2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates. 2021 F350 6.7 DIESEL 4 Posts. Discussion Starter · #1 · 5 mo ago. I bought a new 2021 F350 6.7. The window sticker says it has a blocker heater but I can not locate it anywhere. Am I looking for a male 110 volt cord end or some other cord that needs an adaptor. Please help. Everything I've read says not to idle to warm up the engine but I can't believe its NEW 2021-A QUESTION RE: DEF I just picked up a brand new 2021 F-250 Lariat in Iconic Silver with the Blackout Package. After I got it home, I was thumbing through the menu items and saw that the DEF was low. Started to add DEF and it spilled every where. Does it take a while for these new trucks to

register the amount

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol. P207F | FORD POWERSTROKE DIESEL FORUM 2015 F250 6.7L. New to site and no where near a mechanic but wanted to post on here to try and make sure dealership doesn't take me to cleaners. CEL came on and auto zone said code was P207F. Took to dealership on Mon 12 Oct. They reprogrammed and

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of

LOW EBP ON 6.0?

7,759 Posts. #7 · 7 mo ago (Edited) Edge products have had issues with correct EBP as well as the SCT. It is an issue on 04 model years for sure. Not 100% sure about later model years. Just to be thorough, the 03's and early 04's (ie the 03 engine) does not use the EBP sensor output if the engine strategy was ever re-flashed after mid-2006. NO START, NO CRANKING? crash444. You could have a bad EGT probe in the exhaust. If the probe goes bad you can't start the truck. There is a wire behind the passenger side battery with a round connector. Take the connector loose and use a jumper wire to touch it to the positive battery terminal with the key on and the truck should start. LESSONS LEARNED FROM THE DEF HEATER AND PUMP REPLACEMENT LESSONS LEARNED View attachment 770630 1. You can do this entire job on a floor creeper - garage lift is not required. 2. Try and do the work in a warm environment (minimum 45-65°F/10°C) and wash prior underneath the area to remove dust and dirt from the top of the DEF

tank.

TESTING FUEL PRESSURE ON 7.3 I am looking to test fuel pressure on my 7.3, I do not have a gauge and I'm not looking to spend a lot on a gauge, will this work to test my fuel pressure on the fuel bowl? It won't let me post a link, but its harbor freight part number "62623" If not, can someone find one on

harbor freight's

2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates. 2021 F350 6.7 DIESEL 4 Posts. Discussion Starter · #1 · 5 mo ago. I bought a new 2021 F350 6.7. The window sticker says it has a blocker heater but I can not locate it anywhere. Am I looking for a male 110 volt cord end or some other cord that needs an adaptor. Please help. Everything I've read says not to idle to warm up the engine but I can't believe its NEW 2021-A QUESTION RE: DEF I just picked up a brand new 2021 F-250 Lariat in Iconic Silver with the Blackout Package. After I got it home, I was thumbing through the menu items and saw that the DEF was low. Started to add DEF and it spilled every where. Does it take a while for these new trucks to

register the amount

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol. P207F | FORD POWERSTROKE DIESEL FORUM 2015 F250 6.7L. New to site and no where near a mechanic but wanted to post on here to try and make sure dealership doesn't take me to cleaners. CEL came on and auto zone said code was P207F. Took to dealership on Mon 12 Oct. They reprogrammed and

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of

LOW EBP ON 6.0?

7,759 Posts. #7 · 7 mo ago (Edited) Edge products have had issues with correct EBP as well as the SCT. It is an issue on 04 model years for sure. Not 100% sure about later model years. Just to be thorough, the 03's and early 04's (ie the 03 engine) does not use the EBP sensor output if the engine strategy was ever re-flashed after mid-2006. NO START, NO CRANKING? crash444. You could have a bad EGT probe in the exhaust. If the probe goes bad you can't start the truck. There is a wire behind the passenger side battery with a round connector. Take the connector loose and use a jumper wire to touch it to the positive battery terminal with the key on and the truck should start. LESSONS LEARNED FROM THE DEF HEATER AND PUMP REPLACEMENT LESSONS LEARNED View attachment 770630 1. You can do this entire job on a floor creeper - garage lift is not required. 2. Try and do the work in a warm environment (minimum 45-65°F/10°C) and wash prior underneath the area to remove dust and dirt from the top of the DEF

tank.

TESTING FUEL PRESSURE ON 7.3 I am looking to test fuel pressure on my 7.3, I do not have a gauge and I'm not looking to spend a lot on a gauge, will this work to test my fuel pressure on the fuel bowl? It won't let me post a link, but its harbor freight part number "62623" If not, can someone find one on

harbor freight's

2021 F350 6.7 DIESEL 4 Posts. Discussion Starter · #1 · 5 mo ago. I bought a new 2021 F350 6.7. The window sticker says it has a blocker heater but I can not locate it anywhere. Am I looking for a male 110 volt cord end or some other cord that needs an adaptor. Please help. Everything I've read says not to idle to warm up the engine but I can't believe its 6.0 “MISFIRE” MYSTERY 15 Posts. Discussion Starter · #1 · 8 mo ago. Hey guys, I have a very strange issue going on with my 6.0 that I need some help with. Let me start from the beginning. A few months back I started having a misfire issue with no codes so I decided to go ahead and re-seal injectors. I was in a time crunch since this is my daily driver so I

figured

COST OF BULLETPROOFING Hello guys and gals, I'm looking at a 6.0 with 245k on it. I just emailed the person about it today. If it hasn't been bulletproofedwhat is the average cost of doing the recommended steps to bulletproof it? I currently have a 7.3, but it's a DRW and I would rather have a SRW.

