SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACE CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

HARDWARE - SOLUTIONS CUBED, LLC Hardware - Solutions Cubed, LLC. Motor mounts, wheels, encoders, and more. Quick View. 12V 200RPM DC Motor (MOTOR1) $12.00. Compare. Add To Cart. Quick View. 300 CPR Encoder Kit (ENC300) BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACE CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

HARDWARE - SOLUTIONS CUBED, LLC Hardware - Solutions Cubed, LLC. Motor mounts, wheels, encoders, and more. Quick View. 12V 200RPM DC Motor (MOTOR1) $12.00. Compare. Add To Cart. Quick View. 300 CPR Encoder Kit (ENC300) BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

SOLUTIONS CUBED, ELECTRONIC ENGINEEERING, ROBOTICS, MOTION Contact us for engineering needs or questions about robots, robotics, motion control, motor control, or anything else electronic. Feel free to call, fax, or email us. We're waiting to hear from you! phone- 530-891-8045 (for sales, technical support, engineering services, or any other need) fax- 530-891-1643. address - Solutions Cubed, LLC 3045 SENSORS - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino

MOTOR CONTROL

Motor controllers provide versatile interface options to speed your open loop motor control design efforts. Quick View. 6-24V 2A DC Motor Motion Controller (Synaptron Micro) $30.00. Compare. Add To Cart. Quick View. 6-24V 2A Dual DC Motor Controller (Motor Mind C) $37.00. FIRSTBOT ARDUINO COMPATIBLE ROBOT CONTROLLER The Firstbot robot controller is a versatile module for controlling robots and other electromechanical systems. The Firstbot includes Arduino-compatible hardware allowing you to program the system with the popular Arduino-compatible open-source software. In addition to Arduino-compatible features the Firstbot has two onboard DC motor EDGE PINS - SOLUTIONS CUBED, LLC CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Compare. Add To Cart. Quick View. CS004S: Dual In-Line Style Edge Pins with Solder (10) $3.00. Compare. Add To Cart. CS005 PICKIT PROGRAMMING AND DEBUG ADAPTOR KIT Product Description: This kit includes connectors and a PCB that can allow you to use a Microchip PICKit programmer/debugger with some of our open-source products. The CS005 allows you to program and debug the modules with custom/modified firmware. User datasheet

bill-of-materials

SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: MINIATURE ENGINEERING MODULES Miniature Engineering Modules – MEMKey SOLUTIONS CUBED 4 530-891-8045 OPERATION The MEMKey is a keypad encoder which can communicate via a serial interface or the standard AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

DUAL MOTOR QUAD SERVO CONTROLLER July 2013 Dual Motor Quad Servo Controller – BM011 User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACE CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

HARDWARE - SOLUTIONS CUBED, LLC Hardware - Solutions Cubed, LLC. Motor mounts, wheels, encoders, and more. Quick View. 12V 200RPM DC Motor (MOTOR1) $12.00. Compare. Add To Cart. Quick View. 300 CPR Encoder Kit (ENC300) BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACE CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

HARDWARE - SOLUTIONS CUBED, LLC Hardware - Solutions Cubed, LLC. Motor mounts, wheels, encoders, and more. Quick View. 12V 200RPM DC Motor (MOTOR1) $12.00. Compare. Add To Cart. Quick View. 300 CPR Encoder Kit (ENC300) BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

SOLUTIONS CUBED, ELECTRONIC ENGINEEERING, ROBOTICS, MOTION Contact us for engineering needs or questions about robots, robotics, motion control, motor control, or anything else electronic. Feel free to call, fax, or email us. We're waiting to hear from you! phone- 530-891-8045 (for sales, technical support, engineering services, or any other need) fax- 530-891-1643. address - Solutions Cubed, LLC 3045

