SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT3 – SHARKRF openSPOT3. • • • • • • • • •. The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. The openSPOT3 is now available

in our

OPENSPOT2 – SHARKRF Key features. Web-based easy and fast Quick Setup. No additional hardware required, works out of the box without a computer. All accessories included you need to have the openSPOT2 up and running (USB-C cable, 120V/230V USB power supply) Built-in Wi-Fi and radio antenna. Designed for 24/7 continuous use even in your vehicle with

extreme fast

OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54 . It's updated with new information when a new stable firmware is released. The PDF version is available here, however we recommend using the online manual, as it gets updated when a new stable firmware is released. Company names and products in this manual

are

OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at FIRST STEPS · GITBOOK Set some basic settings like the frequency, and select the network you want to connect (this will set which connector will be used) Select the server to connect, set the needed network parameters (like your callsign, IDs, etc.), and click on the Connect button. After the openSPOT3 is connected to the selected server it is ready to use with

your

OPENSPOT2 USER MANUAL · GITBOOK The openSPOT2 package contains an AC/USB power supply and a USB cable . These are all you need to operate the openSPOT2, however, you will need a web browser on a computer, tablet or mobile phone for setting up the openSPOT2 through it's web interface, but after that, the device can work standalone. Please only use the supplied AC/USB power CROSS MODEM MODES · GITBOOK Cross modem modes. The openSPOT2 supports the following cross modes: You can use your DMR transceiver to access C4FM and NXDN networks; You can use your C4FM transceiver to access DMR, NXDN and P25 networks; You can use your NXDN transceiver to access DMR and C4FM networks; You can use your P25 transceiver to access C4FM networks; Note that cross

mode using a D-STAR

SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT3 – SHARKRF openSPOT3. • • • • • • • • •. The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. The openSPOT3 is now available

in our

OPENSPOT2 – SHARKRF Key features. Web-based easy and fast Quick Setup. No additional hardware required, works out of the box without a computer. All accessories included you need to have the openSPOT2 up and running (USB-C cable, 120V/230V USB power supply) Built-in Wi-Fi and radio antenna. Designed for 24/7 continuous use even in your vehicle with

extreme fast

OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54 . It's updated with new information when a new stable firmware is released. The PDF version is available here, however we recommend using the online manual, as it gets updated when a new stable firmware is released. Company names and products in this manual

are

OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at FIRST STEPS · GITBOOK Set some basic settings like the frequency, and select the network you want to connect (this will set which connector will be used) Select the server to connect, set the needed network parameters (like your callsign, IDs, etc.), and click on the Connect button. After the openSPOT3 is connected to the selected server it is ready to use with

your

OPENSPOT2 USER MANUAL · GITBOOK The openSPOT2 package contains an AC/USB power supply and a USB cable . These are all you need to operate the openSPOT2, however, you will need a web browser on a computer, tablet or mobile phone for setting up the openSPOT2 through it's web interface, but after that, the device can work standalone. Please only use the supplied AC/USB power CROSS MODEM MODES · GITBOOK Cross modem modes. The openSPOT2 supports the following cross modes: You can use your DMR transceiver to access C4FM and NXDN networks; You can use your C4FM transceiver to access DMR, NXDN and P25 networks; You can use your NXDN transceiver to access DMR and C4FM networks; You can use your P25 transceiver to access C4FM networks; Note that cross

mode using a D-STAR

SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT FIRMWARE FILES Changelog for SharkRF openSPOT firmware versions. 0142: - Add support for FCS servers which have IDs larger than 9. 0141: - Fix source UDP port of DHCP packets. OPENING THE WEB INTERFACE · GITBOOK You can use SharkRF Link to easily open the web interface of the openSPOT2. Enter the device UID (you can find this ID on the sticker at the bottom of the openSPOT2 FIRST STEPS · GITBOOK Here are the steps described in detail: Powering up. Power up the openSPOT2 by plugging the supplied USB-C cable into the USB-C port. The openSPOT2 is designed to boot very YSFREFLECTOR · GITBOOK Switching to NXDNReflector servers this way changes the openSPOT3's active connector to the NXDNReflector connector. You can switch the cross mode DGID sent to the network using a D-STAR® transceiver by entering DTMF code # followed by the desired DGID. For example, if you want to set the cross mode DGID to 25, enter DTMF #25. TROUBLESHOOTING · GITBOOK If pressing and holding the power button for 1-2 seconds does not turn on the device, then press and hold the power button for at least 7 seconds to do a hard reboot. If the power LED is blinking 3 times, then the devices turns immediately turns off, then the battery is overheated, and it's protection is active. OPENSPOT3 AUTOMATIC WIFI TRANSFER Re: OpenSpot3 Automatic WIFI transfer. - Make sure you have enabled 2.4GHz Wi-Fi, not just 5GHz. - Place the openSPOT3 close to the Wi-Fi router. - If it still does not work, try switching Wi-Fi channel on

your Wi-Fi router.

