SHAKER SCREENS

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER Shaker screen clamping system. The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. Just make sure we install screen per user manual or manufacture’s

instruction.

SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL The screen cloth mesh size. Effective screen area, the non blanked area, and so on. The popular shale shaker screen sizes including 700x1050mm, 630x1250mm, 585x1165mm, 710x1250mm, and so on. Mesh sizes for oilfield solids control shaker are usually from API 40 API SHAKER SCREENS DESIGNATION AND FEATURES API shaker screens feature. Shaker screens conform to API 13C designation including the cut point and conductance. To be API RP 13C compliant, a screen must get test on opening size or the particle size can’t pass through screen as per latest practice. The tests describe a screen without predicting its performance. SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. Some convert chart for separation point and API size are based on D50 or D84. DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. Thus we’ll get better dry discharge or finer solid particles. Aipu common shaker are Hunter-D series and Hunter-MG

series. Including 3

SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control is a technique serving a drilling rig to separate the cuttings/solids out. If not cuttings will bring bad effect. Fluids carry out the cuttings out of well surface. Normally, a solids control system contains five stages: shale shaker, vacuum degasser, desander, desilter, and centrifuge. The shale shaker separates solids with DERRICK 48X30 SHAKER SCREEN REPLACEMENT Derrick 48×30 shaker screen. The mesh size are from API 20 to API 325. Cut point from 40.3 to 783.8 microns. Furthermore, certain non blanked area varies much on different type of Derrick 48×30 shaker screen. Furthermore, 48×30 series screen also fit FLC Plus, FLC with AWD, HI-G dryer, and so on shakers. The 48×30 screens are hook strip RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam. POOR BOY DEGASSER IN OIL WELL DRILLING Poor boy degasser in oil drilling. Poor boy degasser also referred to mud gas separator is an ideal equipment to operate when drilling is likely to encounter large volumes of gas. The separators are used primarily to separate and reliably vent large pockets of free gas from the active mud system. Usually it is set ahead of shaker but connected

SHAKER SCREENS

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER Shaker screen clamping system. The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. Just make sure we install screen per user manual or manufacture’s

instruction.

SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL The screen cloth mesh size. Effective screen area, the non blanked area, and so on. The popular shale shaker screen sizes including 700x1050mm, 630x1250mm, 585x1165mm, 710x1250mm, and so on. Mesh sizes for oilfield solids control shaker are usually from API 40 API SHAKER SCREENS DESIGNATION AND FEATURES API shaker screens feature. Shaker screens conform to API 13C designation including the cut point and conductance. To be API RP 13C compliant, a screen must get test on opening size or the particle size can’t pass through screen as per latest practice. The tests describe a screen without predicting its performance. SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. Some convert chart for separation point and API size are based on D50 or D84. DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. Thus we’ll get better dry discharge or finer solid particles. Aipu common shaker are Hunter-D series and Hunter-MG

series. Including 3

SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control is a technique serving a drilling rig to separate the cuttings/solids out. If not cuttings will bring bad effect. Fluids carry out the cuttings out of well surface. Normally, a solids control system contains five stages: shale shaker, vacuum degasser, desander, desilter, and centrifuge. The shale shaker separates solids with DERRICK 48X30 SHAKER SCREEN REPLACEMENT Derrick 48×30 shaker screen. The mesh size are from API 20 to API 325. Cut point from 40.3 to 783.8 microns. Furthermore, certain non blanked area varies much on different type of Derrick 48×30 shaker screen. Furthermore, 48×30 series screen also fit FLC Plus, FLC with AWD, HI-G dryer, and so on shakers. The 48×30 screens are hook strip RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam. POOR BOY DEGASSER IN OIL WELL DRILLING Poor boy degasser in oil drilling. Poor boy degasser also referred to mud gas separator is an ideal equipment to operate when drilling is likely to encounter large volumes of gas. The separators are used primarily to separate and reliably vent large pockets of free gas from the active mud system. Usually it is set ahead of shaker but connected

SHAKER SCREENS

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI REPLACEMENT SHAKER SCREENS FOR SALE Including OEM screen and replacement shaker screens for other famous makes and models. Such as the Hunter-M series screen, Hunter-D series screen, and so on. The replacement shaker screens for sale of famous brand shakers are Derrick FLC500 series, NOV Brandt 4×3 shaker screen, SWACO Mongoose series , and so on. Please find more detail as

below.