If I sell

6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

LESSONS LEARNED FROM THE DEF HEATER AND PUMP REPLACEMENT LESSONS LEARNED View attachment 770630 1. You can do this entire job on a floor creeper - garage lift is not required. 2. Try and do the work in a warm environment (minimum 45-65°F/10°C) and wash prior underneath the area to remove dust and dirt from the top of the DEF

tank.

TESTING FUEL PRESSURE ON 7.3 I am looking to test fuel pressure on my 7.3, I do not have a gauge and I'm not looking to spend a lot on a gauge, will this work to test my fuel pressure on the fuel bowl? It won't let me post a link, but its harbor freight part number "62623" If not, can someone find one on

harbor freight's

ROTELLA T6 5W40 OR 15W40 IN 6.0 I purchased my 6.0 three years ago. On my first oil change, I switched to Rotella T6 5w40. Somewhere I read a Ford Bulletin saying that when switching to a synthetic, 5w40 was an approved oil for use in the 6.0. I've put over 35,000 miles on it since the oil type change. Two oil

changes ago

HOW MUCH COOLANT?

elchaseo. It's about 7 gallons. After multiple water and distilled flushes it's mostly water. You cant drain the entire system so once flushing with distilled water is completed dump in 3.5 gallons of coolant concentrate and top off with distilled to yield a 50/50 mix. 7.3 JUST STARTED DOING A LONG CRANK TO START Discussion Starter · #1 · Oct 17, 2010. My 99.5 250 hp 7.3 has just started doing the long crank issue. Truck has always started on the second to third time the engine turns over. Now its 8 or 10 times before it starts. I went to the store and it started fine, went to leave store, and it was 8-10 times and has been that way for a week

now.

DRIVESHAFT SLIP JOINT GREASE??? i assume you are talking about the slip joint. i would grease the splines but would NOT pack it with grease. when your suspension collapses, it will basically cause the drive shaft to hydro lock. Click to expand I would think it'd blow the boot apart before it did this (or at least put a nice split in it). G. 2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of NO START, NO CRANKING? crash444. You could have a bad EGT probe in the exhaust. If the probe goes bad you can't start the truck. There is a wire behind the passenger side battery with a round connector. Take the connector loose and use a jumper wire to touch it to the positive battery terminal with the key on and the truck should start. ***NEW INFO ON MERCON SP VS LV*** The facts of the matter are as follows: 1. Any 6 speed transmission that was serviced with LV, will probably suffer complete failure. 2. Transmissions that were flushed at the dealership using LV fluid will suffer failure earlier than transmissions where LV was used to top off the transmission. 3. 7.3 JUST STARTED DOING A LONG CRANK TO START Discussion Starter · #1 · Oct 17, 2010. My 99.5 250 hp 7.3 has just started doing the long crank issue. Truck has always started on the second to third time the engine turns over. Now its 8 or 10 times before it starts. I went to the store and it started fine, went to leave store, and it was 8-10 times and has been that way for a week

now.

DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler 6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

BRAKE FLUID RECOMMENDATIONS Combine those two and your back into brake fluid boil territory if there is no proper maintenance. Higher metallic friction material has a higher rate of thermal transfer. Other problems with lack of brake fluid maintenance are rust. ABS valving is no longer an issue, so worrying about the ABS is 6.7 HIGH PRESSURE FUEL PUMP FAILURE... Ford makes a kit to replace the fuel lines, high pressure pump, injectors and other parts for like $3500 includes core charge for high pressure pump. The dealer can get 10K if they price the parts individually. If they could do it for 5K, go for it. 2011-2014 -

EC3Z-9B246-A.

NO 12V POWER ON TRAILER PLUG If yours are empty like mine were, go get two relays and plug them in. Then get a 30A Maxi Fuse and plug it into position 16 in the under hood fuse box. 16=Trailer Tow Battery Charge. This should give you power to your orange wire (switched 12v) on your 7 pin trailer harness. Kind of stupid that Ford didn't give you the relay and fuse

to make

2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of NO START, NO CRANKING? crash444. You could have a bad EGT probe in the exhaust. If the probe goes bad you can't start the truck. There is a wire behind the passenger side battery with a round connector. Take the connector loose and use a jumper wire to touch it to the positive battery terminal with the key on and the truck should start. ***NEW INFO ON MERCON SP VS LV*** The facts of the matter are as follows: 1. Any 6 speed transmission that was serviced with LV, will probably suffer complete failure. 2. Transmissions that were flushed at the dealership using LV fluid will suffer failure earlier than transmissions where LV was used to top off the transmission. 3. 7.3 JUST STARTED DOING A LONG CRANK TO START Discussion Starter · #1 · Oct 17, 2010. My 99.5 250 hp 7.3 has just started doing the long crank issue. Truck has always started on the second to third time the engine turns over. Now its 8 or 10 times before it starts. I went to the store and it started fine, went to leave store, and it was 8-10 times and has been that way for a week

now.

DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler 6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

BRAKE FLUID RECOMMENDATIONS Combine those two and your back into brake fluid boil territory if there is no proper maintenance. Higher metallic friction material has a higher rate of thermal transfer. Other problems with lack of brake fluid maintenance are rust. ABS valving is no longer an issue, so worrying about the ABS is 6.7 HIGH PRESSURE FUEL PUMP FAILURE... Ford makes a kit to replace the fuel lines, high pressure pump, injectors and other parts for like $3500 includes core charge for high pressure pump. The dealer can get 10K if they price the parts individually. If they could do it for 5K, go for it. 2011-2014 -

EC3Z-9B246-A.

NO 12V POWER ON TRAILER PLUG If yours are empty like mine were, go get two relays and plug them in. Then get a 30A Maxi Fuse and plug it into position 16 in the under hood fuse box. 16=Trailer Tow Battery Charge. This should give you power to your orange wire (switched 12v) on your 7 pin trailer harness. Kind of stupid that Ford didn't give you the relay and fuse

to make

NEW 2021-A QUESTION RE: DEF I just picked up a brand new 2021 F-250 Lariat in Iconic Silver with the Blackout Package. After I got it home, I was thumbing through the menu items and saw that the DEF was low. Started to add DEF and it spilled every where. Does it take a while for these new trucks to

register the amount

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol.

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of

6.7 DERRINGER TUNER

Banks also set the land speed record with a 6.7L power stroke on E-20 fuel (20% bio diesel), they are pretty much the authority on 6.7L performance modifications, sadly they don't have jack available or in development for the 2016 power strokes. 1 - 20 of 98 Posts. 1. DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler

6.0 WITH NO BOOST

Joined Dec 6, 2010. ·. 6,292 Posts. #6 · Jun 22, 2011. Qikstang said: Hello, hope that I can get some help here. I have a 04 Excursion with a 6.0 and just had #4 and 5 injectors and frame mounted fuel pump replaced and on way home lost all boost. Motor will rev to 3000 or so RPM's but no boost at all. Can't even hear turbo spooling. ***NEW INFO ON MERCON SP VS LV*** The facts of the matter are as follows: 1. Any 6 speed transmission that was serviced with LV, will probably suffer complete failure. 2. Transmissions that were flushed at the dealership using LV fluid will suffer failure earlier than transmissions where LV was used to top off the transmission. 3. 6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

SPEED SENSOR

Joined Dec 6, 2006. ·. 3,885 Posts. #3 · Oct 12, 2008. The vehicle speed sensor is at the top, rear of the transmission. The sensor at the rear in the rear diff is the ABS speed sensor. The tranny speed sensor is what sends info to the instrument cluster (speedo) and to the PCM. Your truck does not run the speedo from the rear diff!

:crazy:

HOW MANY MILES CAN A 6.0 GO? The answer is 258,685.5 miles before failure. TO be fair it was a failure of the fuel system, the 6.0 is still working. The suction pipe rotted out and the system started sucking air when it got below 3/8s. I just assumed that the fuel gauge was reading high. 2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

6.7 DERRINGER TUNER

Banks also set the land speed record with a 6.7L power stroke on E-20 fuel (20% bio diesel), they are pretty much the authority on 6.7L performance modifications, sadly they don't have jack available or in development for the 2016 power strokes. 1 - 20 of 98 Posts. 1. 2022 FORD SUPER DUTY ORDER GUIDE...03/21/2021 Premium Member. Joined Oct 16, 2007. ·. 11,168 Posts. Discussion Starter · #5 · 2 mo ago. 2022 Initial Orders: 15 March 2021. 2022

Production Start:

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler 6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

P0263 CODE | FORD POWERSTROKE DIESEL FORUM 82 Posts. Discussion Starter · #1 · May 9, 2016. Just finished bulletproofing my early 04. Everything went great. When I cranked it was idling rough. Showing code p0263 cylinder #1 contribution/balance. Any one else came across this problem. Checked the connection, harness looks good. I did clean the injectors while they were out. BEST COOLANT FOR A 6.0 The Cat ELC follows a standard so as theories go any coolant that follows that same standard will perform the same. I got my Rotella ELC Concentrate from Amazon. I watch the price and have been able to grab it around $20 but it usually hovers between $25 and $28 a gal with

Prime.