SET UP YAESU FT3D AND OPENSPOT3 Re: Set up Yaesu Ft3d and Openspot3. You can connect to the TGIF network if you select DMRplus/MARC/TGIF/XLX as the server type, and then select the server for the TGIF network in the server dropdown list. In Quick setup, I select C4FM, then DMRplus/MARC/TGIF/XLX, then TGIF in drop down box and enter 550 in talk group. OPENSPOT 3 TO IPHONE Go to the Network page, Wireless settings section on the OS3 web interface. Make sure Advanced mode is turned on (there's a checkbox for that at the bottom right of the web interface). Set your home Wi-Fi as SSID #1 (and key) and your phone's Wi-Fi as SSID #2 (and key). If your home Wi-Fi (SSID #1) is not reachable then the openSPOT3

will

DMR USER BLOCKED

Re: DMR User Blocked. This blocked message is sent by the BrandMeister Network, not the openSPOT2. The server blocks you if you key too many times over a short time period, and the block is usually lifted after 15 minutes or so. If you are still blocked, please contact their support at https://ask.brandmeister.network/. SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT3 – SHARKRF openSPOT3. • • • • • • • • •. The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. The openSPOT3 is now available

in our

OPENSPOT2 – SHARKRF Key features. Web-based easy and fast Quick Setup. No additional hardware required, works out of the box without a computer. All accessories included you need to have the openSPOT2 up and running (USB-C cable, 120V/230V USB power supply) Built-in Wi-Fi and radio antenna. Designed for 24/7 continuous use even in your vehicle with

extreme fast

OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54 . It's updated with new information when a new stable firmware is released. The PDF version is available here, however we recommend using the online manual, as it gets updated when a new stable firmware is released. Company names and products in this manual

are

OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at FIRST STEPS · GITBOOK Set some basic settings like the frequency, and select the network you want to connect (this will set which connector will be used) Select the server to connect, set the needed network parameters (like your callsign, IDs, etc.), and click on the Connect button. After the openSPOT3 is connected to the selected server it is ready to use with

your

OPENSPOT2 USER MANUAL · GITBOOK The openSPOT2 package contains an AC/USB power supply and a USB cable . These are all you need to operate the openSPOT2, however, you will need a web browser on a computer, tablet or mobile phone for setting up the openSPOT2 through it's web interface, but after that, the device can work standalone. Please only use the supplied AC/USB power CROSS MODEM MODES · GITBOOK Cross modem modes. The openSPOT2 supports the following cross modes: You can use your DMR transceiver to access C4FM and NXDN networks; You can use your C4FM transceiver to access DMR, NXDN and P25 networks; You can use your NXDN transceiver to access DMR and C4FM networks; You can use your P25 transceiver to access C4FM networks; Note that cross

mode using a D-STAR

SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT3 – SHARKRF openSPOT3. • • • • • • • • •. The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. The openSPOT3 is now available

in our

OPENSPOT2 – SHARKRF Key features. Web-based easy and fast Quick Setup. No additional hardware required, works out of the box without a computer. All accessories included you need to have the openSPOT2 up and running (USB-C cable, 120V/230V USB power supply) Built-in Wi-Fi and radio antenna. Designed for 24/7 continuous use even in your vehicle with

extreme fast

OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54 . It's updated with new information when a new stable firmware is released. The PDF version is available here, however we recommend using the online manual, as it gets updated when a new stable firmware is released. Company names and products in this manual

are

OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at FIRST STEPS · GITBOOK Set some basic settings like the frequency, and select the network you want to connect (this will set which connector will be used) Select the server to connect, set the needed network parameters (like your callsign, IDs, etc.), and click on the Connect button. After the openSPOT3 is connected to the selected server it is ready to use with

your

OPENSPOT2 USER MANUAL · GITBOOK The openSPOT2 package contains an AC/USB power supply and a USB cable . These are all you need to operate the openSPOT2, however, you will need a web browser on a computer, tablet or mobile phone for setting up the openSPOT2 through it's web interface, but after that, the device can work standalone. Please only use the supplied AC/USB power CROSS MODEM MODES · GITBOOK Cross modem modes. The openSPOT2 supports the following cross modes: You can use your DMR transceiver to access C4FM and NXDN networks; You can use your C4FM transceiver to access DMR, NXDN and P25 networks; You can use your NXDN transceiver to access DMR and C4FM networks; You can use your P25 transceiver to access C4FM networks; Note that cross

mode using a D-STAR

SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENT Introducing the openSPOT3. Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! March 21, 2020

13:20.