SHALE SHAKER SCREEN MATERIAL AND DIFFERENT SCREEN FEATURES It is basic requirements on shale shaker screen material. Qualified S.S is high corrosion-resist, rust-resist. Chemical content, and physical features are much better. Quality screen cloth holds high conductance and larger non-blanked area. For the seal rubber on screen, usually they are sticked on panel back. Optimal material is

HNBR or NBR.

SHAKER SCREEN SIZES FOR DIFFERENT SHALE SHAKER Including the length, width, and the panel overall height or thickness. For example, Derrick PMD 48X30 shaker screen sized 41.125″ x 27.5″ with about 28mm overall height, but, the side hook height is about 4/5″. One more sample, the King Cobra series shaker screen, presently almost overall height is about 28mm, the frame

length is 49.25

REPLACEMENT SCREEN FOR DFE SHALE SHAKERS AT AIPU SOLIDS Replacement screen for DFE shaker at AIPU. Aipu is a professional manufacturer on shaker screens for different makes and models. Such as the SCR series, VSM series, 500 series, Cobra series and so on. For replacement SCR-01 and SCR Minor, we have manufactured for different users around the world. The screen panels will be made from punched

cold

KING COBRA SHAKER SCREENS REPLACEMENT King Cobra series screen are pre-tensioned screen panel. The dimension are known as 1251×635 or with tolerance as 1250x630mm. Supporting frame tube height is 25.4mm or 19.05mm. We call latest version Cobra replacement shaker screen as VENOM series screen. King Cobra screens average weight is about 14kg, while the composite framed panel will be REPLACEMENT SHAKER SCREEN FOR NOV BRANDT SHAKERS Replacement shaker screen from Aipu. Aipu produce all models of replacement screen for NOV Brandt shaker. We promise right fit and completely interchangeable screen panel to all users. Including the King Cobra series screen, VSM series screen, LCM shaker screen, the VNM screens, and etc. The shaker screens are from API 45 to API 400. RUBBER FOR SHAKER SCREENS AND SHAKER IN AIPU SOLIDS CONTROL The rubber is flexible to prevent impact or collision between screen and deck. Screens with rubber including Derrick FLC500 series screen, 48×30 shaker screen, Brandt King Cobra screen, the Swaco ALS series screen, KPT series shaker screen, and so on. Almost rubber material are HNBR or NBR but some are different. Rubber for shaker screens. SHAKER SCREEN SIZE SELECTION DURING WHOLE OIL WELL DRILLINGS At each section, we will select certain screen per actual drilling condition. Take one well of our clients as an example. The first section, they use API 80 and API 100 shaker screen on their FLC514 shaker. While the second section, they use API 200, and API 230. Shaker screen size. For the final part-third section, they use API 120

and API 170

SPARE PARTS FOR DIFFERENT SHALE SHAKER Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out.

SHAKER SCREENS

Manufacture shale shaker screen with API standard. we offer flat, hookstrip, pyramid, polyurethane,composite shaker screens. High quality with competitive price. SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL Shale shaker screen sizes mean the shaker screen dimension also the mesh size. In oilfield or solids control industry, there are many many

different types

DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker holding two deck shaker bed. It is better for solid filtration or separation. Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control system for oil rigs are treated more and more important. Solids control does not only meet demand of oil well drilling efficiency, cost, but API SHAKER SCREENS DESIGNATION AND FEATURES API Shaker screens designation is indicated under same standard. API RP13C is the criteria code all over the world. Aipu produce screen

conform to API

DERRICK 48X30 SHAKER SCREEN REPLACEMENT Derrick 48×30 shaker screen is the screen for Derrick FLC2000 series shaker and mud cleaner.. Derrick 48×30 shaker screen information. 48×30 shaker screens are used on Derrick FLC2000 series shaker. FLC short for Flo line cleaner. RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam. POOR BOY DEGASSER IN OIL WELL DRILLING The mud gas separator unit, with models engineered for use onshore and offshore, is used to reliably separate and reliably vent large pockets of free gas from the drilling fluid system. It is also ideal for use when an operator is drilling with an underbalanced mud column. The compact separator is well-suited for the space limitations of offshore

drilling.