BRAKE FLUID RECOMMENDATIONS Combine those two and your back into brake fluid boil territory if there is no proper maintenance. Higher metallic friction material has a higher rate of thermal transfer. Other problems with lack of brake fluid maintenance are rust. ABS valving is no longer an issue, so worrying about the ABS is 6.7 HIGH PRESSURE FUEL PUMP FAILURE... Ford makes a kit to replace the fuel lines, high pressure pump, injectors and other parts for like $3500 includes core charge for high pressure pump. The dealer can get 10K if they price the parts individually. If they could do it for 5K, go for it. 2011-2014 -

EC3Z-9B246-A.

2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

6.7 DERRINGER TUNER

Banks also set the land speed record with a 6.7L power stroke on E-20 fuel (20% bio diesel), they are pretty much the authority on 6.7L performance modifications, sadly they don't have jack available or in development for the 2016 power strokes. 1 - 20 of 98 Posts. 1. 2022 FORD SUPER DUTY ORDER GUIDE...03/21/2021 Premium Member. Joined Oct 16, 2007. ·. 11,168 Posts. Discussion Starter · #5 · 2 mo ago. 2022 Initial Orders: 15 March 2021. 2022

Production Start:

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler 6.4 MOTOR LIFE EXPECTANCY 19,111 Posts. #4 · Jun 19, 2016. My wife's 6.4 has 252k miles on it. This is it's second engine because the first one lost a valve. The donor engine had about 100k miles on it when it went in so this engine has about 200k miles on it now. These things can run well over the

long term if

P0263 CODE | FORD POWERSTROKE DIESEL FORUM 82 Posts. Discussion Starter · #1 · May 9, 2016. Just finished bulletproofing my early 04. Everything went great. When I cranked it was idling rough. Showing code p0263 cylinder #1 contribution/balance. Any one else came across this problem. Checked the connection, harness looks good. I did clean the injectors while they were out. BEST COOLANT FOR A 6.0 The Cat ELC follows a standard so as theories go any coolant that follows that same standard will perform the same. I got my Rotella ELC Concentrate from Amazon. I watch the price and have been able to grab it around $20 but it usually hovers between $25 and $28 a gal with

Prime.

BRAKE FLUID RECOMMENDATIONS Combine those two and your back into brake fluid boil territory if there is no proper maintenance. Higher metallic friction material has a higher rate of thermal transfer. Other problems with lack of brake fluid maintenance are rust. ABS valving is no longer an issue, so worrying about the ABS is 6.7 HIGH PRESSURE FUEL PUMP FAILURE... Ford makes a kit to replace the fuel lines, high pressure pump, injectors and other parts for like $3500 includes core charge for high pressure pump. The dealer can get 10K if they price the parts individually. If they could do it for 5K, go for it. 2011-2014 -

EC3Z-9B246-A.

NEW 2021-A QUESTION RE: DEF I just picked up a brand new 2021 F-250 Lariat in Iconic Silver with the Blackout Package. After I got it home, I was thumbing through the menu items and saw that the DEF was low. Started to add DEF and it spilled every where. Does it take a while for these new trucks to

register the amount

2022 FORD SUPER DUTY ORDER GUIDE...03/21/2021 Premium Member. Joined Oct 16, 2007. ·. 11,168 Posts. Discussion Starter · #5 · 2 mo ago. 2022 Initial Orders: 15 March 2021. 2022

Production Start:

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol. EXPECTED ENGINE LIFE OF 6.7 2,047 Posts. Discussion Starter · #1 · Oct 19, 2013. Do we have a expected mechanical engine life of the 6.7,I am upgrading from my 6.0 that only has 69k on it 05 and was going to go 6.4 at around 100k since I could tear junk off and have pretty reliable truck. I found a high mileage 6.7 150k for about same money and just wondering opinions

6.0 WITH NO BOOST

Joined Dec 6, 2010. ·. 6,292 Posts. #6 · Jun 22, 2011. Qikstang said: Hello, hope that I can get some help here. I have a 04 Excursion with a 6.0 and just had #4 and 5 injectors and frame mounted fuel pump replaced and on way home lost all boost. Motor will rev to 3000 or so RPM's but no boost at all. Can't even hear turbo spooling. BEST CHOICE FOR ALTERNATOR 4,330 Posts. #8 · Dec 30, 2016. I use the Autozone 140 amp, with an OEM alternator in my break down kit. I do wish I had went with a Mean Green 220 Amp with the upgraded battery cables. My alternator went out in my truck and I bought a 110 Amp rebuilt OEM alternator at Ford and would never get above 12.9 V when charging. ***NEW INFO ON MERCON SP VS LV*** The facts of the matter are as follows: 1. Any 6 speed transmission that was serviced with LV, will probably suffer complete failure. 2. Transmissions that were flushed at the dealership using LV fluid will suffer failure earlier than transmissions where LV was used to top off the transmission. 3. P0263 CODE | FORD POWERSTROKE DIESEL FORUM 82 Posts. Discussion Starter · #1 · May 9, 2016. Just finished bulletproofing my early 04. Everything went great. When I cranked it was idling rough. Showing code p0263 cylinder #1 contribution/balance. Any one else came across this problem. Checked the connection, harness looks good. I did clean the injectors while they were out.

