONING SYSTEMS Elimination of linear thermal expansion changes due to varying temperature of water in the system

more...

PIPES AND FITINGS FROM PP-RCT 160 – 250 MM The system consists of pipes and fittings with diameters between

160-250 mm

more...

WAVIN

EKOPLASTIK CALCULATOR

more...

-------------------------

NEWS

29.1.2019

AQUATHERM MOSCOW 2019 Wavin Ekoplastik took part in trade fair Aquatherm Moscow 2019

more...

DOWNLOAD

* Product Catalogue

* Assembly instructions * Pressure Loss Tables

* Certificates

TRAINING CENTER

In June 2014 a new training centre was opened in Kostelec nad Labem in the premises of Wavin Ekoplastik.

more...

WHY US?

Full range of PPR pipes and shaped fittings of diameters ranging from

16 to 125 mm

more...

� Copyright Wavin Ekoplastik

Topinfo CMS