SHAKER SCREENS

Manufacture shale shaker screen with API standard. we offer flat, hookstrip, pyramid, polyurethane,composite shaker screens. High quality with competitive price. SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL Shale shaker screen sizes mean the shaker screen dimension also the mesh size. In oilfield or solids control industry, there are many many

different types

DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker holding two deck shaker bed. It is better for solid filtration or separation. Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control system for oil rigs are treated more and more important. Solids control does not only meet demand of oil well drilling efficiency, cost, but API SHAKER SCREENS DESIGNATION AND FEATURES API Shaker screens designation is indicated under same standard. API RP13C is the criteria code all over the world. Aipu produce screen

conform to API

DERRICK 48X30 SHAKER SCREEN REPLACEMENT Derrick 48×30 shaker screen is the screen for Derrick FLC2000 series shaker and mud cleaner.. Derrick 48×30 shaker screen information. 48×30 shaker screens are used on Derrick FLC2000 series shaker. FLC short for Flo line cleaner. RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam. POOR BOY DEGASSER IN OIL WELL DRILLING The mud gas separator unit, with models engineered for use onshore and offshore, is used to reliably separate and reliably vent large pockets of free gas from the drilling fluid system. It is also ideal for use when an operator is drilling with an underbalanced mud column. The compact separator is well-suited for the space limitations of offshore

drilling.

SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control system for oil rigs are treated more and more important. Solids control does not only meet demand of oil well drilling efficiency, cost, but KING COBRA SHAKER SCREENS REPLACEMENT King Cobra series screen are pre-tensioned screen panel. The dimension are known as 1251×635 or with tolerance as 1250x630mm. Supporting frame tube height is 25.4mm or 19.05mm. REPLACEMENT SCREEN FOR DFE SHALE SHAKERS AT AIPU SOLIDS Replacement screen for DFE shale shakers are main 2 types. They both are hook strap type screen and flat panel. DFE Shale shakers. DFE is a

professional

SHAKER SCREEN SIZES FOR DIFFERENT SHALE SHAKER Shaker screen sizes don’t mean screen panel dimension, but also the screen mesh size or API number. Shaker screen sizes of different shaker. Different shale shaker will be fit with different sized shaker screens. “shaker screen sizes” herein mean the screen panel

dimension.

SHALE SHAKER SCREEN MATERIAL AND DIFFERENT SCREEN FEATURES Shale shaker screen material is the basic support to high quality and performance. Lets find more information and the different features REPLACEMENT SHAKER SCREENS FOR SALE Replacement shaker screens of famous makes and models are all available here. Please contact Aipu shaker screen for price and other

detail

REPLACEMENT SHAKER SCREEN FOR NOV BRANDT SHAKERS NOV Brandt main shakers. As a famous manufacturer of oil and gas drilling equipment, NOV Brandt is well known all over the globe. Their products including rigs, pumps, drilling mud solids control, and many

others.

SCREEN API DESIGNATION AND MESH TYPE OF SHAKER SCREEN Screen API designation is the API size or number with related cut point and NBA, etc. The API designation of shaker screen is decided by

many issues.

SPARE PARTS FOR DIFFERENT SHALE SHAKER Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out. HYDROCYCLONE SEPARATORS FAILURES CAUSE AND CORRECTIONS INFO. Hydrocyclone separators are made of high quality polyurethane material. We use hydrocyclones on desander, desilter and mud cleaner.

Many

SHAKER SCREENS

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER Shaker screen clamping system. The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. Just make sure we install screen per user manual or manufacture’s

instruction.

SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL The screen cloth mesh size. Effective screen area, the non blanked area, and so on. The popular shale shaker screen sizes including 700x1050mm, 630x1250mm, 585x1165mm, 710x1250mm, and so on. Mesh sizes for oilfield solids control shaker are usually from API 40 REPLACEMENT SHAKER SCREENS FOR SALE Including OEM screen and replacement shaker screens for other famous makes and models. Such as the Hunter-M series screen, Hunter-D series screen, and so on. The replacement shaker screens for sale of famous brand shakers are Derrick FLC500 series, NOV Brandt 4×3 shaker screen, SWACO Mongoose series , and so on. Please find more detail as

below.