MOTOR CONTROL

Motor controllers provide versatile interface options to speed your open loop motor control design efforts. Quick View. 6-24V 2A DC Motor Motion Controller (Synaptron Micro) $30.00. Compare. Add To Cart. Quick View. 6-24V 2A Dual DC Motor Controller (Motor Mind C) $37.00. SENSORS - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino FIRSTBOT ARDUINO COMPATIBLE ROBOT CONTROLLER The Firstbot robot controller is a versatile module for controlling robots and other electromechanical systems. The Firstbot includes Arduino-compatible hardware allowing you to program the system with the popular Arduino-compatible open-source software. In addition to Arduino-compatible features the Firstbot has two onboard DC motor SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: CS005 PICKIT PROGRAMMING AND DEBUG ADAPTOR KIT Product Description: This kit includes connectors and a PCB that can allow you to use a Microchip PICKit programmer/debugger with some of our open-source products. The CS005 allows you to program and debug the modules with custom/modified firmware. User datasheet

bill-of-materials

MINIATURE ENGINEERING MODULES Miniature Engineering Modules – MEMKey SOLUTIONS CUBED 4 530-891-8045 OPERATION The MEMKey is a keypad encoder which can communicate via a serial interface or the standard BM011 DUAL MOTOR AND QUAD SERVO CONTROLLER WITH SERIAL Product Description: This module can be used to control two small DC motors, generate pulses to control RC style servos, and read servo pulses from radio receivers. AN3192 APPLICATION NOTE AN3192 Electronic compass basics Doc ID 17353 Rev 1 7/34!- V Figure 3. Handheld device at tilted position Equation 2 Where, XM, YM, and ZM

are magnetic

DUAL MOTOR QUAD SERVO CONTROLLER July 2013 Dual Motor Quad Servo Controller – BM011 User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACESOLUTION CUBED CCIUCUBED SOLUTIONS MCIUSOLUTIONS CUBED LLCTWO CUBED SOLUTIONS CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

LIGHTING - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are EDGE PINS - SOLUTIONS CUBED, LLC CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Compare. Add To Cart. Quick View. CS004S: Dual In-Line Style Edge Pins with Solder (10) $3.00. Compare. Add To Cart. PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you FLASH MEMORY, 64MBITS, BM003 Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACESOLUTION CUBED CCIUCUBED SOLUTIONS MCIUSOLUTIONS CUBED LLCTWO CUBED SOLUTIONS CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

LIGHTING - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are EDGE PINS - SOLUTIONS CUBED, LLC CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Compare. Add To Cart. Quick View. CS004S: Dual In-Line Style Edge Pins with Solder (10) $3.00. Compare. Add To Cart. PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you FLASH MEMORY, 64MBITS, BM003 Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter ELECTRONIC ENGINEEERING, ROBOTICS, MOTION CONTROL, MOTOR That also happens to be the heart of good engineering. No matter the size of your company or design, we want to hear from you. Please contact us with your design needs and product ideas. Lon Glazner – Partner/Engineer. Solutions Cubed, LLC. lon@solutions-cubed.com. phone: 530-891-8045.

MOTOR CONTROL

Motor controllers provide versatile interface options to speed your open loop motor control design efforts. Quick View. 6-24V 2A DC Motor Motion Controller (Synaptron Micro) $30.00. Compare. Add To Cart. Quick View. 6-24V 2A Dual DC Motor Controller (Motor Mind C) $37.00. SENSORS - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino LIGHTING - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino KEYPAD/BUTTON INTERFACE Controllers for interfacing to keypads, buttons, keyboards. Quick View. MEMKEY Programming Kit (MEMKIT) $90.00. Compare. Add To Cart.

Quick View. Serial

PROTOCOL CONVERTERS

Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino USB TO SERIAL CONVERTER, BM010 Product Description. This breakout board carries a FTDI FT232R USB to serial converter. The module creates an easy to use USB to logic level serial port. It’s great for new designs or for upgrading legacy systems from serial ports to USB interfaces. Module documentation and application info are available to get you started right away. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: COLOR SENSOR TO RGB LED DRIVER WITH AN ARDUINO Color Sensor to RGB LED Driver with an Arduino. I’m in the process of adding the BM017 Color Sensor to our web site. This breakout module is based on the TCS34725 by AMS (formerly Taos). You can use it to detect red, green, blue, and clear color values from object in front of the sensor. I covered basic use of the sensor in my post Sensing SERIAL COMMUNICATION PROTOCOL Serial Communication Protocol - Revision 1.1 designservices@solutions-cubed.com phone - 530.891.8045 256 East First Street Chico, CA 95928 Contact SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACESOLUTION CUBED CCIUCUBED SOLUTIONS MCIUSOLUTIONS CUBED LLCTWO CUBED SOLUTIONS CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are EDGE PINS - SOLUTIONS CUBED, LLC CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Compare. Add To Cart. Quick View. CS004S: Dual In-Line Style Edge Pins with Solder (10) $3.00. Compare. Add To Cart. KEYPAD/BUTTON INTERFACE Controllers for interfacing to keypads, buttons, keyboards. Quick View. MEMKEY Programming Kit (MEMKIT) $90.00. Compare. Add To Cart.

