MAURY MICROWAVE

Maury Microwave News On-Wafer Large-Signal Transistor Characterization from 70–110 GHz February 15 2021 // Maury Microwave and Teledyne Technologies have co-authored an application note regarding characterizing advanced transistor technologies using high-power high-gamma on-wafer hybrid-active waveguide vector receiver load pull, featured in the February 2021 edition of the Microwave Journal

MAURY BRANDS

Maury Microwave's Test Essentials™ Lab Adapters have been designed for daily use in microwave/RF labs and production facilities and offer one of the industry's best price/performance ratios. Test Essentials™ Lab Adapters feature excellent electrical performance, rugged construction for durability, repeatable mating and high

reliability.

STABILITY PLUS™ MICROWAVE/RF CABLE ASSEMBLIES IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners /

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in TNC CALIBRATION KITS Maury TNC calibration kits are designed for making error-corrected measurements on a wide range of vector network analyzers using precision 50ohm TNC connectors from DC to 18.0 GHz. Each kit includes a full complement of calibration standards and is available with optional in-series adapters. 8650-Series cal kits are available in

SOLT Fixed

PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

PULSED SMU SYSTEMS

Introduction. AMCAD Engineering has created professional, industry-proven pulsing technology for both pulsed-bias load pull (Pulsed Load Pull, PLP) and 50ohm transistor test applications. Systems come equipped with a mainframe controller which includes integrated power supplies and integrated input pulser with ±25V/200mA

capability.

LXI™-CERTIFIED 7MM AUTOMATED TUNERS // JANUARY 2018 LXI™-Certified 7mm Automated Tuners DATA SHEET / 4T-050G02 MODELS: MT982GL01 MT982GL30 MT982BL01 MT982EL30 MT982AL02 TYPE N VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-076 / Rev 2021.1/A A020K 7909D3 7909D4 8829A1 8829B1 2698C2 Type N VNA Calibration Kits 8850CK40/41 SERIES AND 8850CK50/51 SERIES Features > Type N Connectors > DC to 18 GHz > Compatible with Insight calibration SW and uncertainty analysis* BNC VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2-069 A012A 8582D3/D4 2621A1/B1 BNC VNA Calibration Kits 8550CK10 & 8580CK10 MODELS Features > 50Ω or 75Ω BNC Connectors > DC to 10.0 GHz & DC to 12.0 GHz > Simple Fixed Load Calibration > Keysight, Rohde & Schwarz and Anritsu VNAs Supported Calibration Methods Supported > 8550CK10 (50Ω) – Fixed Load SOLT

(DC–10.0 GHz)

MAURY MICROWAVE

Maury Microwave News On-Wafer Large-Signal Transistor Characterization from 70–110 GHz February 15 2021 // Maury Microwave and Teledyne Technologies have co-authored an application note regarding characterizing advanced transistor technologies using high-power high-gamma on-wafer hybrid-active waveguide vector receiver load pull, featured in the February 2021 edition of the Microwave Journal

MAURY BRANDS

Maury Microwave's Test Essentials™ Lab Adapters have been designed for daily use in microwave/RF labs and production facilities and offer one of the industry's best price/performance ratios. Test Essentials™ Lab Adapters feature excellent electrical performance, rugged construction for durability, repeatable mating and high

reliability.

STABILITY PLUS™ MICROWAVE/RF CABLE ASSEMBLIES IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners /

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in TNC CALIBRATION KITS Maury TNC calibration kits are designed for making error-corrected measurements on a wide range of vector network analyzers using precision 50ohm TNC connectors from DC to 18.0 GHz. Each kit includes a full complement of calibration standards and is available with optional in-series adapters. 8650-Series cal kits are available in

SOLT Fixed

PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

PULSED SMU SYSTEMS

Introduction. AMCAD Engineering has created professional, industry-proven pulsing technology for both pulsed-bias load pull (Pulsed Load Pull, PLP) and 50ohm transistor test applications. Systems come equipped with a mainframe controller which includes integrated power supplies and integrated input pulser with ±25V/200mA

capability.

