Are you over 18 and want to see adult content?
More Annotations
A complete backup of causeofaction.org
Are you over 18 and want to see adult content?
A complete backup of hammerinternational.com
Are you over 18 and want to see adult content?
A complete backup of terryjohnsonsflamingos.com
Are you over 18 and want to see adult content?
Favourite Annotations
A complete backup of formacionyempleo.site
Are you over 18 and want to see adult content?
A complete backup of scottishmountaingear.com
Are you over 18 and want to see adult content?
A complete backup of latavolalinen.com
Are you over 18 and want to see adult content?
A complete backup of celebritybuzzer.org
Are you over 18 and want to see adult content?
A complete backup of linguistsoftware.com
Are you over 18 and want to see adult content?
Text
GLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forGLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least for COVID-19 CORONA TRACKER: ESP32 & ARDUINO IDE COVID-19 CORONA Tracker ESP32 & Arduino IDE – M5StickC M5StickC and the Arduino IDE. First of all, we need an ESP32-compatible development board with LCD, such as the M5StickC.You can, of course, use a different ESP32, as long as you adjust the sketch. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
AUTOPILOT FOR BLACKMAGIC DESIGN ATEM SWITCHER This project is a simple autopilot for Atem video switchers from Blackmagic Design.It is just like the previous project “Tally light ESP32 for Blackmagic ATEM switcher” based on the ESP32 microcontroller.Also for this autopilot, we again use the M5StickC development module (from VNGsystems) that we program with the Arduino IDE, but you can of course use any other ESP32 GOOGLE CHROME BROWSER KIOSK MODE ON LINUX MINT Google Chrome Browser Kiosk mode on Linux Mint – In Use Install Linux Mint. Go to the website of Linux Mint and download the edition of your choice, for example, the 64-bit Cinnamon. At the time of writing, Linux Mint 19.3 “Tricia” – Cinnamon (64-bit) was the current version. Write the ISO to a USB drive, boot the computer from USB and wait until the Linux Mint desktop appears. SDRSHARP COMMUNITY PLUGIN PACKAGE INSTALL In earlier blogs, you could read how to install SDR# on a computer with Windows Vista or Windows 7.This was followed by a blog about how to install SDRSharp (SDR#) on Windows 10.The newer versions are now much easier to install. That is why we look at the “Community Plugin Package” in this blog: a package that not only installs SDR# and the required drivers but also a large number of ARDUINO HALLOWEEN MP3 SOUNDBOARD Arduino Halloween MP3 Soundboard: breadboard view. You connect the keypad to the digital pins of the Arduino according to the table below. Pin 1 of the keypad is the left pin on the connector (the keypad with the printed side up, as in the pictures). LILYGO TTGO T-JOURNAL: ESP32 + OV2640 CAMERA The LILYGO TTGO T-Journal is one of the new ESP32 development boards with a built-in 2-megapixel camera module. In addition to the camera, WiFi and Bluetooth, this board also has a number of interesting features. On the board you will also find an OLED screen, USB to serial interface, GPIOs and connections for a 3.7V lithium battery and external (SMA or U.FL) antenna. WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forONE GUY, ONE BLOG
LilyGO TTGO T-Display: ESP32 with TFT LCD. oneguyoneblog | 28 September 2020. Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. SDRSHARP COMMUNITY PLUGIN PACKAGE INSTALL In earlier blogs, you could read how to install SDR# on a computer with Windows Vista or Windows 7.This was followed by a blog about how to install SDRSharp (SDR#) on Windows 10.The newer versions are now much easier to install. That is why we look at the “Community Plugin Package” in this blog: a package that not only installs SDR# and the required drivers but also a large number of WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forONE GUY, ONE BLOG
LilyGO TTGO T-Display: ESP32 with TFT LCD. oneguyoneblog | 28 September 2020. Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. SDRSHARP COMMUNITY PLUGIN PACKAGE INSTALL In earlier blogs, you could read how to install SDR# on a computer with Windows Vista or Windows 7.This was followed by a blog about how to install SDRSharp (SDR#) on Windows 10.The newer versions are now much easier to install. That is why we look at the “Community Plugin Package” in this blog: a package that not only installs SDR# and the required drivers but also a large number of WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forONE GUY, ONE BLOG