DECLARATION

Vortex fluid systems is the mark of Vortex fluid systems Inc. DFTS is mark of Drilling Fluids Treatment Systems Inc. Tri-Flo is the mark of Tri-Flo International Inc. *All listed items are right fit replacement shaker screen not originally made by listed famous manufacturer. *All concerned marks are reserved by the original manufacturer and DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. Thus we’ll get better dry discharge or finer solid particles. Aipu common shaker are Hunter-D series and Hunter-MG

series. Including 3

SPARE PARTS FOR DIFFERENT SHALE SHAKER Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out. SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control is a technique serving a drilling rig to separate the cuttings/solids out. If not cuttings will bring bad effect. Fluids carry out the cuttings out of well surface. Normally, a solids control system contains five stages: shale shaker, vacuum degasser, desander, desilter, and centrifuge. The shale shaker separates solids with SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. Some convert chart for separation point and API size are based on D50 or D84. RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam.

SHAKER SCREENS

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI SHAKER SCREEN CLAMPING SYSTEM FOR DIFFERENT SHALE SHAKER Shaker screen clamping system. The framed shaker screen will be pressed by rigid wedge block. We put the screen panel on shaker deck, use a hammer knock block until screen is pressed very tight. For wedge blocked screen, there is a position plate on shaker basket side. Just make sure we install screen per user manual or manufacture’s

instruction.

SHALE SHAKER SCREEN SIZES SELECTION IN SOLIDS CONTROL The screen cloth mesh size. Effective screen area, the non blanked area, and so on. The popular shale shaker screen sizes including 700x1050mm, 630x1250mm, 585x1165mm, 710x1250mm, and so on. Mesh sizes for oilfield solids control shaker are usually from API 40 REPLACEMENT SHAKER SCREENS FOR SALE Including OEM screen and replacement shaker screens for other famous makes and models. Such as the Hunter-M series screen, Hunter-D series screen, and so on. The replacement shaker screens for sale of famous brand shakers are Derrick FLC500 series, NOV Brandt 4×3 shaker screen, SWACO Mongoose series , and so on. Please find more detail as

below.

DECLARATION

Vortex fluid systems is the mark of Vortex fluid systems Inc. DFTS is mark of Drilling Fluids Treatment Systems Inc. Tri-Flo is the mark of Tri-Flo International Inc. *All listed items are right fit replacement shaker screen not originally made by listed famous manufacturer. *All concerned marks are reserved by the original manufacturer and DOUBLE DECK SHALE SHAKER ADVANTAGE AND DISADVANTAGE Double deck shale shaker advantages. Relatively to single deck shakers, double decked one holding 2 times screen area than common one, usually. Thus we’ll get better dry discharge or finer solid particles. Aipu common shaker are Hunter-D series and Hunter-MG

series. Including 3

SPARE PARTS FOR DIFFERENT SHALE SHAKER Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out. SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control is a technique serving a drilling rig to separate the cuttings/solids out. If not cuttings will bring bad effect. Fluids carry out the cuttings out of well surface. Normally, a solids control system contains five stages: shale shaker, vacuum degasser, desander, desilter, and centrifuge. The shale shaker separates solids with SHAKER SCREEN API TO MESH SIZE CONVERSION Shaker screen mesh standard. According to above chart and information we find mesh size or designation from different suppliers will indicate various separation point or D100 cut point then come to certain API size according to latest API RP13C. Some convert chart for separation point and API size are based on D50 or D84. RIG MATTING BOARD USE, FABRICATION, AND TEST PROCESS FOR Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fibreglass material. The wood is Larch or Conifer Pine, and the steel frame is made of high-quality hot rolled carbon steel beam. SHAKER SCREEN SIZES FOR DIFFERENT SHALE SHAKER Including the length, width, and the panel overall height or thickness. For example, Derrick PMD 48X30 shaker screen sized 41.125″ x 27.5″ with about 28mm overall height, but, the side hook height is about 4/5″. One more sample, the King Cobra series shaker screen, presently almost overall height is about 28mm, the frame

length is 49.25

SHALE SHAKER SCREEN MATERIAL AND DIFFERENT SCREEN FEATURES It is basic requirements on shale shaker screen material. Qualified S.S is high corrosion-resist, rust-resist. Chemical content, and physical features are much better. Quality screen cloth holds high conductance and larger non-blanked area. For the seal rubber on screen, usually they are sticked on panel back. Optimal material is

HNBR or NBR.