OPENSPOT FIRMWARE FILES Changelog for SharkRF openSPOT firmware versions. 0142: - Add support for FCS servers which have IDs larger than 9. 0141: - Fix source UDP port of DHCP packets. OPENING THE WEB INTERFACE · GITBOOK You can use SharkRF Link to easily open the web interface of the openSPOT2. Enter the device UID (you can find this ID on the sticker at the bottom of the openSPOT2 FIRST STEPS · GITBOOK Here are the steps described in detail: Powering up. Power up the openSPOT2 by plugging the supplied USB-C cable into the USB-C port. The openSPOT2 is designed to boot very YSFREFLECTOR · GITBOOK Switching to NXDNReflector servers this way changes the openSPOT3's active connector to the NXDNReflector connector. You can switch the cross mode DGID sent to the network using a D-STAR® transceiver by entering DTMF code # followed by the desired DGID. For example, if you want to set the cross mode DGID to 25, enter DTMF #25. TROUBLESHOOTING · GITBOOK If pressing and holding the power button for 1-2 seconds does not turn on the device, then press and hold the power button for at least 7 seconds to do a hard reboot. If the power LED is blinking 3 times, then the devices turns immediately turns off, then the battery is overheated, and it's protection is active. OPENSPOT3 AUTOMATIC WIFI TRANSFER Re: OpenSpot3 Automatic WIFI transfer. - Make sure you have enabled 2.4GHz Wi-Fi, not just 5GHz. - Place the openSPOT3 close to the Wi-Fi router. - If it still does not work, try switching Wi-Fi channel on

your Wi-Fi router.

SET UP YAESU FT3D AND OPENSPOT3 Re: Set up Yaesu Ft3d and Openspot3. You can connect to the TGIF network if you select DMRplus/MARC/TGIF/XLX as the server type, and then select the server for the TGIF network in the server dropdown list. In Quick setup, I select C4FM, then DMRplus/MARC/TGIF/XLX, then TGIF in drop down box and enter 550 in talk group. OPENSPOT 3 TO IPHONE Go to the Network page, Wireless settings section on the OS3 web interface. Make sure Advanced mode is turned on (there's a checkbox for that at the bottom right of the web interface). Set your home Wi-Fi as SSID #1 (and key) and your phone's Wi-Fi as SSID #2 (and key). If your home Wi-Fi (SSID #1) is not reachable then the openSPOT3