LilyGO TTGO T-Display: ESP32 with TFT LCD. oneguyoneblog | 28 September 2020. Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at. COVID-19 CORONA TRACKER: ESP32 & ARDUINO IDE COVID-19 CORONA Tracker ESP32 & Arduino IDE – M5StickC M5StickC and the Arduino IDE. First of all, we need an ESP32-compatible development board with LCD, such as the M5StickC.You can, of course, use a different ESP32, as long as you adjust the sketch. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
MAX7219 AND ARDUINO: INTERACTIVE SCROLLING LED TEXT MAX7219 and Arduino: interactive scrolling LED text. It’s easy to make a scrolling text ticker with an Arduino Uno and multiple MAX7219 8×8 LED matrix modules. Just 5 connections between the Arduino and the first module are required: 3 for data and 2 for power. Multiple modules can be daisychained. Depending on the power available you can GEEKCREIT UNO, INSTALLING ARDUINO IDE ON LINUX MINT sudo apt-get install arduino. This will download and install the IDE and all the components it requires, like Java. After this the IDE will be listed in Mint’s main menu under ‘Development’. Arduino IDE in Linux Mint main menu. Go ahead and start the IDE from Mint’s main menu. This will bring up the “Arduino Permission Checker”. IOT SERVER: MOSQUITTO AND NODE RED ON RASPBERRY PI Start the configuration tool ‘raspi-config’: sudo raspi-config. Mosquitto and Node Red on Raspberry Pi: screenshot of raspi-config. Change the username and password. Change the hostname. Go to ‘interfacing options’ > ‘SSH’ and enable SSH. Enabe I2C and SPI if you want to use the GPIO pins. REUSE LCD SCREENS WITH THE V56 UNIVERSAL CONTROLLER Then make all the new connections: Connect the LVDS cable to the LCD screen and the V56 board, make sure the red wires line op with pin number 1 (indicated by a ‘1’ or triangle) Connect the new inverter to the LCD screen and the inverter power cable to the V56 board. Connect the button control panel/IR sensor cable to the V56 board. USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
NVIDIA GEFORCE GT 710 ON LINUX MINT The Geforce GT 710 works fine on Mint without installing drivers. If you still want the native NVIDIA drivers, you can install those quickly with a few simple commands. First, you need to add the driver-PPA (personal package archive) to your system using the command: sudo add-apt-repository ppa:graphics-drivers/ppa. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. LILYGO TTGO T-DISPLAY: ESP32 WITH TFT LCD Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at the LilyGO TTGO T-Display. On this board, the ESP32 is combined with a 240×135 pixel IPS TFT display and a 3.7V battery charging circuit. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least for NVIDIA GEFORCE GT 710 ON LINUX MINT The Geforce GT 710 works fine on Mint without installing drivers. If you still want the native NVIDIA drivers, you can install those quickly with a few simple commands. First, you need to add the driver-PPA (personal package archive) to your system using the command: sudo add-apt-repository ppa:graphics-drivers/ppa. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. LILYGO TTGO T-DISPLAY: ESP32 WITH TFT LCD Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at the LilyGO TTGO T-Display. On this board, the ESP32 is combined with a 240×135 pixel IPS TFT display and a 3.7V battery charging circuit. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least for NVIDIA GEFORCE GT 710 ON LINUX MINT The Geforce GT 710 works fine on Mint without installing drivers. If you still want the native NVIDIA drivers, you can install those quickly with a few simple commands. First, you need to add the driver-PPA (personal package archive) to your system using the command: sudo add-apt-repository ppa:graphics-drivers/ppa.ONE GUY, ONE BLOG
LilyGO TTGO T-Display: ESP32 with TFT LCD. oneguyoneblog | 28 September 2020. Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at. COVID-19 CORONA TRACKER: ESP32 & ARDUINO IDE COVID-19 CORONA Tracker ESP32 & Arduino IDE – M5StickC M5StickC and the Arduino IDE. First of all, we need an ESP32-compatible development board with LCD, such as the M5StickC.You can, of course, use a different ESP32, as long as you adjust the sketch. LILYGO TTGO T-DISPLAY: ESP32 WITH TFT LCD Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal.In this blog, we look at the LilyGO TTGO T-Display. On this board, the ESP32 is combined with a 240×135 pixel IPS TFT display and a 3.7V battery charging circuit. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
