SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

EMISSION MEASUREMENT Emissions measurement made easy. Gas sensors for emissions measurement from smartGAS work according to the principle of non-dispersive infrared measurement technology (NDIR). They reliably and precisely measure the concentration of CO, CO 2, SO 2 and hydrocarbons such as CH 4 in the flue gas. You, as the user, benefit from the use of

sensors

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS CO 2 sensors of the FLOW EVO series from smartGAS can detect carbon dioxide in many different concentrations. They are available with measuring ranges from 0 – 2,000 ppm, 0 – 5,000 ppm and 0 – 10,000 ppm. In the percentage by volume range our CO 2 sensors measure gas concentrations of 5, 10, 20, 30, 50 and 100 Vol%.

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

EVO SMARTMODUL BASIC smartGAS Mikrosensorik GmbH |Huenderstr. 1 | 74080 Heilbronn | Germany Edition 02/08_2017 phone: +49 7131/797553-0 | fax: +49 7131/797553-10 | www.smartgas.eu|mail@smartgas.eu smartMODUL BASIC EVO Infrared gas sensor SF6 // SULFUR HEXAFLUORIDE // 1000 ppm

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021 SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

EMISSION MEASUREMENT Emissions measurement made easy. Gas sensors for emissions measurement from smartGAS work according to the principle of non-dispersive infrared measurement technology (NDIR). They reliably and precisely measure the concentration of CO, CO 2, SO 2 and hydrocarbons such as CH 4 in the flue gas. You, as the user, benefit from the use of

sensors

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS CO 2 sensors of the FLOW EVO series from smartGAS can detect carbon dioxide in many different concentrations. They are available with measuring ranges from 0 – 2,000 ppm, 0 – 5,000 ppm and 0 – 10,000 ppm. In the percentage by volume range our CO 2 sensors measure gas concentrations of 5, 10, 20, 30, 50 and 100 Vol%.

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

EVO SMARTMODUL BASIC smartGAS Mikrosensorik GmbH |Huenderstr. 1 | 74080 Heilbronn | Germany Edition 02/08_2017 phone: +49 7131/797553-0 | fax: +49 7131/797553-10 | www.smartgas.eu|mail@smartgas.eu smartMODUL BASIC EVO Infrared gas sensor SF6 // SULFUR HEXAFLUORIDE // 1000 ppm

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021 SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". APPLICATIONS OF OUR GAS SENSORS Applications for NDIR gas sensors from smartGAS Gas sensors for the widest range of applications. Our high-performance gas sensors are based on the principle of non-dispersive infrared measuring technology (NDIR) and offer numerous advantages over conventional sensors.. We exclusively use proven and reliable materials and high-quality optical components for our NDIR sensors in line with the BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a TEST GASES | SMARTGAS smartGAS test gases - always the right mix. In many applications, the norms and directives require the regular inspection of sensors on-site with regard to their measurement function. The correct gas mix for the sensors is required in these cases to achieve a conclusive inspection result. smartGAS also offers the right solutions and test gases. CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS CO 2 sensors of the FLOW EVO series from smartGAS can detect carbon dioxide in many different concentrations. They are available with measuring ranges from 0 – 2,000 ppm, 0 – 5,000 ppm and 0 – 10,000 ppm. In the percentage by volume range our CO 2 sensors measure gas concentrations of 5, 10, 20, 30, 50 and 100 Vol%. EMISSION MEASUREMENT Emissions measurement made easy. Gas sensors for emissions measurement from smartGAS work according to the principle of non-dispersive infrared measurement technology (NDIR). They reliably and precisely measure the concentration of CO, CO 2, SO 2 and hydrocarbons such as CH 4 in the flue gas. You, as the user, benefit from the use of

sensors

REFRIGERANT SENSORS

Refrigerant sensors from smartGAS operate on the basis of non-dispersive infrared absorption to detect target gases reliably in measuring ranges from 0 to 1000 ppm or 0 to 2000 ppm. The refrigerant sensors have no wear parts and require no chemical reactions, resulting in a very long service life. They are designed for fast and

easy mounting

CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%. SILAREX | CUSTOMIZED SENSOR PLATFORM | SMARTGAS smartGAS SILAREX for demanding, customer-specific developments • Individual systems for high-precision systems • Combined measuring

possibilities

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter. SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". MULTI GAS ANALYZERS AND CUSTOMER SOLUTIONS The ANAREX product family impresses with its highly accurate and stable measurement performance as well as its customer-friendly interfacing via touchscreen and simple sensor calibration. The ANAREX is designed as a multi-gas analyzer and is suitable for installation in a 19" rack. Multigas analyzer. Highly stable measurement

performance.

FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a EMISSION MEASUREMENT Emissions measurement made easy. Gas sensors for emissions measurement from smartGAS work according to the principle of non-dispersive infrared measurement technology (NDIR). They reliably and precisely measure the concentration of CO, CO 2, SO 2 and hydrocarbons such as CH 4 in the flue gas. You, as the user, benefit from the use of

sensors

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

REFRIGERANT SENSORS

Refrigerant sensors from smartGAS operate on the basis of non-dispersive infrared absorption to detect target gases reliably in measuring ranges from 0 to 1000 ppm or 0 to 2000 ppm. The refrigerant sensors have no wear parts and require no chemical reactions, resulting in a very long service life. They are designed for fast and

easy mounting

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". MULTI GAS ANALYZERS AND CUSTOMER SOLUTIONS The ANAREX product family impresses with its highly accurate and stable measurement performance as well as its customer-friendly interfacing via touchscreen and simple sensor calibration. The ANAREX is designed as a multi-gas analyzer and is suitable for installation in a 19" rack. Multigas analyzer. Highly stable measurement

performance.

FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a EMISSION MEASUREMENT Emissions measurement made easy. Gas sensors for emissions measurement from smartGAS work according to the principle of non-dispersive infrared measurement technology (NDIR). They reliably and precisely measure the concentration of CO, CO 2, SO 2 and hydrocarbons such as CH 4 in the flue gas. You, as the user, benefit from the use of

sensors

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

REFRIGERANT SENSORS

Refrigerant sensors from smartGAS operate on the basis of non-dispersive infrared absorption to detect target gases reliably in measuring ranges from 0 to 1000 ppm or 0 to 2000 ppm. The refrigerant sensors have no wear parts and require no chemical reactions, resulting in a very long service life. They are designed for fast and

easy mounting

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". MULTI GAS ANALYZERS AND CUSTOMER SOLUTIONS The ANAREX product family impresses with its highly accurate and stable measurement performance as well as its customer-friendly interfacing via touchscreen and simple sensor calibration. The ANAREX is designed as a multi-gas analyzer and is suitable for installation in a 19" rack. Multigas analyzer. Highly stable measurement

performance.

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a

REFRIGERANT SENSORS

Refrigerant sensors from smartGAS operate on the basis of non-dispersive infrared absorption to detect target gases reliably in measuring ranges from 0 to 1000 ppm or 0 to 2000 ppm. The refrigerant sensors have no wear parts and require no chemical reactions, resulting in a very long service life. They are designed for fast and

easy mounting

CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS CO 2 sensors of the FLOW EVO series from smartGAS can detect carbon dioxide in many different concentrations. They are available with measuring ranges from 0 – 2,000 ppm, 0 – 5,000 ppm and 0 – 10,000 ppm. In the percentage by volume range our CO 2 sensors measure gas concentrations of 5, 10, 20, 30, 50 and 100 Vol%.

SAFETY TECHNOLOGY

With the BASIC EVO range, smartGAS offers you long-lasting and low-maintenance NDIR sensors for installation in an extremely wide variety of gas detectors and gas warning devices. Our gas sensors are suitable for the detection of the smallest quantities of gas in the ambient air. This way you can detect unusual concentrations early on

and can

SILAREX | CUSTOMIZED SENSOR PLATFORM | SMARTGAS smartGAS SILAREX for demanding, customer-specific developments • Individual systems for high-precision systems • Combined measuring

possibilities

CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS With the smartGAS Calibration Tool, all sensors of the EVO series F3 and B3 can be read out and calibrated quickly and easily, both individually and in combination with the