DECLARATION

Vortex fluid systems is the mark of Vortex fluid systems Inc. DFTS is mark of Drilling Fluids Treatment Systems Inc. Tri-Flo is the mark of Tri-Flo International Inc. *All listed items are right fit replacement shaker screen not originally made by listed famous manufacturer. *All concerned marks are reserved by the original manufacturer and SPARE PARTS FOR DIFFERENT SHALE SHAKER Spare parts for shale shaker are also important for users. Shale shaker is the first phase solids control equipment. All users treat it as critical device. Drilling fluid out of choke manifold will flow into shaker to separate cuttings larger than 74 microns out. SCREEN API DESIGNATION AND MESH TYPE OF SHAKER SCREEN Screen API designation. There are wide range API designation. From API 6 to API 500. The separation point or D100 cut point is from 22.5~3675 microns. We have to realize, the shaker screen API designation is different with mesh size or mesh number. For example, one of our client told us, they ever bought shaker screens from another supplier API RP13C SHAKER SCREEN DETAILS FOR YOUR REFERENCE API RP13C Shaker screen details for your reference. April 16, 2021 Jessie-Aipu. 0 Comment. Shale shaker screen. API 13C Shaker screen means screen panel for shaker from manufacturer holding API certificate and the panels have got API RP13C test report. SOLIDS CONTROL SYSTEM FOR OIL RIG DURING WELL DRILLINGS Solids control is a technique serving a drilling rig to separate the cuttings/solids out. If not cuttings will bring bad effect. Fluids carry out the cuttings out of well surface. Normally, a solids control system contains five stages: shale shaker, vacuum degasser, desander, desilter, and centrifuge. The shale shaker separates solids with HYPERPOOL SHAKER SCREEN REPLACEMENT Hyperpool shaker screen dimension is about 22.5″x42.1″. The PMD Hyperpool will high 1″, while the PMD plus Hyperpool screen will high about 1.5″. According to our present order and inquires, we found major users prefer the pyramid but not plus panel. The hyperpool shaker screens sizes are commonly available from API 40 to API270. API SCREEN WITH DIFFERENT MESH SIZE OF SHAKER SCREENS Different mesh with same API number. API RP 13C aimed to give a clear and standard guidance on screen selection and exchange. Different shaker screen manufacturer will fabricate screens with different mesh

configuration.

KING COBRA SHAKER SCREENS REPLACEMENT King Cobra series screen are pre-tensioned screen panel. The dimension are known as 1251×635 or with tolerance as 1250x630mm. Supporting frame tube height is 25.4mm or 19.05mm. We call latest version Cobra replacement shaker screen as VENOM series screen. King Cobra screens average weight is about 14kg, while the composite framed panel will be

SHAKER SCREENS

API shaker screens,shale shaker screen manufacturer __

* Home

* Shale shaker screen * Solids control equipment

* Download brochure

* Declaration

ADVANCED . STRONG . RELIABLE

Buy Screen

ARTICLES

About shaker screen and solids control equipment

__

MUD TANK VALVE HEIGHT CALCULATION FOR MUD SYSTEM __September 27, 2019 __lebowski

__

0 Comment

__

Solids control equipment Mud tank valve including the suction valve and dump valve. Some are made from common butterfly valve, while some are...

+ Read More

HOW TO CALCULATE SCREEN CONSUMPTION FOR DRILLING RIG? __September 10, 2019 __lebowski

__

0 Comment

__

Shale shaker screen

Screen consumption is an important factor evaluate drilling cost or oil exploration cost. Proper operation or use on screen can...

+ Read More

CONFIGURATION ON SHAKER SCREENS AND THE EFFECTS __August 28, 2019 __lebowski

__

0 Comment

__

Shale shaker screen

Configuration on shaker screens is the combination on screen cloth layer.  The wire mesh size, the wire cloth, and the...