MAX7219 AND ARDUINO: INTERACTIVE SCROLLING LED TEXT MAX7219 and Arduino: interactive scrolling LED text. It’s easy to make a scrolling text ticker with an Arduino Uno and multiple MAX7219 8×8 LED matrix modules. Just 5 connections between the Arduino and the first module are required: 3 for data and 2 for power. Multiple modules can be daisychained. Depending on the power available you can IOT SERVER: MOSQUITTO AND NODE RED ON RASPBERRY PI Start the configuration tool ‘raspi-config’: sudo raspi-config. Mosquitto and Node Red on Raspberry Pi: screenshot of raspi-config. Change the username and password. Change the hostname. Go to ‘interfacing options’ > ‘SSH’ and enable SSH. Enabe I2C and SPI if you want to use the GPIO pins. GEEKCREIT UNO, INSTALLING ARDUINO IDE ON LINUX MINT sudo apt-get install arduino. This will download and install the IDE and all the components it requires, like Java. After this the IDE will be listed in Mint’s main menu under ‘Development’. Arduino IDE in Linux Mint main menu. Go ahead and start the IDE from Mint’s main menu. This will bring up the “Arduino Permission Checker”. REUSE LCD SCREENS WITH THE V56 UNIVERSAL CONTROLLER Then make all the new connections: Connect the LVDS cable to the LCD screen and the V56 board, make sure the red wires line op with pin number 1 (indicated by a ‘1’ or triangle) Connect the new inverter to the LCD screen and the inverter power cable to the V56 board. Connect the button control panel/IR sensor cable to the V56 board. NVIDIA GEFORCE GT 710 ON LINUX MINT The Geforce GT 710 works fine on Mint without installing drivers. If you still want the native NVIDIA drivers, you can install those quickly with a few simple commands. First, you need to add the driver-PPA (personal package archive) to your system using the command: sudo add-apt-repository ppa:graphics-drivers/ppa.GLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
GLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
COVID-19 CORONA TRACKER: ESP32 & ARDUINO IDE COVID-19 CORONA Tracker ESP32 & Arduino IDE – M5StickC M5StickC and the Arduino IDE. First of all, we need an ESP32-compatible development board with LCD, such as the M5StickC.You can, of course, use a different ESP32, as long as you adjust the sketch. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
LILYGO TTGO T-DISPLAY: ESP32 WITH TFT LCD Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at the LilyGO TTGO T-Display. On this board, the ESP32 is combined with a 240×135 pixel IPS TFT display and a 3.7V battery charging circuit. REUSE LCD SCREENS WITH THE V56 UNIVERSAL CONTROLLER Then make all the new connections: Connect the LVDS cable to the LCD screen and the V56 board, make sure the red wires line op with pin number 1 (indicated by a ‘1’ or triangle) Connect the new inverter to the LCD screen and the inverter power cable to the V56 board. Connect the button control panel/IR sensor cable to the V56 board. ARDUINO HALLOWEEN MP3 SOUNDBOARD Arduino Halloween MP3 Soundboard: breadboard view. You connect the keypad to the digital pins of the Arduino according to the table below. Pin 1 of the keypad is the left pin on the connector (the keypad with the printed side up, as in the pictures). WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
V56 UNIVERSAL LCD TV CONTROLLER BOARD FIRMWARE File Size 390.83 MB. Create Date 23 October 2019. Download. The original firmware collection for the V56 Universal LCD TV Controller Driver Board. Instructions on using the firmware can be found in the blog post: " Reuse LCD screens with the V56 Universal Controller ". I mirrored the file here because the original page on the Banggoodwebsite
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forGLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
GLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