LXI™-CERTIFIED 7MM AUTOMATED TUNERS // JANUARY 2018 LXI™-Certified 7mm Automated Tuners DATA SHEET / 4T-050G02 MODELS: MT982GL01 MT982GL30 MT982BL01 MT982EL30 MT982AL02 TYPE N VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-076 / Rev 2021.1/A A020K 7909D3 7909D4 8829A1 8829B1 2698C2 Type N VNA Calibration Kits 8850CK40/41 SERIES AND 8850CK50/51 SERIES Features > Type N Connectors > DC to 18 GHz > Compatible with Insight calibration SW and uncertainty analysis* BNC VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2-069 A012A 8582D3/D4 2621A1/B1 BNC VNA Calibration Kits 8550CK10 & 8580CK10 MODELS Features > 50Ω or 75Ω BNC Connectors > DC to 10.0 GHz & DC to 12.0 GHz > Simple Fixed Load Calibration > Keysight, Rohde & Schwarz and Anritsu VNAs Supported Calibration Methods Supported > 8550CK10 (50Ω) – Fixed Load SOLT

(DC–10.0 GHz)

MAURY MICROWAVE ONLINE STORE Shop for all your Microwave and Radio Frequency measurement needs. Maury Microwave's online store has over 100 adapters, attenuators, cable assemblies and torque wrenches.

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in

CC-A-SMAN-MM

TW-8 Designed for 1.85mm, 2.4mm, 2.92mm and 3.5mm connectors. Maury's torque wrenches are recommended for tightening coaxial $225.00 each CALIBRATION-GRADE (METROLOGY) ADAPTERS IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners / PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

INSIGHT CALIBRATION AND MEASUREMENT SOFTWARE MT940A Insight Calibration and Measurement software module includes everything needed to calibrate a VNA, validate VNA calibration, measure an RF device’s S-parameters, and visualize and analyze the measurement results. Features of MT940A include: System library. Calibration wizard. Calibration validation wizard. Real-time measurement interface. PRECISION MISMATCHES Precision standard mismatches are fixed coaxial terminations, which are used to introduce a known VSWR into a 50 ohm transmission system. These mismatches are extremely useful in a wide variety of applications and are quick and easy to use. They can be used to calibrate swept reflectometers, verify network analyzer calibration,

establish

SP-292-MM-24

SP-292-MM-24. 2.92mm Male to 2.92mm Male. Stability Plus™ series Microwave/RF Cable Assemblies. Quantity. Quantity Volume Pricing. 1 - 9 $662.00. 10 - 24 $596.00. 25 - 49 $508.00. 50 - 99 $483.00. 2.92MM VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-073 A050A 8719A1 8719B1 7909F3 7909F4 8799A1 2.92mm VNA Calibration Kits 8770CK40/41 SERIES, AND 8770CK50/51 SERIES Features > 2.92mm Connectors > DC to 40 GHz > Compatible with Insight calibration SW and uncertainty analysis* 7MM COAXIAL CALIBRATION KIT 2650-511 (A) 3/15 1 General Information Calibration Kit Description This series of 7mm coaxial calibration kits is designed to provide accurate calibrations of network analyzers in the DC to 18.0 GHz range. Each of these kits includes all the necessary calibration standards and associated

MAURY MICROWAVE

Maury Microwave News On-Wafer Large-Signal Transistor Characterization from 70–110 GHz February 15 2021 // Maury Microwave and Teledyne Technologies have co-authored an application note regarding characterizing advanced transistor technologies using high-power high-gamma on-wafer hybrid-active waveguide vector receiver load pull, featured in the February 2021 edition of the Microwave Journal

MAURY BRANDS

Maury Microwave's Test Essentials™ Lab Adapters have been designed for daily use in microwave/RF labs and production facilities and offer one of the industry's best price/performance ratios. Test Essentials™ Lab Adapters feature excellent electrical performance, rugged construction for durability, repeatable mating and high

reliability.