+ Read More

SHAKER SCREENS FAILURES AND POTENTIAL CAUSES __August 13, 2019 __lebowski

__

0 Comment

__

Shale shaker screen

Shaker screens failures are the problem of screen during operation. Do you know the potential cause and how to solve...

+ Read More

HELICAL BEVEL GEARED MUD AGITATORS DELIVERED TO MIDDLE EAST __August 3, 2019 __lebowski

__

0 Comment

__

Solids control equipment Helical bevel geared mud agitators delivered are horizontal type. The end user is in Middle East. This is their 4th...

+ Read More

SHAKER SCREEN COLORS AND WHY THERE ARE DIFFERENT COLORS __July 24, 2019 __lebowski

__

0 Comment

__

Shale shaker screen

Shaker screen colors are the color of screen frame. No matter the steel one or the composite frame one, the...

+ Read More

1 2 3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

SEARCH

SHAKER SCREEN ARCHIVES * __ September 2019  (2) * __ August 2019  (3) * __ July 2019  (3) * __ June 2019  (1)

* __ May 2019  (2)

* __ April 2019  (3) * __ March 2019  (4) * __ February 2019  (2) * __ January 2019  (4) * __ December 2018  (4) * __ November 2018  (3) * __ October 2018  (2) * __ September 2018  (3) * __ August 2018  (4) * __ July 2018  (4) * __ June 2018  (4)

* __ May 2018  (8)

* __ April 2018  (6) * __ March 2018  (4) * __ February 2018  (2) * __ January 2018  (14) * __ December 2017  (7) * __ November 2017  (5) * __ October 2017  (3) * __ September 2017  (4) * __ August 2017  (5) * __ July 2017  (4) * __ June 2017  (9)

* __ May 2017  (5)

* __ April 2017  (7) * __ March 2017  (5) * __ February 2017  (11) * __ January 2017  (7) * __ December 2016  (9) * __ November 2016  (3) * __ October 2016  (6) * __ September 2016  (8) * __ August 2016  (13) * __ July 2016  (16) * __ June 2016  (13) * __ May 2016  (28) * __ April 2016  (29) * __ March 2016  (9) SHAKER SCREEN RECENT POSTS * __ Mud tank valve height calculation for mud system * __ How to calculate screen consumption for drilling rig? * __ Configuration on shaker screens and the effects * __ Shaker screens failures and potential causes * __ Helical bevel geared mud agitators delivered to Middle East * __ Shaker screen colors and why there are different colors * __ Shaker screens life and the performance affecting issues * __ Why shaker screens are multiple-layer configured * __ Linear motion shale shaker at AIPU for sale * __ Shaker screens tendency in the future MONGOOSE® SHAKER SCREEN REPLACEMENT

details

DERRICK® SHAKER SCREEN REPLACEMENT

details

POLYURETHANE SHAKER SCREEN

details

SWACO® SHAKER SCREEN REPLACEMENT

details

KEMTRON KTL48 SHAKER SCREEN REPLACEMENT

details

BRANDT® SHAKER SCREEN REPLACEMENT

details

FRIEND LINK

* AiPu solid control * Mud clean equipment * Shaker screen manufacturer * solids control blog

* drilling fluids

* shale shaker

__

*

ABOUT THIS BLOG

Articles in this blog are mainly about replacement shaker screens, especially how high-efficiency to use shale shaker screens and replacement shaker screens. But some are about solids control equipment that we can provide you also. Aipu provide replacement shaker screens including but not limited to following makes: Derrick®, NOV Brandt®, MI-Swaco®, KEMTRON®, VORTEX®, TRITON® and so on

*

FOLLOW US

*

CONTACT

CN:+86-18691483929

Tel: +86-29-63611979 63611978 7×24 Hotline: +86-18691483929 Fax: +86-29-86213700

skype:

Address: 4th Rd Jingyuan, Jinghe Industry Zone, Xi’an,China Email: sales@aipusolidcontrol.com Website: Aipu shale shaker screen COPYRIGHT ® ShakerScreens Based On Aipu Solids Control Equipment This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

.

____

* Home

* Shale shaker screen * Solids control equipment

* Download brochure

* Declaration