COVID-19 CORONA TRACKER: ESP32 & ARDUINO IDE COVID-19 CORONA Tracker ESP32 & Arduino IDE – M5StickC M5StickC and the Arduino IDE. First of all, we need an ESP32-compatible development board with LCD, such as the M5StickC.You can, of course, use a different ESP32, as long as you adjust the sketch. PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also M5STICKC PLUS FROM M5STACK WITH THE ARDUINO IDE M5stickC Plus vs M5StickC. The screen of the new module is larger (1.14 “, instead of 0.96”) and has a higher resolution (135×240 pixels instead of 80×160). The new battery has 40 mAh more capacity and a buzzer is now also built-in. Furthermore, the HAT port has an extra GPIO pin (G25), there are 2 additional mounting holes at theback.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
LILYGO TTGO T-DISPLAY: ESP32 WITH TFT LCD Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at the LilyGO TTGO T-Display. On this board, the ESP32 is combined with a 240×135 pixel IPS TFT display and a 3.7V battery charging circuit. REUSE LCD SCREENS WITH THE V56 UNIVERSAL CONTROLLER Then make all the new connections: Connect the LVDS cable to the LCD screen and the V56 board, make sure the red wires line op with pin number 1 (indicated by a ‘1’ or triangle) Connect the new inverter to the LCD screen and the inverter power cable to the V56 board. Connect the button control panel/IR sensor cable to the V56 board. ARDUINO HALLOWEEN MP3 SOUNDBOARD Arduino Halloween MP3 Soundboard: breadboard view. You connect the keypad to the digital pins of the Arduino according to the table below. Pin 1 of the keypad is the left pin on the connector (the keypad with the printed side up, as in the pictures). WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
V56 UNIVERSAL LCD TV CONTROLLER BOARD FIRMWARE File Size 390.83 MB. Create Date 23 October 2019. Download. The original firmware collection for the V56 Universal LCD TV Controller Driver Board. Instructions on using the firmware can be found in the blog post: " Reuse LCD screens with the V56 Universal Controller ". I mirrored the file here because the original page on the Banggoodwebsite
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forGLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
GOOGLE CHROME BROWSER KIOSK MODE ON LINUX MINT Google Chrome Browser Kiosk mode on Linux Mint – In Use Install Linux Mint. Go to the website of Linux Mint and download the edition of your choice, for example, the 64-bit Cinnamon. At the time of writing, Linux Mint 19.3 “Tricia” – Cinnamon (64-bit) was the current version. Write the ISO to a USB drive, boot the computer from USB and wait until the Linux Mint desktop appears. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forGLEDIATOR V2.0.3
Download 13673. File Size 1.27 MB. Create Date 26 November 2018. Download. LED Matrix Control Software. Glediator stands for Graphical LED Installation AnimaTOR and is a small piece of software to control led matrix and led stripe installations. Source: Solderlab. SDRSHARP (SDR#): INSTALLING ON WINDOWS 10 A step by step guide on installing SDRSharp (SDR#) on a PC running Windows 10. SDR Sharp is a popular and free software package for Software Defined Radio. TASMOTA ON ESP8266 NODEMCU WITH ARDUINO IDE In the Tasmota interface, go to Configuration and then Configure Module. Make sure all the GPIOs are set to “None”. Then set GPIO16 to “ Relay1i “. Hit “Save” and return to the Main Menu. Tasmota on ESP8266-NodeMCU with Arduino IDE: GPIO configuration. At the top of the Main Menu, you will see a button labeled “Toggle”. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
ESP32-CAM: ESP32 WITH CAMERA AND SD CARD SLOT ESP32-CAM: ESP32 with camera and SD card slot. The name says it all: the ESP32-CAM is a WiFi / Bluetooth development board with both an ESP32 microcontroller and a camera. There are also a number of GPIOs available and there is a connection for an external antenna. With that, the board looks a bit like the TTGO T-Journal from Lilygo, butthere
GOOGLE CHROME BROWSER KIOSK MODE ON LINUX MINT Google Chrome Browser Kiosk mode on Linux Mint – In Use Install Linux Mint. Go to the website of Linux Mint and download the edition of your choice, for example, the 64-bit Cinnamon. At the time of writing, Linux Mint 19.3 “Tricia” – Cinnamon (64-bit) was the current version. Write the ISO to a USB drive, boot the computer from USB and wait until the Linux Mint desktop appears. SDRSHARP (SDR#): INSTALLING ON WINDOWS 7/VISTA A guide on installing SDRSharp (SDR#) on Windows 7 or Windows Vista. SDR Sharp is a popular and free software package for Software DefinedRadio.
