SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade TRIMAX™ PPSU PRODUCTS PPSU Model Material. Support Materials. Shop by Printer Type. Fortus® 900mc/F900 Filaments. Fortus® 450mc Filaments. Fortus® 400mc Filaments. Fortus® 380mc Filaments. Fortus® 360mc Filaments. Fortus® 250mc Filaments. REFILL YOUR STRATASYS PRINTER WITH CARBON FIBER ABS USING Now you can use this advanced composite material to improve the performance of your parts. No modifications required! If your Stratasys® printer can print with ABS (P400, P430, or M30), then you can refill your cartridge or canister and print with our Carbon Fiber ABS. Large Order Quantity Discounts. TERMS AND CONDITIONS Terms and Conditions. Acceptance of these Terms and Conditions. These Terms and Conditions of Sale (“Terms”) by Triton3D LLC (“Seller” or “us” or “we”) shall apply to any order for products of Triton3D LLC (“Products”) sold on www.triton3d.com (the “Site”) or where explicitly applicable or through a current authorized reseller of Products (“Authorized Party” or CARBON FIBER NYLON 12CF FOR FORTUS® PRINTERS TriMax™ Nylon 12CF Filament. TriMax CF Nylon 12 was formulated to be 100% compatible with your Stratasys Fortus® printers and comes with a replacement EEPROM chip at a fraction of the cost of OEM Stratasys®

branded filament.

BREAK AWAY SUPPORT FOR STRATASYS DIMENSION PRINTERS Break Away Support (56in3) for ABS and ASA on Fortus® 250mc Printers. $250.00 $110.00. Options. SALE! ABS Filament Refill (56in3) for Dimension® and Fortus® 250mc Printers. $272.00 $95.00. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

SAFETY DATA SHEET

1 safety data sheet pc-abs model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information ULTEM® 9085 PEI MODEL MATERIAL 1 safety data sheet ultem® 9085 pei model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information ULTEM® 9085 SUPPORT MATERIAL 1 safety data sheet ultem® 9085 support material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade TRIMAX™ PPSU PRODUCTS PPSU Model Material. Support Materials. Shop by Printer Type. Fortus® 900mc/F900 Filaments. Fortus® 450mc Filaments. Fortus® 400mc Filaments. Fortus® 380mc Filaments. Fortus® 360mc Filaments. Fortus® 250mc Filaments. REFILL YOUR STRATASYS PRINTER WITH CARBON FIBER ABS USING Now you can use this advanced composite material to improve the performance of your parts. No modifications required! If your Stratasys® printer can print with ABS (P400, P430, or M30), then you can refill your cartridge or canister and print with our Carbon Fiber ABS. Large Order Quantity Discounts. TERMS AND CONDITIONS Terms and Conditions. Acceptance of these Terms and Conditions. These Terms and Conditions of Sale (“Terms”) by Triton3D LLC (“Seller” or “us” or “we”) shall apply to any order for products of Triton3D LLC (“Products”) sold on www.triton3d.com (the “Site”) or where explicitly applicable or through a current authorized reseller of Products (“Authorized Party” or CARBON FIBER NYLON 12CF FOR FORTUS® PRINTERS TriMax™ Nylon 12CF Filament. TriMax CF Nylon 12 was formulated to be 100% compatible with your Stratasys Fortus® printers and comes with a replacement EEPROM chip at a fraction of the cost of OEM Stratasys®

branded filament.

BREAK AWAY SUPPORT FOR STRATASYS DIMENSION PRINTERS Break Away Support (56in3) for ABS and ASA on Fortus® 250mc Printers. $250.00 $110.00. Options. SALE! ABS Filament Refill (56in3) for Dimension® and Fortus® 250mc Printers. $272.00 $95.00. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

SAFETY DATA SHEET

1 safety data sheet pc-abs model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information ULTEM® 9085 PEI MODEL MATERIAL 1 safety data sheet ultem® 9085 pei model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information ULTEM® 9085 SUPPORT MATERIAL 1 safety data sheet ultem® 9085 support material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information CONTACT US - TRITON3D Contact Us. We're happy to answer any questions you might have regarding our products and service. Please fill out the form below if you need assistance.