SF6 SENSORS

SF 6 sensors for gas-insulated switchgears (GIS) . The main area of application for the non-flammable gas sulphur hexafluoride (SF 6) is insulation of electrical high-voltage switchgears, transformers and cables.Although sulphur hexafluoride is non-toxic and non-flammable, its global warming potential is about 24,000 times higher than carbon dioxide (GWP=23,900). CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS The composition of the air in buildings is very important for the health and well-being of the people who inhabit them. The Air Quality Regulation (DIN EN 1946-2) therefore defines a CO 2 threshold value of 1,500 ppm in closed rooms. With CO 2 sensors from smartGAS you ensure that the CO 2 concentration of the room air is always in the “green zone”. ”. The sensors measure not only the CO FLOW EVO-SENSORS FOR PROCESS CONTROL NDIR sensors from smartGAS offer many advantages for successful process measurement and are therefore ideal for use in process control. They have a large spectrum of measurable gases and are especially convincing where it is important to have the utmost precision and reliability. EMISSION MEASUREMENT smartGAS offers a series of high-precision gas sensors for emissions measurement that offer a variety of advantages over conventional measurement processes due to special physical measurement technology.

C2H4 SENSORS

C 2 H 4 sensors for detecting ethylene . The precise measurement of C 2 H 4 is essential for ensuring the quality of fruits or the safety of electrical systems. When used as a ripening gas for example ethylene promotes ripening of certain types of fruits and simultaneously serves as an indicator for the declining effectiveness of transformer oils.

SO2F2 SENSORS

SO 2 F 2 sensors from smartGAS for detecting sulphuryl fluoride . Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal pests.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS With the smartGAS Calibration Tool, all sensors of the EVO series F3 and B3 can be read out and calibrated quickly and easily, both individually and in combination with the

SF6 SENSORS

SF 6 sensors for gas-insulated switchgears (GIS) . The main area of application for the non-flammable gas sulphur hexafluoride (SF 6) is insulation of electrical high-voltage switchgears, transformers and cables.Although sulphur hexafluoride is non-toxic and non-flammable, its global warming potential is about 24,000 times higher than carbon dioxide (GWP=23,900). CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS The composition of the air in buildings is very important for the health and well-being of the people who inhabit them. The Air Quality Regulation (DIN EN 1946-2) therefore defines a CO 2 threshold value of 1,500 ppm in closed rooms. With CO 2 sensors from smartGAS you ensure that the CO 2 concentration of the room air is always in the “green zone”. ”. The sensors measure not only the CO FLOW EVO-SENSORS FOR PROCESS CONTROL NDIR sensors from smartGAS offer many advantages for successful process measurement and are therefore ideal for use in process control. They have a large spectrum of measurable gases and are especially convincing where it is important to have the utmost precision and reliability. EMISSION MEASUREMENT smartGAS offers a series of high-precision gas sensors for emissions measurement that offer a variety of advantages over conventional measurement processes due to special physical measurement technology.

C2H4 SENSORS

C 2 H 4 sensors for detecting ethylene . The precise measurement of C 2 H 4 is essential for ensuring the quality of fruits or the safety of electrical systems. When used as a ripening gas for example ethylene promotes ripening of certain types of fruits and simultaneously serves as an indicator for the declining effectiveness of transformer oils.

SO2F2 SENSORS

SO 2 F 2 sensors from smartGAS for detecting sulphuryl fluoride . Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal pests.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS With the smartGAS Calibration Tool, all sensors of the EVO series F3 and B3 can be read out and calibrated quickly and easily, both individually and in combination with the APPLICATIONS OF OUR GAS SENSORS Applications for NDIR gas sensors from smartGAS Gas sensors for the widest range of applications. Our high-performance gas sensors are based on the principle of non-dispersive infrared measuring technology (NDIR) and offer numerous advantages over conventional sensors.. We exclusively use proven and reliable materials and high-quality optical components for our NDIR sensors in line with the BASIC EVO | DIFUSSION SENSORS | SMARTGAS Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a fast response time and low maintenance costs. CO2 SENSOR | DETECT CARBON DIOXIDE | SMARTGAS The composition of the air in buildings is very important for the health and well-being of the people who inhabit them. The Air Quality Regulation (DIN EN 1946-2) therefore defines a CO 2 threshold value of 1,500 ppm in closed rooms. With CO 2 sensors from smartGAS you ensure that the CO 2 concentration of the room air is always in the “green zone”. ”. The sensors measure not only the CO EMISSION MEASUREMENT smartGAS offers a series of high-precision gas sensors for emissions measurement that offer a variety of advantages over conventional measurement processes due to special physical measurement technology. CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors from smartGAS guarantee high-quality products Carbon monoxide can be found in numerous industrial processes: It is produced for example as a by-product in cement production or as a synthesis gas during wood gasification. TEST GASES | SMARTGAS R134a 1000 ppm 2000 ppm. R125 1000 ppm 2000 ppm. R123 1000 ppm 2000 ppm. R410a 1000 ppm 2000 ppm