USING BAOFENG UV-5R AS A RADIO SCANNER WITH CHIRP Using Baofeng Pofung UV-5R as a radio scanner with CHIRP – Memories tab. Loc – Yep, it’s the memory location (ranging from 0 to 127).; Frequency – You guessed it right, it’s the frequency (9 digits: xxx.xxxxxx).; Name – Alpha tag (7 characters). The custom name that you can give this channel, it will be visible in the LCD display whenset.
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
INSTALL CHIRP FOR BAOFENG UV-5R ON LINUX OR WIN10 Install CHIRP for Baofeng UV-5R on Windows 10 and Linux- USB to serial programming cable USB programming cable. For connecting the radio to the PC I used this generic, cheap Kenwood-style serial cable.It came without any drivers, and at least forONE GUY, ONE BLOG
LilyGO TTGO T-Display: ESP32 with TFT LCD. oneguyoneblog | 28 September 2020. Development boards with ESP32 microcontrollers come in countless variants today. For example, we already looked at the M5StickC, ESP32-CAM, and TTGO T-Journal. In this blog, we look at. SONOFF BASIC R3: UPDATED SMART SWITCH The Sonoff Basic R3 is a WiFi-controlled switch for IoT applications. You can make “stupid” devices “smart” with it. It can be controlled with the eWeLink app for Android or iOS. This switch is also compatible with Amazon Alexa, Google Assistant, and IFTTT. If you want to know more about the connection and control with the eWeLinkapp
PROGRAMMING THE M5STICKC WITH THE ARDUINO IDE The M5StickC is a mini version of the M5Stack and also based on the ESP32 microcontroller.It is a user-friendly and open-source IoT development board. The M5StickC programming is possible with UIFlow, MicroPython and of course the Arduino IDE.There are countless extensions available that are easy to connect to the Grove or HAT ports. In addition, you can of course also WIFI JAMMING: JAM WIRELESS NETWORKS WITH KALI LINUX Requirements and procedure. For WiFi jamming you will need a computer running Kali Linux, and a wireless interface which is capable of operating in monitor mode and can do packet injection. I will be using the TP-Link TL-WN722N 150Mbps High Gain Wireless USB Adapter , which is cheap and powerful. TP-Link TL-WN722N High Gain Wireless USBAdapter
FULCRUM MINIBOT 1.0: SMALL, EDUCATIONAL 3D PRINTER Fulcrum Minibot 1.0: Small is beautiful. The printer lives up to its name and is really mini: only 22.00 x 21.00 x 21.00 cm (H x W x D) and weighs 3.5 kilograms. The black and white housing with rounded corners is made of ABS. Transparent panels close off the left and right sides. The maximum dimensions of the objects that you can print with it EC1515B V3 MANUAL: FUNCTIONS AND SETTINGS EC1515B v3 manual. The clock has two buttons on the back. The left is the MODE button and the right is the PLUS. Usually, you select the setting you want to change with MODE and change the value of that setting with PLUS. The clock has 4 modes: Time display (standard mode, from this you go to the other 3 modes). Time settings (press MODEbriefly).