FAQ - TRITON3D

Sabic's trade name for Polyetherimide (PEI) is Ultem™. Ultem™ 9085 and Ultem™ 1010 are grades of PEI from Sabic, Stratasys® did not create them. We buy our Ultem™ 9085 and 1010 resin from Sabic and extrude it into filament. Stratasys® buys the exact same

MODEL MATERIALS

PC/ABS Model Material. Our PC/ABS was created to be 100% compatible with Stratasys® PC/ABS. This product offers the high-performance properties as PC, with a little lower gloss and improved ductility due to the addition of the ABS. We supply the PC/ABS with INSTALLATION INSTRUCTIONS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. PRINTER COMPATIBILITY FOR 3D PRINTING FILAMENT ESD-Safe ABS Filament Refill (56in3) for Dimension® Printers. $295.00

$195.00.

TERMS AND CONDITIONS Terms and Conditions. Acceptance of these Terms and Conditions. These Terms and Conditions of Sale (“Terms”) by Triton3D LLC (“Seller” or “us” or “we”) shall apply to any order for products of Triton3D LLC (“Products”) sold on www.triton3d.com (the “Site”) or where explicitly applicable or through a current authorized reseller of Products (“Authorized Party” or REFILL YOUR STRATASYS PRINTER WITH CARBON FIBER ABS USING Now you can use this advanced composite material to improve the performance of your parts. No modifications required! If your Stratasys® printer can print with ABS (P400, P430, or M30), then you can refill your cartridge or canister and print with our Carbon Fiber ABS. Large Order Quantity Discounts. TRITON™ ABS (ABS-M30 TYPE) FILAMENT IS 100% COMPATIBLE ABS (ABS-M30 Type), 184in3, Extra Large Reel of Filament for Stratasys® Fortus® Printers. Triton™ ABS is 100% compatible with your Fortus® printers using the ABS-M30 settings. FORTUS UNLOCK SERVICE TO FULLY OPEN YOUR STRATASYS FORTUS Fortus® Unlocking Service. Triton can expand the material options on your existing Fortus® 360/400/900mc printers and allow you to take full advantage of your equipment. ULTEM® 9085 PEI MODEL MATERIAL 1 safety data sheet ultem® 9085 pei model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information TRITON3D | STRATASYS COMPATIBLE 3D PRINTING FILAMENT| FREEPPSU / PPSF FILAMENTPEI FILAMENTPC/ABS FILAMENTCARBON FIBER ABS FILAMENTESD-ABS

FILAMENT

Refill for Stratasys compatible consumable filaments. Including Ultem, Generic ABS P400 and P430 Alternatives, Polycarbonate, ESD-Grades ASA ABS-M30 refill alternative SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade

MODEL MATERIALS

Ultem™ PEI Model Materials. We produce our PEI 3D printing filaments using genuine Sabic ULTEM™ PEI (Polyether Imide) resins (1010 and 9085). PEI is one of the highest-performing thermoplastics in the industry with excellent mechanical, chemical, and thermal properties. ULTEM™ Print Service: We can print parts for you!

SUPPORT MATERIALS

Support Materials. We are developing a wide array of support materials suitable for use in your Stratasys printer. Break-Away Support for ABS (works great with ABS, ASA, ESD-ABS, and CF-ABS) Break-Away Support for PC. Break-Away Support for ULTEM™ 9085 & ULTEM™ 1010. Sort By: TRITON™ PC/ABS PRODUCTS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. SHOP BY SUPPORT MATERIALS Low Temp Build Sheets for Fortus® 360/380/400/450mc Printers for ABS, ASA, PC-ABS, and PC. $120.00 $99.00. Options. REPLACEMENT BUILD TIP NOZZLES FOR STRATASYS FORTUS Our Fortus compatible build tips are 33% lower priced than Stratasys tips. Made using hardened steel and compatible with carbon fiber and high temp materials. GEARBOX™ HT2 HIGH TEMPERATURE PEEK 3D PRINTER FROM … Gearbox™ HT2 High Temperature 3D Printer is ideal for printing PEEK, PEKK, Carbon Fiber, and our entire portfolio of materials. Print PEEK, PEKK, PEI, and many other grades using our flagship printer. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

CARBON FIBER NYLON 12CF FOR FORTUS® PRINTERS TriMax™ Nylon 12CF Filament. TriMax CF Nylon 12 was formulated to be 100% compatible with your Stratasys Fortus® printers and comes with a replacement EEPROM chip at a fraction of the cost of OEM Stratasys®

branded filament.