SPEED SENSOR

Joined Dec 6, 2006. ·. 3,885 Posts. #3 · Oct 12, 2008. The vehicle speed sensor is at the top, rear of the transmission. The sensor at the rear in the rear diff is the ABS speed sensor. The tranny speed sensor is what sends info to the instrument cluster (speedo) and to the PCM. Your truck does not run the speedo from the rear diff!

:crazy:

HOW MANY MILES CAN A 6.0 GO? The answer is 258,685.5 miles before failure. TO be fair it was a failure of the fuel system, the 6.0 is still working. The suction pipe rotted out and the system started sucking air when it got below 3/8s. I just assumed that the fuel gauge was reading high. 2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

BEST STARTER?

Joined Mar 17, 2013. ·. 1,905 Posts. #7 · May 2, 2020. TempestV said: I have a 2001 f350 with 340k in need of a starter. I see starters ranging from less than $100 for a stock replacement to $400 for the mean green gear reduction, and everything in between. I'm willing to spend up to the $400 if it really means that I'll get a

better starter

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol. P207F | FORD POWERSTROKE DIESEL FORUM 2015 F250 6.7L. New to site and no where near a mechanic but wanted to post on here to try and make sure dealership doesn't take me to cleaners. CEL came on and auto zone said code was P207F. Took to dealership on Mon 12 Oct. They reprogrammed and

NO BOOST!!!!!

Registered. Joined Jul 21, 2009. ·. 387 Posts. #3 · Dec 22, 2010. If for any reason the variable turbo sticks or is not functioning, you will have an extreme loss in power. These new trucks use incoming air to calculate how much fuel to use, so if you are building no

ECM/PCM REPLACEMENT

Discussion Starter · #1 · May 15, 2019. Hi guys I just bought another 06 F-250 crew cab. After driving it for a couple days I’m starting to get the impression that my truck has a tuner married to it. But I went to Ford asked for a re-flash they told me it will cost $400. But I was looking around I found a reman ecm/pcm for under $200

with

7.3 COMPRESSION TEST PROCEDURE 484 Posts. #2 · Jul 7, 2009. disconnect the ecm power. remove all injector. or if it is done through the glow plugs then remove all glow plugs. remove the air filter. the engine needs to crank at 175 rpm 4 a minimum. Record your readings on paper. do not remove the injectors, they test it through the glow plug hole. remove all glow plugs. 7.3 NO WAIT TO START LIGHT 2000 Ford F250 Super Duty 7.3 Crew Cab 4x4 2003 Ford F250 Super Duty 7.3 Crew Cab 4x2 1982 Ferrari 308 GTB Quattrovalvole 1982 Bluebird

FC35 Wanderlodge

DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler BEST COOLANT FOR A 6.0 The Cat ELC follows a standard so as theories go any coolant that follows that same standard will perform the same. I got my Rotella ELC Concentrate from Amazon. I watch the price and have been able to grab it around $20 but it usually hovers between $25 and $28 a gal with

Prime.

2022 INITIAL ORDERS/ 2022 PRODUCTION START DATES 2022 Initial Orders: 15 March 2021. 2022 Production Start: 01 June 2021. As of yet I don't have or have seen the 2022 Order Guides posted/shared. I do not expect any huge changes. I'm going with the 2023 trucks are most likely going to see the interior updates.

BEST STARTER?

Joined Mar 17, 2013. ·. 1,905 Posts. #7 · May 2, 2020. TempestV said: I have a 2001 f350 with 340k in need of a starter. I see starters ranging from less than $100 for a stock replacement to $400 for the mean green gear reduction, and everything in between. I'm willing to spend up to the $400 if it really means that I'll get a

better starter

SUGGESTIONS FOR NEW SHOCKS... Plus I used procomp springs up front for the level kit so it made choosing the right length much easier. If you haven't ordered shocks i'll have some miles on Saturday/sunday with new shocks to see. I experience -15 to 100 degrees where the majority is under 60 degrees so I'll have some winter feedback soon lol. P207F | FORD POWERSTROKE DIESEL FORUM 2015 F250 6.7L. New to site and no where near a mechanic but wanted to post on here to try and make sure dealership doesn't take me to cleaners. CEL came on and auto zone said code was P207F. Took to dealership on Mon 12 Oct. They reprogrammed and

NO BOOST!!!!!