REFRIGERANT SENSORS

Refrigerant sensors from smartGAS reduce operating costs and protect the environment Refrigeration and air conditioning systems are used in many areas: in supermarkets and industrial enterprises (commercial refrigeration), as well as hotels, office buildings and large refrigerated warehouses. SILAREX | CUSTOMIZED SENSOR PLATFORM | SMARTGAS smartGAS SILAREX for demanding, customer-specific developments • Individual systems for high-precision systems • Combined measuring

possibilities

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021 SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm APPLICATIONS OF OUR GAS SENSORS Applications for NDIR gas sensors from smartGAS Gas sensors for the widest range of applications. Our high-performance gas sensors are based on the principle of non-dispersive infrared measuring technology (NDIR) and offer numerous advantages over conventional sensors.. We exclusively use proven and reliable materials and high-quality optical components for our NDIR sensors in line with the GASES | MEASUREMENT SPECTRUM OF OUR GAS SENSORS | SMARTGAS Sensors from smartGAS detect a wide range of different gases and can therefore be used in many different ways. BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a TEST GASES | SMARTGAS smartGAS test gases - always the right mix. In many applications, the norms and directives require the regular inspection of sensors on-site with regard to their measurement function. The correct gas mix for the sensors is required in these cases to achieve a conclusive inspection result. smartGAS also offers the right solutions and test gases.

ACCESSORIES

smartGAS Accessories • Connect Interface • ModulBOX • Test gases. Test gases. Inspection of sensors on-site with regard to their measurement function CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter. SILAREX | CUSTOMIZED SENSOR PLATFORM | SMARTGAS smartGAS SILAREX for demanding, customer-specific developments • Individual systems for high-precision systems • Combined measuring

possibilities

FOOD STORAGE

Checking the ripening process - CO 2 and ethylene sensors. Ethylene sensors are used everywhere where fruit has to be transported and stored. Ethylene (C 2 H 4) is given off into the ambient air by almost all fruits and contributes substantially to fruit ripening when present in the right concentration. Ethylene sensors and CO 2 sensors from smartGAS help you in the monitoring and efficient

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021 SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm SMARTGAS MIKROSENSORIK The new smartGAS Calibration Tool is available: From now on the software offers even more features and can be used directly. The tool is now available free of charge without a license key for a period of time directly after downloading. SOFTWARE | OUR CALLIBRATION TOOL | SMARTGAS Download smartGAS Calibration Tool. Here you can easily download the smartGAS software. 1. Download the smartGAS Calibration Software and install it on your PC or Laptop. 2. Ask for your free personal license key under this LINK. 3. Enter your 25 digit license key in your smartGAS Calibration Software under "Product Activation". FLOW EVO-SENSORS FOR PROCESS CONTROL Using the smartGAS USB adapter (item no.: Z6-000025 or Z6-000026), the sensor can be easily connected and read out through to a PC or notebook. In addition to calibrating the zero and end point, the response time t90 or the Modbus address can be set and a test report on the sensor's status can be generated. Download the cost free

Calibration Tool.