STABILITY PLUS™ MICROWAVE/RF CABLE ASSEMBLIESMAURY MICROWAVE CORPORATIONMAURY MICROWAVE INCMAURY MICROWAVE LOGOMAURY MICROWAVE CORPMAURY MICROWAVE CATALOG IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners /

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in TNC CALIBRATION KITS Maury TNC calibration kits are designed for making error-corrected measurements on a wide range of vector network analyzers using precision 50ohm TNC connectors from DC to 18.0 GHz. Each kit includes a full complement of calibration standards and is available with optional in-series adapters. 8650-Series cal kits are available in

SOLT Fixed

PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

PULSED SMU SYSTEMS

Introduction. AMCAD Engineering has created professional, industry-proven pulsing technology for both pulsed-bias load pull (Pulsed Load Pull, PLP) and 50ohm transistor test applications. Systems come equipped with a mainframe controller which includes integrated power supplies and integrated input pulser with ±25V/200mA

capability.

LXI™-CERTIFIED 7MM AUTOMATED TUNERS // JANUARY 2018 LXI™-Certified 7mm Automated Tuners DATA SHEET / 4T-050G02 MODELS: MT982GL01 MT982GL30 MT982BL01 MT982EL30 MT982AL02 TYPE N VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-076 / Rev 2021.1/A A020K 7909D3 7909D4 8829A1 8829B1 2698C2 Type N VNA Calibration Kits 8850CK40/41 SERIES AND 8850CK50/51 SERIES Features > Type N Connectors > DC to 18 GHz > Compatible with Insight calibration SW and uncertainty analysis* BNC VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2-069 A012A 8582D3/D4 2621A1/B1 BNC VNA Calibration Kits 8550CK10 & 8580CK10 MODELS Features > 50Ω or 75Ω BNC Connectors > DC to 10.0 GHz & DC to 12.0 GHz > Simple Fixed Load Calibration > Keysight, Rohde & Schwarz and Anritsu VNAs Supported Calibration Methods Supported > 8550CK10 (50Ω) – Fixed Load SOLT

(DC–10.0 GHz)

MAURY MICROWAVE

Maury Microwave News On-Wafer Large-Signal Transistor Characterization from 70–110 GHz February 15 2021 // Maury Microwave and Teledyne Technologies have co-authored an application note regarding characterizing advanced transistor technologies using high-power high-gamma on-wafer hybrid-active waveguide vector receiver load pull, featured in the February 2021 edition of the Microwave Journal

MAURY BRANDS

Maury Microwave's Test Essentials™ Lab Adapters have been designed for daily use in microwave/RF labs and production facilities and offer one of the industry's best price/performance ratios. Test Essentials™ Lab Adapters feature excellent electrical performance, rugged construction for durability, repeatable mating and high

reliability.

STABILITY PLUS™ MICROWAVE/RF CABLE ASSEMBLIESMAURY MICROWAVE CORPORATIONMAURY MICROWAVE INCMAURY MICROWAVE LOGOMAURY MICROWAVE CORPMAURY MICROWAVE CATALOG IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners /

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in TNC CALIBRATION KITS Maury TNC calibration kits are designed for making error-corrected measurements on a wide range of vector network analyzers using precision 50ohm TNC connectors from DC to 18.0 GHz. Each kit includes a full complement of calibration standards and is available with optional in-series adapters. 8650-Series cal kits are available in

SOLT Fixed

PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

PULSED SMU SYSTEMS

Introduction. AMCAD Engineering has created professional, industry-proven pulsing technology for both pulsed-bias load pull (Pulsed Load Pull, PLP) and 50ohm transistor test applications. Systems come equipped with a mainframe controller which includes integrated power supplies and integrated input pulser with ±25V/200mA

capability.

LXI™-CERTIFIED 7MM AUTOMATED TUNERS // JANUARY 2018 LXI™-Certified 7mm Automated Tuners DATA SHEET / 4T-050G02 MODELS: MT982GL01 MT982GL30 MT982BL01 MT982EL30 MT982AL02 TYPE N VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-076 / Rev 2021.1/A A020K 7909D3 7909D4 8829A1 8829B1 2698C2 Type N VNA Calibration Kits 8850CK40/41 SERIES AND 8850CK50/51 SERIES Features > Type N Connectors > DC to 18 GHz > Compatible with Insight calibration SW and uncertainty analysis* BNC VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2-069 A012A 8582D3/D4 2621A1/B1 BNC VNA Calibration Kits 8550CK10 & 8580CK10 MODELS Features > 50Ω or 75Ω BNC Connectors > DC to 10.0 GHz & DC to 12.0 GHz > Simple Fixed Load Calibration > Keysight, Rohde & Schwarz and Anritsu VNAs Supported Calibration Methods Supported > 8550CK10 (50Ω) – Fixed Load SOLT