TRITON3D | STRATASYS COMPATIBLE 3D PRINTING FILAMENT| FREEPPSU / PPSF FILAMENTPEI FILAMENTPC/ABS FILAMENTCARBON FIBER ABS FILAMENTESD-ABS

FILAMENT

Refill for Stratasys compatible consumable filaments. Including Ultem, Generic ABS P400 and P430 Alternatives, Polycarbonate, ESD-Grades ASA ABS-M30 refill alternative SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade

MODEL MATERIALS

Ultem™ PEI Model Materials. We produce our PEI 3D printing filaments using genuine Sabic ULTEM™ PEI (Polyether Imide) resins (1010 and 9085). PEI is one of the highest-performing thermoplastics in the industry with excellent mechanical, chemical, and thermal properties. ULTEM™ Print Service: We can print parts for you!

SUPPORT MATERIALS

Support Materials. We are developing a wide array of support materials suitable for use in your Stratasys printer. Break-Away Support for ABS (works great with ABS, ASA, ESD-ABS, and CF-ABS) Break-Away Support for PC. Break-Away Support for ULTEM™ 9085 & ULTEM™ 1010. Sort By: TRITON™ PC/ABS PRODUCTS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. SHOP BY SUPPORT MATERIALS Low Temp Build Sheets for Fortus® 360/380/400/450mc Printers for ABS, ASA, PC-ABS, and PC. $120.00 $99.00. Options. REPLACEMENT BUILD TIP NOZZLES FOR STRATASYS FORTUS Our Fortus compatible build tips are 33% lower priced than Stratasys tips. Made using hardened steel and compatible with carbon fiber and high temp materials. GEARBOX™ HT2 HIGH TEMPERATURE PEEK 3D PRINTER FROM … Gearbox™ HT2 High Temperature 3D Printer is ideal for printing PEEK, PEKK, Carbon Fiber, and our entire portfolio of materials. Print PEEK, PEKK, PEI, and many other grades using our flagship printer. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

CARBON FIBER NYLON 12CF FOR FORTUS® PRINTERS TriMax™ Nylon 12CF Filament. TriMax CF Nylon 12 was formulated to be 100% compatible with your Stratasys Fortus® printers and comes with a replacement EEPROM chip at a fraction of the cost of OEM Stratasys®

branded filament.

SUPPORT MATERIALS

Support Materials. We are developing a wide array of support materials suitable for use in your Stratasys printer. Break-Away Support for ABS (works great with ABS, ASA, ESD-ABS, and CF-ABS) Break-Away Support for PC. Break-Away Support for ULTEM™ 9085 & ULTEM™ 1010. Sort By:

MODEL MATERIALS

ABS Model Material. Triton™ ABS has been rigorously tested and approved by companies large and small. Our ABS has excellent performance and value - proving to be an cost-effective alternative to expensive Stratasys® ABS. Stop paying high prices for filament! TRITON™ PC/ABS PRODUCTS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems.

MODEL MATERIALS

PC/ABS Model Material. Our PC/ABS was created to be 100% compatible with Stratasys® PC/ABS. This product offers the high-performance properties as PC, with a little lower gloss and improved ductility due to the addition of the ABS. We supply the PC/ABS with

TECH DATA & SDS

Tech Data & SDS. We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products.

FAQ - TRITON3D

Sabic's trade name for Polyetherimide (PEI) is Ultem™. Ultem™ 9085 and Ultem™ 1010 are grades of PEI from Sabic, Stratasys® did not create them. We buy our Ultem™ 9085 and 1010 resin from Sabic and extrude it into filament. Stratasys® buys the exact same PRINTER COMPATIBILITY FOR 3D PRINTING FILAMENT ESD-Safe ABS Filament Refill (56in3) for Dimension® Printers. $295.00

$195.00.

REFILL YOUR STRATASYS PRINTER WITH CARBON FIBER ABS USING Now you can use this advanced composite material to improve the performance of your parts. No modifications required! If your Stratasys® printer can print with ABS (P400, P430, or M30), then you can refill your cartridge or canister and print with our Carbon Fiber ABS. Large Order Quantity Discounts. TECHNICAL DATA SHEET: ULTEM® 9085 MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.34 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 55

ULTEM® 9085 PEI MODEL MATERIAL 1 safety data sheet ultem® 9085 pei model material effective date: 05 / 01 / 2017 revision number: v1.0 1 product and supplier information TRITON3D | STRATASYS COMPATIBLE 3D PRINTING FILAMENT| FREEPPSU / PPSF FILAMENTPEI FILAMENTPC/ABS FILAMENTCARBON FIBER ABS FILAMENTESD-ABS

FILAMENT

Refill for Stratasys compatible consumable filaments. Including Ultem, Generic ABS P400 and P430 Alternatives, Polycarbonate, ESD-Grades ASA ABS-M30 refill alternative SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade BUILD SHEETS FOR STRATASYS FORTUS 360MC, 380MC, 400MC, AND PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. TRITON™ PC/ABS PRODUCTS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems.