SF6 SENSORS

SF6 gas sensors for every application. With the SF 6 sensors of the FLOW EVO series with measuring ranges of 100 Vol.-%, 2000 ppm, 1000 ppm and 50 ppm smartGAS offers technologies for monitoring SF 6 gas quality, SF 6 monitoring of room air and SF 6 leak detection. The NDIR based Flow EVO SF 6 sensor (100 Vol.-%) precisely measure the purity

or

BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

C2H4 SENSORS

Wherever ethylene is to be found, the concentration of the gas plays an important role. The C 2 H 4 gas sensors of the FLOW EVO series from smartGAS safely and reliably detect the presence of ethylene in a measuring range from 0 to 2000 ppm. The sensors operate based on the principle of the non-dispersive infrared absorption of gases (NDIR

SO2F2 SENSORS

sensors from smartGAS for detecting sulphuryl fluoride. Sulphuryl fluoride (SO 2 F 2) is a colourless and odourless, non-flammable gas, which was originally developed as a fumigation agent for the treatment of packaging wood and wooden pallets, as well as for general treatment of deciduous and coniferous trees to protect them against animal

pests.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter.

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huende rstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602105-05000_SF6 1000ppm APPLICATIONS OF OUR GAS SENSORS Applications for NDIR gas sensors from smartGAS Gas sensors for the widest range of applications. Our high-performance gas sensors are based on the principle of non-dispersive infrared measuring technology (NDIR) and offer numerous advantages over conventional sensors.. We exclusively use proven and reliable materials and high-quality optical components for our NDIR sensors in line with the GASES | MEASUREMENT SPECTRUM OF OUR GAS SENSORS | SMARTGAS Sensors from smartGAS detect a wide range of different gases and can therefore be used in many different ways. BASIC EVO | DIFUSSION SENSORS | SMARTGAS BASIC. - Sensors for diffusion applications. Diffusion sensors for ambient air monitoring are available from smartGAS as the BASIC EVO series. Just like all smartGAS-sensors are distinguished by low detection limits, very slight drift, a large temperature range, a TEST GASES | SMARTGAS smartGAS test gases - always the right mix. In many applications, the norms and directives require the regular inspection of sensors on-site with regard to their measurement function. The correct gas mix for the sensors is required in these cases to achieve a conclusive inspection result. smartGAS also offers the right solutions and test gases.

ACCESSORIES

smartGAS Accessories • Connect Interface • ModulBOX • Test gases. Test gases. Inspection of sensors on-site with regard to their measurement function CO-SENSOR | CARBON MONOXIDE CONCENTRATION | SMARTGAS CO sensors of the FLOW EVO series from smartGAS are ideal for this task: They operate on the basis of non-dispersive infrared (NDIR) absorption and therefore detect even minuscule carbon monoxide concentrations. The sensors are available for measuring ranges from 0 to 2000 ppm, 0 to 5000 ppm and 2, 10, 20, 50 and 100 Vol%.

TRANSMITTER EVO

With the TRANSMITTER EVO, we offer the option of adapting the front foil to suit the customer's design and adjusting the device to his application in the best possible way, using installed sensors from the BASIC EVO -series. This means that the customer receives "his device" - without compromises! "Ready to use" gas transmitter. SILAREX | CUSTOMIZED SENSOR PLATFORM | SMARTGAS smartGAS SILAREX for demanding, customer-specific developments • Individual systems for high-precision systems • Combined measuring

possibilities

FOOD STORAGE

Checking the ripening process - CO 2 and ethylene sensors. Ethylene sensors are used everywhere where fruit has to be transported and stored. Ethylene (C 2 H 4) is given off into the ambient air by almost all fruits and contributes substantially to fruit ripening when present in the right concentration. Ethylene sensors and CO 2 sensors from smartGAS help you in the monitoring and efficient

MADE IN GERMANY

smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I sales@smartgas.eu I www.smartgas.eu DS_F3_602108-05000_SF6 100Vol.-% Edition 06_04/2021

Cookies akzeptieren

Diese Website verwendet Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu. Weitere Informationen.