(DC–10.0 GHz)

MAURY MICROWAVE ONLINE STORE Shop for all your Microwave and Radio Frequency measurement needs. Maury Microwave's online store has over 100 adapters, attenuators, cable assemblies and torque wrenches.

TORQUE WRENCHES

Description. Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in

CC-A-SMAN-MM

TW-8 Designed for 1.85mm, 2.4mm, 2.92mm and 3.5mm connectors. Maury's torque wrenches are recommended for tightening coaxial $225.00 each CALIBRATION-GRADE (METROLOGY) ADAPTERS IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners / PRECISION LOW-LOSS MULTIPLEXERS TP-series triplexers are designed using low-pass, bandpass and high-pass filters and pass bias between the low-frequency (or Fo) port and the common (or DUT) port. Power handling is rated at 100W CW (average) and typical insertion loss is better than 0.5dB between the low-pass (Fo) and common ports. DP- and TP-series multiplexers are

ideal

INSIGHT CALIBRATION AND MEASUREMENT SOFTWARE MT940A Insight Calibration and Measurement software module includes everything needed to calibrate a VNA, validate VNA calibration, measure an RF device’s S-parameters, and visualize and analyze the measurement results. Features of MT940A include: System library. Calibration wizard. Calibration validation wizard. Real-time measurement interface. PRECISION MISMATCHES Precision standard mismatches are fixed coaxial terminations, which are used to introduce a known VSWR into a 50 ohm transmission system. These mismatches are extremely useful in a wide variety of applications and are quick and easy to use. They can be used to calibrate swept reflectometers, verify network analyzer calibration,

establish

SP-292-MM-24

SP-292-MM-24. 2.92mm Male to 2.92mm Male. Stability Plus™ series Microwave/RF Cable Assemblies. Quantity. Quantity Volume Pricing. 1 - 9 $662.00. 10 - 24 $596.00. 25 - 49 $508.00. 50 - 99 $483.00. 2.92MM VNA CALIBRATION KITS 1 MAURYMW.COM / DATA SHEET / 2Z-073 A050A 8719A1 8719B1 7909F3 7909F4 8799A1 2.92mm VNA Calibration Kits 8770CK40/41 SERIES, AND 8770CK50/51 SERIES Features > 2.92mm Connectors > DC to 40 GHz > Compatible with Insight calibration SW and uncertainty analysis* 7MM COAXIAL CALIBRATION KIT 2650-511 (A) 3/15 1 General Information Calibration Kit Description This series of 7mm coaxial calibration kits is designed to provide accurate calibrations of network analyzers in the DC to 18.0 GHz range. Each of these kits includes all the necessary calibration standards and associated Search field Use up and down arrows to select available result. Press enter to go to selected search result. Touch devices users can use touch and swipe gestures.

Contact Us

Shop Online

Search WE’RE OPEN FOR BUSINESS AND HERE TO

SUPPORT YOU!

For updated details click here Characterization Solutions Calibration Solutions Interconnect Solutions Amplifiers Services Application Notes Library

APPLICATIONS

------------------------- High Speed Tuning Vector Receiver Load

Pull Measurements

Large Signal Analysis, Nonlinear VNA Measurements and Behavioral Model Extraction Linear and Nonlinear Compact Modeling Noise Figure / Noise Parameter Measurements Active Load Pull and Hybrid-Active Load Pull Measurements Active Wideband-Impedance Load Pull Measurements for 4G, 5G and WLAN Signals mmW and Sub-THz 50Ω Gain Compression and Active Load Pull Measurements Mobile Phone Testing Under Real-World Conditions Amplifier Stability and Ruggedness Testing

On-Wafer

Production Testing Stability Analysis of Microwave Circuits

PRODUCTS

------------------------- IVCAD Advanced Measurement and Modeling Software (MT930 series)