Quick View. Serial

PROTOCOL CONVERTERS

Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter SOLUTIONS CUBED PRODUCTS AND SERVICESEDGE PINSLIGHTINGMOTOR CONTROLSENSORSPROTOCOL CONVERTERSKEYPAD/BUTTON INTERFACESOLUTION CUBED CCIUCUBED SOLUTIONS MCIUSOLUTIONS CUBED LLCTWO CUBED SOLUTIONS CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Add To Cart. Quick View. 6-24V 9A DC Motor Motion Controller (Motion Mind 3) $75.00. Add To Cart. Quick View. 6-24V 2A DC Motor Motion Controller

(Synaptron Micro)

BM019 SERIAL TO NFC CONVERTER The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to communicate with Near Field Communication enabled smart cards and EEPROM via 8N1 serial or SPI interfaces. The module carries a tuned PCB antenna for coupling to NFC enabled devices. Module documentation and application info are EDGE PINS - SOLUTIONS CUBED, LLC CS004: Dual In-Line Style Edge Pins without Solder (10) $2.25. Compare. Add To Cart. Quick View. CS004S: Dual In-Line Style Edge Pins with Solder (10) $3.00. Compare. Add To Cart. KEYPAD/BUTTON INTERFACE Controllers for interfacing to keypads, buttons, keyboards. Quick View. MEMKEY Programming Kit (MEMKIT) $90.00. Compare. Add To Cart.

Quick View. Serial

PROTOCOL CONVERTERS

Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino PID MOTOR CONTROL WITH AN ARDUINO PID motor control with an Arduino can be accomplished using simple firmware. In this example we use our Firstbot Arduino-Compatible controller to implement a PID based position controller using analog feedback and a potentiometer for control. This is similar in operation to a hobby servo, but the potentiometer provides the control signal instead of a pulse from a receiver (and of course you MOTOR 1 SPECIFICATION Motor1 Documentation Page 2 Solutions Cubed Motor1 - Solutions Cubed phone (530) 891-8045 - www.solutions-cubed.com 3. Mechanics Notes on mounting hardware: The motor has 4 mounting holes on its face (labeled

1-4 in the image

SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight forward exercise. The TCS34725 is an IC manufactured by AMS (previously Taos). It packages color sensing analog-to-digital converters for clear, red, green, and blue color sensing into a tiny 6

pin package.

DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 In order to import and debug an Arduino sketch you need to do the following. 1. Make sure the reset is disconnected from C5, in my case this is done by removing the jumper from the 2-pin header I installed. 2. Plug the Atmel-ICE 6-pin header over the 3x2 footprint marked ICSP. BM019 SERIAL TO NFC CONVERTER August 2013 BM019 Serial to NFC Converter User Datasheet Solutions Cubed, LLC | www.solutions-cubed.com designservices@solutions-cubed.com 1 BM019 Serial to NFC Converter ELECTRONIC DESIGN SERVICES Solutions Cubed is an electronic design company with 25 years of experience. Our embedded systems engineers are experienced with all manner of electronic product design and development. From electronics prototyping to printed circuit board design we can help get your

product to market.

ELECTRONIC ENGINEEERING, ROBOTICS, MOTION CONTROL, MOTOR That also happens to be the heart of good engineering. No matter the size of your company or design, we want to hear from you. Please contact us with your design needs and product ideas. Lon Glazner – Partner/Engineer. Solutions Cubed, LLC. lon@solutions-cubed.com. phone: 530-891-8045.

MOTOR CONTROL

Motor controllers provide versatile interface options to speed your open loop motor control design efforts. Quick View. 6-24V 2A DC Motor Motion Controller (Synaptron Micro) $30.00. Compare. Add To Cart. Quick View. 6-24V 2A Dual DC Motor Controller (Motor Mind C) $37.00. LIGHTING - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino SENSORS - SOLUTIONS CUBED, LLC Sensing Color With The Arduino and the TCS34725. Sensing color with the Arduino and the TCS34725 is a pretty straight forward Color Sensor to RGB LED Driver with an Arduino APPLICATION NOTES FOR ROBOTICS, MOTOR CONTROL, ARDUINO Application notes for Solutions Cubed, LLC products. Information to help you with your robotics, motor control, motion control, Arduino, and BASIC Stamp projects. BM001-H-Bridge Module(MC33926) An open source hardware module that carries a single H-bridge for DC motor control. 5-28VDC, up to 5A peak. User Data Sheet - Connectivity, electrical specifications, and other useful technical KEYPAD/BUTTON INTERFACE Controllers for interfacing to keypads, buttons, keyboards. Quick View. MEMKEY Programming Kit (MEMKIT) $90.00. Compare. Add To Cart.