__ __

* Deutsch

* English

__

__

Toggle navigation__

* Unternehmen __

*

* Über smartGAS

*

* Karriere

* Produkte __

*

* Unsere Produkte

*

* BASIC EVO

*

* FLOW EVO

*

* TRANSMITTER EVO

*

* SILAREX

*

* Software

*

* Zubehör

* Gase __

*

* Gase

*

* C2H4-Sensoren

*

* HC-Sensoren

*

* Biogas-Sensoren

*

* CH3Br

*

* CO

*

* CO2

*

* Kältemittel-Sensoren

*

* SF6

*

* SO2

*

* SO2F2

* Anwendungen __

*

* Anwendungsbereiche

*

* Prozessmesstechnik

*

* Kältemittel

*

* Hochspannung SF6

*

* Fruchtlager

*

* Emissionsmessung

*

* Sicherheitstechnik

*

* Lüftungstechnik

*

* Schädlingsbekämpfung

*

* Biogas

* Aktuelles __

*

* News

*

* Newsletter

*

* Messen

* Vertriebspartner

* Kontakt

__

PRODUKTE

__

ANWENDUNGEN

__

AKTUELLES

__

VERTRIEBSPARTNER

Kontakt

aufnehmen

__

GASANALYSE AUF DIE SMARTE ART SIE SUCHEN EINEN HOCHPRÄZISEN, LANGLEBIGEN SENSOR, DER ZUVERLÄSSIG

GASE MESSEN KANN?

Einen Sensor, der sich optimal für Ihre Anwendung eignet? Dann sind die NDIR-Gassensoren von smartGAS die richtige Wahl: Sie enthalten hochwertige optische Komponenten, die eine gute Selektivität, eine geringe Drift und sehr kurze Ansprechzeiten ermöglichen. Darüber hinaus bieten unsere Gassensoren viele weitere Vorteile gegenüber herkömmlichen Messsystemen. Informieren Sie sich jetzt über die herausragenden Funktionen unserer Gassensoren.

BASICEVO

Sensoren für

Diffusionsanwendungen

FLOWEVO

Sensoren für

Analyseanwendungen

SILAREX

Sonderlösungen

TRANSMITTEREVO

Die OEM Kundenlösung

von smartGAS

ZUBEHÖR

Sensoren für

Analyseanwendungen

SOFTWARE

Sensorinformationen sowie Betriebszustände auslesen FACHMESSEN UND EVENTS WELTWEIT  -  IHRE ANWENDUNG PERSÖNLICH BESPRECHEN UND GEMEINSAM DIE BESTE LÖSUNG FINDEN! VSK 2020 - 04.-07.02.2020 AHR Expo - 03.-05.02.2020 SENSOR + TEST - 25.06. - 27.06.2019

AKTUELLES

SMARTGAS-WEBNEWS „EMISSIONSMESSUNG“

21. Oktober 2019

Immer strengere Umweltschutzauflagen und steigende Brennstoffpreise zwingen Unternehmen dazu, ihre Verbrennungsanlagen so schadstoffarm wie möglich zu betreiben. Die Gassensoren zur Emissionsmessung

von smartGAS

unterstützen sie dabei optimal, denn sie detektieren selbst geringste Konzentrationen der Gase CO, CO2, SO2 sowie von Kohlenwasserstoffen wie z. B. CH4. Anlagenbetreiber profitieren durch geringere laufende Kosten und einen deutlich effizienteren Betrieb.

... mehr lesen

AMA SEMINAR "GASMESSTECHNIK II"

19. August 2019

Unter der wissenschaftlichen Leitung von Prof. Dr. Jürgen Wöllenstein vom Fraunhofer IPM in Freiburg findet in Karlsruhe am 18.09.2019 wieder das Seminar „Gasmesstechnik II

“

statt.

mehr lesen

smartGAS Mikrosensorik GmbH

Hünderstr. 1

74080 Heilbronn

Tel: + 49 (0) 7131 / 797553 - 0 Fax: +49 (0) 7131 / 797553 - 10 E-Mail: mail(at)smartgas.eu

QUICKLINKS

* Unternehmen

* Produkte

* Anwendungen

* Aktuelles

* Vertriebspartner

* Kontakt

INFORMATIONEN

* Impressum

* Datenschutz

* AVB/AEB

DOWNLOAD ISO 9001... Wir bieten Ihnen ausschließlich EU-Markenqualität. Copyright © 2020 smartGAS Mikrosensorik GmbH

* __

* __

__