will

DMR USER BLOCKED

Re: DMR User Blocked. This blocked message is sent by the BrandMeister Network, not the openSPOT2. The server blocks you if you key too many times over a short time period, and the block is usually lifted after 15 minutes or so. If you are still blocked, please contact their support at https://ask.brandmeister.network/. SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! OPENSPOT3 – SHARKRF The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54.It's updated with new information when a new stable firmware is released. The PDF OPENSPOT2 – SHARKRF The openSPOT2 is a standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT2, Wi-Fi OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENSPOT2 USER MANUAL · GITBOOK openSPOT2 user manual. This user manual is for the stable firmware version v78.It's updated with new information when a new stable firmware is released. The PDF FIRST STEPS · GITBOOK First steps Charging the battery. Connect the openSPOT3 to a USB power supply to start charging the battery. The openSPOT3 is fully functional while it is charging. OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at OPENING THE WEB INTERFACE · GITBOOK You can use SharkRF Link to easily open the web interface of the openSPOT2. Enter the device UID (you can find this ID on the sticker at the bottom of the openSPOT2 SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENTOPENSPOT2SHARKRFPRODUCTSABOUTFORUMOPENSPOT Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! OPENSPOT3 – SHARKRF The openSPOT3 is a battery powered, portable, standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT3, Wi-Fi internet access, and your digital transceiver. OPENSPOT – SHARKRFSEE MORE ON SHARKRF.COM OPENSPOT3 USER MANUAL · GITBOOK openSPOT3 user manual. This user manual is for the stable firmware version v54.It's updated with new information when a new stable firmware is released. The PDF OPENSPOT2 – SHARKRF The openSPOT2 is a standalone digital radio internet gateway (hotspot) designed mainly for amateur radio. You can talk with others on digital radio networks by using an openSPOT2, Wi-Fi OPENSPOT USER MANUAL The method is the same for other connectors. How to configure your transceiver DMR radio setup. Set up a simplex channel (with same RX and TX frequencies), timeslot is irrelevant (you can set it to 1 – they are not used in simplex mode). OPENSPOT2 USER MANUAL · GITBOOK openSPOT2 user manual. This user manual is for the stable firmware version v78.It's updated with new information when a new stable firmware is released. The PDF FIRST STEPS · GITBOOK First steps Charging the battery. Connect the openSPOT3 to a USB power supply to start charging the battery. The openSPOT3 is fully functional while it is charging. OPENING THE WEB INTERFACE · GITBOOK Opening the web interface. You can use SharkRF Link to easily open the web interface of the openSPOT3. Enter the device UID (you can find this ID on the sticker at OPENING THE WEB INTERFACE · GITBOOK You can use SharkRF Link to easily open the web interface of the openSPOT2. Enter the device UID (you can find this ID on the sticker at the bottom of the openSPOT2 SHARKRF – HIGH QUALITY WIRELESS COMMUNICATIONS EQUIPMENT Our brand new full-featured portable wireless hotspot with built-in battery, hardware transcoding and much more is now available! Click here for more information! OPENING THE WEB INTERFACE · GITBOOK You can use SharkRF Link to easily open the web interface of the openSPOT2. Enter the device UID (you can find this ID on the sticker at the bottom of the openSPOT2

TABLE OF CONTENTS

DMR transceiver 6 Fir s t s teps Charging the bat ter y Connect the openSPOT3 to a USB power supply to start charging the battery. The openSPOT3 is fully functional while it is charging. TROUBLESHOOTING · GITBOOK Troubleshooting. Please make sure you always use the latest firmware version.. Do NOT unplug the openSPOT3 during the firmware upgrade! If you can't find an answer to C4FM/FUSION APRS · GITBOOK C4FM/Fusion APRS. You can set up the openSPOT2 to forward your C4FM/Fusion transceiver's location information to the APRS network, so it will be visible on APRS maps like P25REFLECTOR · GITBOOK P25Reflector connector. You can use this connector to connect to a network which supports the P25Reflector protocol, like P25Reflector servers. The easiest way is to use the Quick setup to connect to these networks.. Talkgroup handling USING THE WIRES-X® BUTTON · GITBOOK Using the Wires-X® button. If the openSPOT3's modem is in C4FM (or C4FM Half Deviation) modem mode, then the device will automatically broadcast Wires-X information which will be displayed on radios in Wires-X mode.You can switch your C4FM/Fusion® radio into Wires-X mode by pressing it's Wires-X button (sometimes labelled as DX button).. Note that the transceiver on the animations shown on SIDE PANELS / TOOLS PAGE · GITBOOK Side panels / Tools page. If you are using a computer, or a screen width enough width, the Tools page gets hidden and side panels will show up on the web interface. SET UP YAESU FT3D AND OPENSPOT3 Thanks for the help,all done now. Badger, I followed the quick setup and all of a sudden it sprang into life. Although a couple of things to check, make sure your communication frequency on the Ft3 with the open spot is in mode A as opposed to the B using the A/B button on the

radio.

OPENSPOT3 AUTOMATIC WIFI TRANSFER Lets try this again. The openspot 3 is on Profile 1 Profile 1 has ssid=ABC123, Password=123ABC Home WIFI ssid=ABC123, Password=123ABC Phone WIFI ssid=ABC123, Password=123ABC

SharkRF

High quality wireless communications equipment

* Home

* Products

* About

MenuHomeProductsAbout INTRODUCING THE OPENSPOT3 Our brand new full-featured portable wireless hotspot with BUILT-IN BATTERY, HARDWARE TRANSCODING and MUCH MORE is now available! Click here for more information! __ February 1, 2020 11:14

MORE INFORMATION

* Learn more about the openSPOT3 * Product specifications

* User manual

* HTTP API documentation * UDP API documentation * SharkRF IP Connector Protocol Server * Firmware changelog

© SharkRF 2020

Search for:

We use cookies to ensure that we give you the best experience on our

website.Ok