MODEL MATERIALS

Ultem™ PEI Model Materials. We produce our PEI 3D printing filaments using genuine Sabic ULTEM™ PEI (Polyether Imide) resins (1010 and 9085). PEI is one of the highest-performing thermoplastics in the industry with excellent mechanical, chemical, and thermal properties. ULTEM™ Print Service: We can print parts for you! REPLACEMENT BUILD TIP NOZZLES FOR STRATASYS FORTUS Our Fortus compatible build tips are 33% lower priced than Stratasys tips. Made using hardened steel and compatible with carbon fiber and high temp materials.

TECH DATA & SDS

Tech Data & SDS. We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

CARBON FIBER ABS FOR YOUR STRATASYS FORTUS 200MC AND 250MC TriMax™ Carbon Fiber ABS. 100% compatible with Stratasys® Fortus® 200mc and 250mc printers. TriMax™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. TECHNICAL DATA SHEET: ULTEM® 9085 MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.34 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 55

TRITON3D | STRATASYS COMPATIBLE 3D PRINTING FILAMENT| FREEPPSU / PPSF FILAMENTPEI FILAMENTPC/ABS FILAMENTCARBON FIBER ABS FILAMENTESD-ABS

FILAMENT

Refill for Stratasys compatible consumable filaments. Including Ultem, Generic ABS P400 and P430 Alternatives, Polycarbonate, ESD-Grades ASA ABS-M30 refill alternative SHOP BY PRINTER TYPE Our Dimension® 1200 / Elite / 768 compatible reels are available in multiple grades of filament that are 100% compatible with your printers. Requires NO modifications to your printer. Our products were created to print using the standard settings for P400 and P430 ABS. Expand your printer's capabilities with Triton 3D's engineering-grade BUILD SHEETS FOR STRATASYS FORTUS 360MC, 380MC, 400MC, AND PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. TRITON™ PC/ABS PRODUCTS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems.

MODEL MATERIALS

Ultem™ PEI Model Materials. We produce our PEI 3D printing filaments using genuine Sabic ULTEM™ PEI (Polyether Imide) resins (1010 and 9085). PEI is one of the highest-performing thermoplastics in the industry with excellent mechanical, chemical, and thermal properties. ULTEM™ Print Service: We can print parts for you! REPLACEMENT BUILD TIP NOZZLES FOR STRATASYS FORTUS Our Fortus compatible build tips are 33% lower priced than Stratasys tips. Made using hardened steel and compatible with carbon fiber and high temp materials.

TECH DATA & SDS

Tech Data & SDS. We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products. TECHNICAL DATA SHEET: TRITON™ PC/ABS MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.14 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 40

CARBON FIBER ABS FOR YOUR STRATASYS FORTUS 200MC AND 250MC TriMax™ Carbon Fiber ABS. 100% compatible with Stratasys® Fortus® 200mc and 250mc printers. TriMax™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. TECHNICAL DATA SHEET: ULTEM® 9085 MODEL MATERIAL Physical Properties Standard Unit Metric Density ISO 1183 g/cc 1.34 Mechanical Properties Standard Unit Metric Tensile Strength, Break ISO

527 MPa 55

TECH DATA & SDS

Tech Data & SDS. We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products. INSTALLATION INSTRUCTIONS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. GEARBOX™ HT2 HIGH TEMPERATURE PEEK 3D PRINTER FROM … Gearbox™ HT2 High Temperature 3D Printer is ideal for printing PEEK, PEKK, Carbon Fiber, and our entire portfolio of materials. Print PEEK, PEKK, PEI, and many other grades using our flagship printer. PRINTER COMPATIBILITY FOR 3D PRINTING FILAMENT ESD-Safe ABS Filament Refill (56in3) for Dimension® Printers. $295.00

$195.00.