Registered. Joined Jul 21, 2009. ·. 387 Posts. #3 · Dec 22, 2010. If for any reason the variable turbo sticks or is not functioning, you will have an extreme loss in power. These new trucks use incoming air to calculate how much fuel to use, so if you are building no

ECM/PCM REPLACEMENT

Discussion Starter · #1 · May 15, 2019. Hi guys I just bought another 06 F-250 crew cab. After driving it for a couple days I’m starting to get the impression that my truck has a tuner married to it. But I went to Ford asked for a re-flash they told me it will cost $400. But I was looking around I found a reman ecm/pcm for under $200

with

7.3 COMPRESSION TEST PROCEDURE 484 Posts. #2 · Jul 7, 2009. disconnect the ecm power. remove all injector. or if it is done through the glow plugs then remove all glow plugs. remove the air filter. the engine needs to crank at 175 rpm 4 a minimum. Record your readings on paper. do not remove the injectors, they test it through the glow plug hole. remove all glow plugs. 7.3 NO WAIT TO START LIGHT 2000 Ford F250 Super Duty 7.3 Crew Cab 4x4 2003 Ford F250 Super Duty 7.3 Crew Cab 4x2 1982 Ferrari 308 GTB Quattrovalvole 1982 Bluebird

FC35 Wanderlodge

DRIVESHAFT SLIP JOINT GREASE??? NCH Proud Father of USAF Airman:thumb: 2000 F350 DRW,CC,LB, 4X4, Western Hauler Pkg. Ford AIS/ BTM, FTVB My CCV MOD, Coolant filter 06 Grill, 05 lights,6.0 trans cooler BEST COOLANT FOR A 6.0 The Cat ELC follows a standard so as theories go any coolant that follows that same standard will perform the same. I got my Rotella ELC Concentrate from Amazon. I watch the price and have been able to grab it around $20 but it usually hovers between $25 and $28 a gal with

Prime.

NEW 2021-A QUESTION RE: DEF I just picked up a brand new 2021 F-250 Lariat in Iconic Silver with the Blackout Package. After I got it home, I was thumbing through the menu items and saw that the DEF was low. Started to add DEF and it spilled every where. Does it take a while for these new trucks to

register the amount

ECM/PCM REPLACEMENT

Discussion Starter · #1 · May 15, 2019. Hi guys I just bought another 06 F-250 crew cab. After driving it for a couple days I’m starting to get the impression that my truck has a tuner married to it. But I went to Ford asked for a re-flash they told me it will cost $400. But I was looking around I found a reman ecm/pcm for under $200

with

6.4 LIFE EXPECTANCY

GregWork said: Due to design deficiencies, the 6.4L is a 150K +/- 50K disposable engine. I looked at literally hundreds of trucks in person and a thousand online, with the initial intent of buying a 6.4L. After much due diligence, I discovered the 6.4 to be too much of

PCM WIRING DIAGRAM

2004 F350 CC DRW King Ranch X-3 tunes by DJ'S,QT,GH,ID. Gryphon FICM tunes, ARP studs,Stage 1turbo,ATS coolant recirc lines,Swamp's 48v ficm,coolant filter,AD2,Snow Perf stage II,EGR delete,4" turbo back straight pipe,S&Bintake,Quad "A" pillar autometer gauges,Suncoast Tri Disk Conv.,Billet input shaft,Suncoast superduty rebuild kit,Trans-go shift kit,Mag-Hytec trans pan,CFM+

LOW EBP ON 6.0?

7,759 Posts. #7 · 7 mo ago (Edited) Edge products have had issues with correct EBP as well as the SCT. It is an issue on 04 model years for sure. Not 100% sure about later model years. Just to be thorough, the 03's and early 04's (ie the 03 engine) does not use the EBP sensor output if the engine strategy was ever re-flashed after mid-2006. HOW MANY MILES CAN A 6.0 GO? The answer is 258,685.5 miles before failure. TO be fair it was a failure of the fuel system, the 6.0 is still working. The suction pipe rotted out and the system started sucking air when it got below 3/8s. I just assumed that the fuel gauge was reading high.

P218F CODE HELP

Discussion Starter · #1 · May 10, 2017. First thank you for any help. I received the dreaded 50 mile message and checked the code and received P218f code. I have read several of the ford releases on the code and see that it directs me towards the def injector nozzle. This is the first issue I have had with the 2015 6.7 and it has 65000

miles.

HYDROBOOST/STEERING

Ok, so I installed a reman gearbox due to play about a month ago along with ball joints and a hub assembly. About 3 days ago, I lost power steering. It was very hard to turn especially trying to park. I did notice if my foot is on the brake is when it gets harder to turn. It is to the point that

SPEED SENSOR

Joined Dec 6, 2006. ·. 3,885 Posts. #3 · Oct 12, 2008. The vehicle speed sensor is at the top, rear of the transmission. The sensor at the rear in the rear diff is the ABS speed sensor. The tranny speed sensor is what sends info to the instrument cluster (speedo) and to the PCM. Your truck does not run the speedo from the rear diff!

:crazy:

SIGNS AND SYMPTOMS OF A TURBO GOING BAD 2) Under a load it makes a very loud screeching sound ( almost like a belt slipping ) and has NO Power ! I noticed this about 6 mos ago. ( first sign of going out I found ) 3) When I shut the truck off it sounds like a beer can rattling around in the exhaust pipe. YES my Turbo has been out for awhile ! LOL.