ATS

Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series)

Automated Tuners /

Impedance Tuners / Load Pull Tuners Manual Tuners / Impedance Tuners Pulsed IV Systems (AM3200-series) Pulsed SMU Systems (AM3100-series) Noise Receiver Modules (MT7553 series) Transistor Test Fixtures (MT964 series) Low Loss Couplers (LLC series) Precision Low-Loss Multiplexers (DP/TP series) High-Power Low-Loss Pulsed Bias Tees (MBT series) High-Resolution Current Probes (AVCP series) -------------------------

PRODUCTS

------------------------- Insight Calibration & Measurement Software VNA Calibration Kits

Verification Kits

Coaxial Calibration Standards Waveguide Calibration Standards Calibration-Grade (Metrology) Adapters VNA Test Port Cable Assemblies

Metrology Torque

Wrenches Connector Gage Kits Noise Calibration Systems and

Accessories

Stub Tuners

SERVICES

------------------------- VNA Cal Kit Verification and Calibration

Torque Wrench

Calibration Warranty &

Service

-------------------------

PRODUCTS

------------------------- Calibration-Grade (Metrology) Adapters ColorConnect™ Precision Adapters

Test Essentials™

Lab Adapters

Quick Test Push-On Adapters

VNA Test Port Cable

Assemblies

StabilityPlus™ Microwave/RF Cable Assemblies StabilityPlus™ Low Profile Microwave/RF Cable Assemblies

StabilityBench™

Microwave/RF Cable Assemblies

Attenuators

TW-series Torque Wrenches

Connector Gage Kits

-------------------------

SERVICES

------------------------- System Integration Services Measurement Services Rental, Lease, Finance Services VNA Cal Kit Calibration

Torque Wrench

Calibration Warranty

Service

------------------------- BEST-IN-CLASS SOLUTIONS WITH MAURY MICROWAVE WE COMPLETE YOUR LAB! MAURY MICROWAVE NEWS

COVID-19 UPDATE

March 24 2020 // MAURY MICROWAVE will remain open and operating to support your critical business needs MAURY MICROWAVE NEWS FREQUENCY SCALABLE POWER CONTROL AND ACTIVE TUNING FOR SUB-THZ LARGE

SIGNAL MEASUREMENTS

February 14 2020 // Our friends at Vertigo Technologies have written a great Technical Feature on high-resolution power control and active load pull at mmW and sub-THz frequencies, featured in the February 2020 edition of the Microwave Journal MAURY MICROWAVE UPCOMING EVENTS IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM 2020 June 21-26, 2020 // Los Angeles Convention Center • Los Angeles •

CA

MAURY MICROWAVE UPCOMING EVENTS 95TH ARFTG MICROWAVE MEASUREMENT SYMPOSIUM June 26, 2020 // TBD • Los Angeles • CA

PRODUCTS & SERVICES

Characterization Solutions Calibration Solutions Interconnect Solutions Amplifiers Services Adapter Finder Cal Kit Explorer

COMPANY INFO

About Us Policies

Careers

Strategic Alliances Industry

Partners

SUPPORT

Product Catalogs Application Notes

Technical Support

Software Download Site

VNA Cal Kit Files

GET IN TOUCH

Contact Us Price & Delivery Information

Find A Sales Rep

Events

PRODUCTS & SERVICES

MW & RF Device Characterization Solutions Precision Calibration Solutions Interconnect Solutions Test & Measurement Instrument Amplifiers Services Interactive Adapter Finder Coaxial & Waveguide VNA

Calibration Kits

COMPANY INFO

About Maury Microwave Corporate Policies Maury Microwave Careers Strategic Alliances In The Test & Measurement

Industry

SUPPORT

Maury Microwave Corporation Product Catalogs Maury Microwave Application Notes Library

Technical Support

Maury Microwave Software Download Site

VNA Cal Kit Files

GET IN TOUCH

Contact Maury Microwave Price & Delivery Information Request Form Find Your Local Maury Sales Rep Maury Microwave Events Copyright © 2020 - Maury Microwave Corporation. All rights reserved. Quick Link: Application Notes & Data Sheets