TRITON™ ABS (ABS-M30 TYPE) FILAMENT IS 100% COMPATIBLE ABS (ABS-M30 Type), 184in3, Extra Large Reel of Filament for Stratasys® Fortus® Printers. Triton™ ABS is 100% compatible with your Fortus® printers using the ABS-M30 settings. CARBON FIBER ABS FOR STRATASYS FORTUS CLASSIC AND PLUS 3D TriMax™ Carbon Fiber ABS. 100% compatible with Stratasys® Fortus® printer using the ABS-M30 EEPROM Chip (provided with your order). TriMax™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. PC-ABS FOR STRATASYS FORTUS PRINTERS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. POLYCARBONATE PC FOR STRATASYS FORTUS PRINTERS 184in3 XL Reel of Polycarbonate (PC) Filament for Fortus® Printers. Our PC filament is made using LEXAN™ Polycarbonate from Sabic IP and is 1 00% compatible with Stratasys PC for Fortus printers. This is one of the best engineering-grade polymers on the market and now you can save $$$ over the list price of Stratasys PC. POLYCARBONATE PC FOR STRATASYS FORTUS PRINTERS 92in3 Polycarbonate (PC) Filament Refill for Fortus® Printers. Our Polycarbonate (PC) is made using Lexan™PC resin from Sabic IP and is 100% compatible with your Fortus® printer while being significantly less expensive that Stratasys® PC! ULTEM 9085 REFILL FOR FORTUS STRATASYS PRINTERS PEI Filament, Made using ULTEM™ 9085 for Fortus® Printers. We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems.

CATEGORIES

*

Shop by Material Type

* ABS Filament

* ASA Filament

* ESD-ABS Filament

* Carbon Fiber ABS

* Flame Retardant ABS

* PC/ABS Filament

* Flame Retardant PC/ABS

* PC Filament

* ESD-PC Filament

* PEI Filament

* PPSU / PPSF Filament

* Support Filament

*

Shop by Printer Type

* Fortus® 250mc

* Fortus® 360mc

* Fortus® 380mc

* Fortus® 400mc

* Fortus® 450mc

* Fortus® 900mc

* Dimension® 768

* Dimension® Elite

* Dimension® 1200 Series

* F-123 Series

* XL 184in3 Reels

* Fortus Unlocking

BRANDS

* TriMax™ PEI

* Triton™ ABS

* Triton™ ASA

* Triton™ BAS

* TriMax™ CF-ABS

* TriStat™ ESD-ABS

* Triton™ PC/ABS

* Trilan™ PC

* Firewire®

* TriStat™ ESD-PC

* View All

QUICK LINKS

* 3D Print Service

* Fortus® Unlocking * Fortus® Plus Chip Information * Gearbox™ HT2 Printer

* FAQ

* Desktop Filaments

* Free Shipping

* Documentation

* Contact Us

* Shipping & Return Policy

* Privacy Policy

* __ Gift Certificates

* __ My Account

* __ Sign In or Create an Account

* __ Compare 0

Toggle Top Menu

Free Shipping on All Orders - GLOBALLY Shopping cart $0.00 __ 0

__

Search

*

* shop

*

Fortus® 360/400/900mc Compatible * PPSU / PPSF Filament

* PEI Filament

* PC/ABS Filament

* Carbon Fiber ABS Filament

* ESD-ABS Filament

* ABS Filament

* ASA Filament

Fortus® 200/250mc Compatible

* ABS Filament

* ASA Filament

* ESD-Safe ABS Filament * Carbon Fiber ABS Filament Dimension® Compatible

* ABS Filament

* ASA Filament

* ESD-ABS Filament

* Carbon Fiber ABS Filament

Support Materials

* ABS and ASA Support * ULTEM 9085 Support PEI FILAMENT, MADE USING ULTEM™ 9085 FOR FORTUS® PRINTERS We offer a wide array of filaments that are compatible with Stratasys® Fortus®, Dimension®, and legacy systems. Check out aerospace-grade material for your Fortus® system. Save at least 30% vs. OEM pricing. More Info