Quick View. Serial

FIRSTBOT ARDUINO COMPATIBLE ROBOT CONTROLLER The Firstbot robot controller is a versatile module for controlling robots and other electromechanical systems. The Firstbot includes Arduino-compatible hardware allowing you to program the system with the popular Arduino-compatible open-source software. In addition to Arduino-compatible features the Firstbot has two onboard DC motor USB TO SERIAL CONVERTER, BM010 Product Description. This breakout board carries a FTDI FT232R USB to serial converter. The module creates an easy to use USB to logic level serial port. It’s great for new designs or for upgrading legacy systems from serial ports to USB interfaces. Module documentation and application info are available to get you started right away. SOLUTIONS CUBED IS AN INNOVATIVE ELECTRONIC DESIGN FIRM User Datasheet - Revision 1.1 designservices@solutions-cubed.com phone – 530.891.8045 256 East First Street Chico, CA 95928 Contact Solutions Cubed, LLC for your custom designs: Loading... Please wait...

*

530-891-8045

* Home

* Questions? Feedback?

powered by Olark

live chat software

* My Account

* Gift Certificates

*

Sign in or Create an

account

* View Cart

Search

ADVANCED SEARCH

| Search

Tips

CATEGORIES

* Edge Pins

* Lighting

* Motor Control

* Sensors

* Protocol Converters * Keypad/Button Interface

* Memory

* Power

* Hardware

*

MAKE YOUR MOVE

visit our blog!

*

*

more info

*

DESIGN SERVICES

prototype through production

get in touch

*

visit us on Facebook

*

MAKE YOUR MOVE

visit our blog!

*

* 1

* 2

* 3

* 4

* 5

* Previous

* Next

< >

FEATURED PRODUCTS

*

Quick View

6-24V 2A DC MOTOR MOTION CONTROLLER (SYNAPTRON MICRO)

_$30.00_

Add To Cart

*

Quick View

BM019: SERIAL TO NEAR FIELD COMMUNICATION (NFC)

_$16.00_

Add To Cart

*

Quick View

6-24V 9A DC MOTOR MOTION CONTROLLER (MOTION MIND 3)

_$75.00_

Add To Cart

*

Quick View

BM010: USB TO SERIAL DATA CONVERTER

_$15.00_

Add To Cart

CATEGORIES

* Edge Pins

* Lighting

* Motor Control

* Sensors

* Protocol Converters * Keypad/Button Interface

* Memory

* Power

* Hardware

RECENT UPDATES

* SENSING COLOR WITH THE ARDUINO AND THE TCS34725 Sensing color with the Arduino and the TCS34725 is a pretty straight

forward …

* COLOR SENSOR TO RGB LED DRIVER WITH AN ARDUINO I’m in the process of adding the BM017 Color Sensor to our web site.

This …

* DEBUGGING ARDUINO SKETCHES WITH ATMEL STUDIO 7 Atmel’s Studio 7 (Atmel is now owned by Microchip) allows you to

import …

Connect with us: Facebook

Twitter

* Home

* Distributors »

* Make Your Move - Blog » * App Notes - Downloads - Datasheets »

* Contact Us »

* Circuit Design and Electronic Engineering Services » * Electronic Design Blog » * Shipping & Returns »

* About Us »

* Returns-Privacy-Terms & Conditions » All prices are in USD Copyright 2020 Solutions Cubed, LLC. Sitemap

|

Questions? Feedback?

powered by Olark

live chat software

Envelope Iconsmall picture of an envelope signifying email

0

Contact us!

Contact us!

Arrow Downa small down arrow to minimize chat box We're not around, but we'd love to chat another time. and type your NameRequired Asterisksignifies that this field can not be left blank and type your EmailRequired Asterisksignifies that this field can not be left blank We're not around but we still want to hear from you! Leave us a note:Required Asterisksignifies that this field can not be left

blankSend

Powered by Olark