*

Google search

*

VB search

×

search

* Search

* Home

* Forums

* Forums

* Powerstroke.ORG News and Polls * Powerstroke.ORG News * Powerstroke.org Merchandise

* TECH Exchange

* What is This?

* General Topics

* Introductions

* General Diesel Discussion * Suspension & Steering * Wheels, Tires, and Brakes * Powerstroke.org Builds & Projects * Powerstroke Forum Polls * Forum Help and Info

* Specialty Forums

* 911 Urgent Situations

* Rig Of The Month!

* Articles

* Video/Movie Forum

* Kill Stories

* Bio-Diesel/Alternative Fuels and Supplements * Towing, Hauling & Diesel Competition

* Ford Gassers

* F150 3.0L Powerstroke Forums * General 3.0L Discussion * 3.0L Performance Parts Discussion * 3.0L Problems Forum * 3.0L Powerstroke Interior Discussion * 3.0L Exterior Discussion * 3.0L Electronics Discussion

* 3.0L Tech Files

* Ford 2020+ 6.7L Powerstroke Forums * General 6.7 Discussion (2020+) * 6.7 Performance Parts Discussion (2020+) * 6.7 Problems Forum (2020+) * 6.7 Powerstroke Interior Discussion (2020+) * 6.7 Exterior Discussion (2020+) * 6.7 Electronics Discussion (2020+) * 6.7 Tech Files (2020+) * Ford 17-19 6.7L Powerstroke Forums * General 6.7 Discussion (2017-2019) * 6.7 Performance Parts Discussion (2017-2019) * 6.7 Problems Forum (2017-2019) * 6.7 Powerstroke Interior Discussion (2017-2019) * 6.7 Exterior Discussion (2017-2019) * 6.7 Electronics Discussion (2017-2019) * 6.7 Tech Files (2017-2019) * Ford 11-16 6.7L Powerstroke Forums * General 6.7 Discussion (2011-2016) * 6.7 Performance Parts Discussion (2011-2016) * 6.7 Problems Forum (2011-2016) * 6.7 Powerstroke Interior Discussion (2011-2016) * 6.7 Exterior Discussion (2011-2016) * 6.7 Electronics Discussion (2011-2016) * 6.7 Tech Files (2011-2016) * Ford 08-10 6.4L Powerstroke Forums * General 6.4L Discussion * 6.4L Performance Parts Discussion * 6.4L Problems Forum * 6.4 Powerstroke Interior Discussion * 6.4 Exterior Discussion * 6.4 Electronics Discussion

* 6.4 Tech Files

* Ford 03-07 6.0L Powerstroke Forums * General 6.0L Discussion * 6.0L Performance Parts Discussion * 6.0L Problems Forum * 6.0L Powerstroke Interior Discussion * 6.0L Exterior Discussion * 6.0L Electronics Discussion * 6.0L Ford Excursion Discussion

* 6.0 Tech Files

* Ford Powerstroke 99-03 7.3L Forums * 99-03 7.3L General Discussion * 99-03 7.3L Performance Parts * 99-03 7.3L Powerstroke Problems * 99-03 7.3L Powerstroke Interior Discussion * 99-03 7.3L Exterior Discussion * 99-03 Ford Excursion Forum * 99-03 7.3 Tech Files * Ford Powerstroke 94-98 7.3L Forums * 94-98 7.3L General Powerstroke Discussion * 94-98 7.3L Performance Parts * 94-98 7.3L Problem Forum * 94-98 7.3L Interior Discussion * 94-98 7.3L Exterior Discussion * 94-99 7.3 Tech Files

* Tech Files

* General Tech, Maintenance, and Mod info

* Product Write-ups

* Member repair write-ups * Pre-Powerstroke Diesel Section * Non-Powerstroke General Discussion

* 6.9L IDI Diesels

* 7.3L IDI (Non-Powerstroke) Diesels

* Events & Rallies

* Events And Rallies by Region * Powerstroke.org Meet and Greets and Wrenching Days * Vendor Member Section

* CJC Off Road

* Request A Price Quote * DalesSuperStore.com

* 8 Lug Truck Gear

* Autonation Ford WBL

* Baja Designs

* BulletProofDiesel.com

* CARiD.com

* CNC Fabrication, LLC

* Diode Dynamics

* Discount Tire

* HIDExtra

* InjectorsDirect.com * Precision Metal Fab

* Rancho Shocks

* RealTruck.com

* RockAuto

* South Bend Clutch

* Strictly Diesel

* Synthetic Motorsports * Xtreme Diesel Performance * Advanced Flow Engineering

* Zone Offroad

* BDS Suspension

* Bob Schwartz Chrysler Dodge Jeep Ram

* Vendor Jungle

* Dieselsite Inc

* Community Help Section * Website Comments, Suggestions and Announcements

* Off Topic Section

* Off-Topic

* Forums by State (Hometown Forums)

* Hometown America

* Hometown International

* Hometown Canada

* CHAPTERS

* Active Topics

* Today's Posts

* Gallery

* Garage

* Insurance

*

* Register

OR Remember Me?