* 3D Print Service

* Fortus® Unlocking * Fortus® Plus Chip Information

* more __

* Gearbox™ HT2 Printer

* FAQ

* Desktop Filaments

* Free Shipping

* Documentation

* Installation Instructions

* Tech Data & SDS

* Color Chart

* Printer Compatibility

* Blog

* Contact Us

* Shipping & Return Policy

* Privacy Policy

PreviousNext

* 1

* 2

* 3

* 4

SHOP HERE

*

Shop by Material Type

* ABS Filament

* ASA Filament

* ESD-ABS Filament

* Carbon Fiber ABS

* Flame Retardant ABS

* PC/ABS Filament

* Flame Retardant PC/ABS

* PC Filament

* ESD-PC Filament

* PEI Filament

* PPSU / PPSF Filament

* Support Filament

*

Shop by Printer Type

* Fortus® 250mc

* Fortus® 360mc

* Fortus® 380mc

* Fortus® 400mc

* Fortus® 450mc

* Fortus® 900mc

* Dimension® 768

* Dimension® Elite

* Dimension® 1200 Series

* F-123 Series

* XL 184in3 Reels

* Fortus Unlocking

BRANDS

* TriMax™ PEI

* Triton™ ABS

* Triton™ ASA

* Triton™ BAS

* TriMax™ CF-ABS

* TriStat™ ESD-ABS

* Triton™ PC/ABS

* Trilan™ PC

* Firewire®

* TriStat™ ESD-PC

* View All

FEATURED PRODUCTS

*

TRIMAX™ PEI, MADE USING ULTEM® 1010 REFILL (92IN3) FOR FORTUS® 360/400/900MC PRINTERS

$685.00 $450.00

Options

*

FLAME RETARDANT PC/ABS FILAMENT REFILL (92IN3) FOR FORTUS® 360/400/900MC PRINTERS

$395.00 $295.00

Options

*

PC FILAMENT REFILL (184IN3) FOR FORTUS® 360/400/900MC PRINTERS

$785.00 $395.00

Options

*

ASA FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$295.00 $125.00

Options

*

PPSU / PPSF POLYPHENYLSULFONE (92IN3) FOR FORTUS® 360/400/900MC

PRINTERS

$713.00 $450.00

Options

*

FLAME RETARDANT ABS FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$295.00 $175.00

Options

NEW PRODUCTS

FLAME RETARDANT ABS FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$295.00 $175.00

Options

BREAK AWAY SUPPORT (184IN3) FOR ABS AND ASA ON FORTUS® 360/400/900MC

PRINTERS

$665.00 $295.00

Options

BREAK AWAY SUPPORT (92IN3) FOR ABS AND ASA ON FORTUS® 360/400/900MC

PRINTERS

$360.00 $195.00

Options

BREAK AWAY SUPPORT (56IN3) FOR ABS AND ASA ON FORTUS® 250MC PRINTERS

$250.00 $125.00

Options

FORTUS® UNLOCKING SERVICE - UNLOCK YOUR FORTUS® 360/400/900MC FOR ALL STRATASYS® MATERIALS

$995.00

Options

TRIMAX™ PEI, MADE USING ULTEM® 1010 REFILL (184IN3) FOR FORTUS® 360/400/900MC PRINTERS

$1,360.00 $895.00

Options

PreviousNext

* 1

* 2

* 3

FEATURED PRODUCT

ASA FILAMENT REFILL (56IN3) FOR FORTUS® 200/250MC PRINTERS

$295.00 $125.00

Options

ABS FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$272.00 $125.00

Options

ABS FILAMENT REFILL (56IN3) FOR FORTUS® 200/250MC PRINTERS

$272.00 $125.00

Options

ABS FILAMENT REFILL (92IN3) FOR FORTUS® 360/400/900MC PRINTERS

$360.00 $195.00

Options

ASA FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$295.00 $125.00

Options

ESD-SAFE ABS FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$295.00 $195.00

Options

ASA FILAMENT REFILL (56IN3) FOR FORTUS® 200/250MC PRINTERS

$295.00 $125.00

Options

ABS FILAMENT REFILL (56IN3) FOR DIMENSION® PRINTERS

$272.00 $125.00

Options

PreviousNext

×

SIGN UP FOR AMAZING OFFERS

Email Address

QUICK LINKS

* 3D Print Service

* Fortus® Unlocking * Fortus® Plus Chip Information * Gearbox™ HT2 Printer

* FAQ

* Desktop Filaments

* Free Shipping

* Documentation

* Contact Us

* Shipping & Return Policy

* Privacy Policy

* Sitemap

BRANDS

* TriMax™ PEI

* Triton™ ABS

* Triton™ ASA

* Triton™ BAS

* TriMax™ CF-ABS

* TriStat™ ESD-ABS

* Triton™ PC/ABS

* Trilan™ PC

* Firewire®

* TriStat™ ESD-PC

* View All

CATEGORIES

* Shop by Material Type * Shop by Printer Type

* XL 184in3 Reels

* Fortus Unlocking

* View All

FOLLOW US ON

*

� 2020 Triton3D Responsive Theme. All Rights Reserved. Sitemap | BigCommerce Premium Themes by PSDCenter

*

*

*

*

*