SDRSHARP COMMUNITY PLUGIN PACKAGE INSTALL In earlier blogs, you could read how to install SDR# on a computer with Windows Vista or Windows 7.This was followed by a blog about how to install SDRSharp (SDR#) on Windows 10.The newer versions are now much easier to install. That is why we look at the “Community Plugin Package” in this blog: a package that not only installs SDR# and the required drivers but also a large number of ARDUINO HALLOWEEN MP3 SOUNDBOARD Arduino Halloween MP3 Soundboard: breadboard view. You connect the keypad to the digital pins of the Arduino according to the table below. Pin 1 of the keypad is the left pin on the connector (the keypad with the printed side up, as in the pictures). REUSE LCD SCREENS WITH THE V56 UNIVERSAL CONTROLLER Then make all the new connections: Connect the LVDS cable to the LCD screen and the V56 board, make sure the red wires line op with pin number 1 (indicated by a ‘1’ or triangle) Connect the new inverter to the LCD screen and the inverter power cable to the V56 board. Connect the button control panel/IR sensor cable to the V56 board. SONOFF BASIC: CHEAP AND HACKABLE DIY WIFI SWITCH Sonoff Basic: cheap and hackable DIY WiFi switch – unboxing. The package contains the switch, manuals in English, German and Chinese, and a bag with screws. With these screws, you can attach the cover caps (which also act as strain relief) to the Basic. The Sonoff that we are reviewing here is the second version of the Basic, the “RF R2Menu
* Home
* Downloads
* Contact
* About
Nederlands Klik deze knop voor de Nederlandstalige website EC1515B v3 manual: functions and settings The previous article describes how you can assemble the EC1515B EC1515B digital clock DIY kit with DS3102 IC Sonoff Basic: cheap and hackable DIY WiFi switch Sonoff S20 Smart Socket: easy home automationLatest
General
EC1515B V3 MANUAL: FUNCTIONS AND SETTINGSoneguyoneblog | 7
May 2019
The previous article describes how you can assemble the EC1515B digital clock DIY kit with DS3102 IC. Unfortunately, there is usually no user manual included. The EC1515B v3 manual Read MoreGeneral
EC1515B DIGITAL CLOCK DIY KIT WITH DS3102 IConeguyoneblog | 16
April 2019
The EC1515B digital clock is a popular building kit for both beginners and advanced hobbyists. For a few euros you not only have a whole afternoon or evening Read More Internet of Things (IoT) SONOFF BASIC: CHEAP AND HACKABLE DIY WIFI SWITCHoneguyoneblog | 8
April 2019
If you think the Sonoff S20 is already an incredibly cheap WiFi switch, then you don’t know the Sonoff Basic yet. For about half the price of an Read More Internet of Things (IoT) SONOFF S20 SMART SOCKET: EASY HOME AUTOMATIONoneguyoneblog | 15
January 2019
The Sonoff S20 WiFi Smart Socket is a switch that you can control with your smartphone. This can be done locally via your own wireless network and worldwide Read MoreESP8266
WIFI JAMMER / DEAUTH ATTACK USING ESP-WROOM-02oneguyoneblog | 6
January 2019
One of the more obvious applications of a board like the ESP-Wroom-02 is using it as “WiFi jammer”. In the previous post I already wrote about the board Read MoreArduino
WEMOS D1 ESP-WROOM-02 AND ARDUINO IDEoneguyoneblog | 28
December 2018
The “WEMOS D1 Esp-Wroom-02” that I got from VNG Systems is another microcontroller development board with an ESP8266 WiFi chip. This board also has an OLED screen, 18650 battery charging Read MorePOSTS NAVIGATION
1 2 3
… 7
Older
* __
* __
* __
* __
* __
* __
* __
__
CATEGORIES
* Android
* Arduino
* ESP32
* ESP8266
* General
* Hacking and security * Internet of Things (IoT)* Linux
* NFC
* Radio
* Raspberry Pi
* RTL-SDR
* Troubleshooting
RECENT COMMENTS
* ken on Solder fun: Geekcreit Christmas Music Box kit * oneguyoneblog on Solder fun: Geekcreit Christmas Music Box kit * oneguyoneblog on Using Baofeng UV-5R as a radio scanner with CHIRPTAGS
ACR122U Adafruit
Android
Arduino
balloon fox hunt
Banggood
Baofeng UV-5R
CHIRP
DealExtreme
DVB-T
ESP8266
frequencies
Geekcreit
Glediator
hacking
Halloween
ham radio
home automation
Internet of Things
(IoT) Java
LCD
LED
Linux
Mint
MP3
MQTT
NeoPixel
NFC
OLED
PMR
radio
Raspberry Pi
Raspbian
registry
RTL-SDR
SDR#
solder
Sonoff
Ubuntu
V56
Vista
VNGSystems
WiFi
Windows
WS2812B
Bahasa Indonesia
Nederlands
Copyright © 2019 One Guy, One Blog .* Home
* Downloads
* Contact
* About
__
WordPress Download Manager - Best Download Management PluginClose
Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use. To find out more, including how to control cookies, see here: CookiePolicy f
Details
Copyright © 2024 ArchiveBay.com. All rights reserved. Terms of Use | Privacy Policy | DMCA | 2021 | Feedback | Advertising | RSS 2.0