Community Links

Pictures & Albums

User Tagging Statistics Hash Tag Subscriptions

Search Forums

Show Threads   Show Posts

Tag Search

Advanced Search

Google Search

×

search

Find All Thanked Posts

Go to Page...

FORD POWERSTROKE FORUM

*

DEC 19 ROTM WINNER

14

NOV 19 ROTM WINNER

December 01, 2019 - 01:45 PM - by Heavy_GD @zsargent This month's ROTM sponsor is brought to you by:

OCT 19 ROTM WINNER

November 05, 2019 - 05:35 AM - by Heavy_GD

9

@DesertDiesel This month's ROTM sponsor is brought to you by:

>> Read More

MOST POPULAR DISCUSSIONS

22

Temp gauge and pcm temp reads way too low. 01-05-2020 08:39 PM by Bramstroker

4

06 batteries draining in cold 01-16-2020 04:07 PM by RFOneWatt

34

Buying truck that has emissions system bypassed 01-17-2020 12:35 PM by 18M_RWR

29

Runaway, due to neglect 01-17-2020 02:18 AM by 2002F3504X4

9

Fuel Filter Replacement I've done extensive research. Please help. Yesterday 02:18 PM by Jstahley

8

Why 03-07, what about an 08. Yesterday 02:37 PM by kcoyner

9

Diesel shut off going down the road Yesterday 07:26 PM by Hydro

18

Price to replace fuel injectors? Yesterday 11:26 AM by sixgear

22

DPF delete in tx 2019 law? 01-01-2020 01:38 PM by rcg270

7

03-e04 Air Filter Assembly vs later model; K&N Yesterday 05:01 AM by G8orFord

25

Best fuel additive for a 7.3L 01-16-2020 06:59 AM by Bart_3500

8

KC turbo wastegate setting? Yesterday 06:54 AM by 02_7.three

8

Tune left over from previous owner? 01-17-2020 04:04 PM by Turbo2

44

'06 no start appear to have ICP, ficm V/sync Yesterday 05:16 PM by Joshua Billman

10

Please help identify this part and problem 01-17-2020 06:46 PM by ZMANN

3

Is the 6.0 deleted?

Yesterday 04:39 PM by jokester00

1

Custom Ball Bearing turbo on my 7.3 01-17-2020 02:12 PM by CloverLeafFarm

17

New Head Unit Install - and the fun ensues.... 01-17-2020 12:47 PM by AZsilver03cobra

10

Ficmrepair.com Atlas 40 Yesterday 03:28 PM by kcoyner

106

6.0 NO START

12-23-2019 03:45 PM by JoeyJ

*

Google search

*

VB search

×

search

HOT DEALS

DEWALT

/ Plenty of DEWALT tools are on sale during Amazon Prime Day 2019.

View Deal

RACECHIP USA

/

Save $100 on RaceChip's GTS and GTS Black Premium Chips

View Deal

TIRE RACK

/

Get up to $70 back on a brand new set of tires from Tire Rack!

View Deal

CRAFTSMAN

/ Get a Craftsman Low-Profile Floor Jack for Just $49.99

View Deal

JEGS

/ Save 10% on JEGS via eBay for a limited time!

View Deal

PREMIUM VENDOR SHOWCASE

CARID

Access Adarac Bed Rack System

Bull

Bars Ford F350 Offroad Bumper

Contact CARiD REP

on the

forum to get a discount on FORD TRUCK parts

RECENT DISCUSSIONS

4k

216 Attachment(s) :) I would like to thank everyone who helped out with the creation of this chapter! A big thanks to Rattlesnake18 for approving everything even though we had to sneak CrazyS0b by him. :hehe:" itemprop="headline">Midwest Chat Thread Today 08:29 AM by jrcowboy

0

diesel engine oil flush Today 08:20 AM by royrob

270

1336 Attachment(s) FORScan App Today 08:17 AM by ehagerty

2

2020 7.3

Today 07:31 AM by Spirit

1

Intermittent Turbo... Today 05:47 AM by 7.3_TurboDiesel

5

Transgo

Today 04:44 AM by nglett

43

49 Attachment(s) Rotella T6 3 gallons... Today 03:31 AM by ehagerty

3

3 Attachment(s) Ongoing Thread: New to... Today 03:26 AM by No_Dude

3

1 Attachment(s) Valve cover removal Today 02:24 AM by Larry1013

1

What Delete For 2015 or... Yesterday 09:27 PM by Nickjames525 -- Powerstroke.org (Full) -- Powerstroke.org (Classic I) -- Powerstroke.org (Classic II) -- Powerstroke.org (Mobile) CONTACT US |ADVERTISE | FORD POWERSTROKE FORUM | ARCHIVE

| TOP

For the best viewing experience please update your browser to Google

Chrome

TERMS OF USE

COPYRIGHT

PRIVACY POLICY