INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. BREATH ALCOHOL TRAINING INFORMATION Intoximeters Training Academy Classroom and Online Courses. Intoximeters Training Academy is the industry’s most trusted provider of breath alcohol technician (BAT) training courses, for workplace breath testing as well as for law enforcement alcohol testing. We offer in-person classroom courses and convenient online

courses.

DRY GAS STANDARD

Dry Gas Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators should be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST. ALCO-SENSOR FST BREATH ALCOHOL TESTER Alco-Sensor FST. The Alco-Sensor FST is the industry standard for Preliminary Breath Testing (PBT) instruments. This evidential grade direct breath alcohol tester produces precise, accurate, and repeatable results. It also offers a simple passive breath tester procedure for fast screening of multiple subjects, as well as the

capacity to

ALCO-SENSOR IV CALIBRATION PROCEDURE Alco-Sensor IV Calibration Procedure Part 3. 1) To begin the Calibration, gently press Switch #1 and hold it down with calibration tool.2) While the calibration tool is pressed in Switch #1, insert the mouthpiece. Inserting the mouthpiece turns the unit ON. Four red squares should appear on the display. ALCO-SENSOR III BREATH ALCOHOL TESTER Alco-Sensor. III. Rated 5.00 out of 5 based on 1 customer rating. ( 1 customer review) Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol

concentration.

ALCO-SENSOR FST CALIBRATION PROCEDURE Purge the dry gas regulator for several seconds. Alco-Sensor FST Calibration Procedure Part 2. 1) Attach a new mouthpiece then press and hold the OFF button while simultaneously pressing the ON button. 2) The display should show the rcL message (this is the first option in the function Menu) TRAINING - INTOXIMETERS TRAINING ACADEMY There is no excerpt because this is a protected post.

INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. BREATH ALCOHOL TRAINING INFORMATION Intoximeters Training Academy Classroom and Online Courses. Intoximeters Training Academy is the industry’s most trusted provider of breath alcohol technician (BAT) training courses, for workplace breath testing as well as for law enforcement alcohol testing. We offer in-person classroom courses and convenient online

courses.

DRY GAS STANDARD

Dry Gas Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators should be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST.

TECHNICAL FAQ

Intoximeters guarantees a minimum of twenty months for 108 liter, 55 liter, and 30 liter gas tanks. The Maritime sets are certified for five (5) years. After the expiration date, the manufacturer can no longer guarantee that the gas value will remain stable. Categories: Dry Gas Tanks, Technical. a. CONTACT INTOXIMETERS If you have any questions about our breath alcohol testing instruments, our training programs, or just want to make a comment, contact Intoximeters today. MARITIME U.S. COAST GUARD BREATH ALCOHOL TESTING Intoximeters, Inc. has been supplying breath alcohol detection systems to the maritime industry for more than 15 years. We understand many of the issues with regard to alcohol testing at sea. In order to offer the best value, we have a line of evidential breath alcohol testing systems that address many concerns that we have seen in this market. ALCO-SENSOR III BREATH ALCOHOL TESTER Alco-Sensor. III. Rated 5.00 out of 5 based on 1 customer rating. ( 1 customer review) Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol

concentration.

INTOXNET 6 BREATH ALCOHOL INSTRUMENT SOFTWARE IntoxNet 6 (version 6.x) IntoxNet centrally supports a network of Intoximeters instruments. The software facilitates test result transfer to a central, localized database for easy queries and reporting of multiple instruments. IntoxNet supports many of our instruments, including Alco-Sensor IV @Work, RBT IV, Alco-Sensor VXL,

Alcomonitor CC, and

ALCO-SENSOR IV HANDHELD BREATH ALCOHOL TESTER The Alco-Sensor IV is an evidential grade handheld breath alcohol tester, providing a simple, accurate and economical method of determining a subject’s breath alcohol concentration with evidential grade accuracy. It is the most widely used breath testing instrument today. ×. Send Quote for Alco-Sensor ® IV.

WET BATH STANDARD

Wet Bath Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators would be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

INTOX ECIR II: DESKTOP EVIDENTIAL BREATH ALCOHOL TESTING The Intox EC/IR II is a bench-top instrument featuring fuel cell integration analysis combined with real-time analytical advantages of infrared technology. Thank You! The sampling system in the Intox EC/IR II utilizes advantages of both electrochemical sensor (EC) and infrared sensor (IR) technology. The Infrared system is capable of

monitoring

ALCO-SENSOR VXL CALIBRATION PROCEDURE Alco-Sensor VXL Calibration Procedure Part 1. Check the temperature of the ASVXL — it must be within a specified range in order to perform the calibration. You can quickly check the temperature of your instrument by turning it on with the yellow trigger button and observing the status bar at FST OPERATOR ENROLLMENT ALCO-SENSOR FST OPERATOR ENROLLMENT. Looking for Group Training for your Organization? Contact Intoximeters at training@intox.com to get

Group Training set

INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. BREATH ALCOHOL TRAINING INFORMATION Intoximeters Training Academy Classroom and Online Courses. Intoximeters Training Academy is the industry’s most trusted provider of breath alcohol technician (BAT) training courses, for workplace breath testing as well as for law enforcement alcohol testing. We offer in-person classroom courses and convenient online

courses.

DRY GAS STANDARD

Dry Gas Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators should be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST. ALCO-SENSOR FST BREATH ALCOHOL TESTER Alco-Sensor FST. The Alco-Sensor FST is the industry standard for Preliminary Breath Testing (PBT) instruments. This evidential grade direct breath alcohol tester produces precise, accurate, and repeatable results. It also offers a simple passive breath tester procedure for fast screening of multiple subjects, as well as the

capacity to

ALCO-SENSOR IV CALIBRATION PROCEDURE Alco-Sensor IV Calibration Procedure Part 3. 1) To begin the Calibration, gently press Switch #1 and hold it down with calibration tool.2) While the calibration tool is pressed in Switch #1, insert the mouthpiece. Inserting the mouthpiece turns the unit ON. Four red squares should appear on the display. ALCO-SENSOR III BREATH ALCOHOL TESTER Alco-Sensor. III. Rated 5.00 out of 5 based on 1 customer rating. ( 1 customer review) Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol

concentration.

ALCO-SENSOR VXL CALIBRATION PROCEDURE Alco-Sensor VXL Calibration Procedure Part 3. The ASVXL will prompt you to connect the mouthpiece to the dry gas tank. Press the button on the regulator to provide the standard gas sample to the instrument for analysis. The instrument will detect the flow of gas and then draw an

automatic sample.

TRAINING - INTOXIMETERS TRAINING ACADEMY There is no excerpt because this is a protected post.

INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. BREATH ALCOHOL TRAINING INFORMATION Intoximeters Training Academy Classroom and Online Courses. Intoximeters Training Academy is the industry’s most trusted provider of breath alcohol technician (BAT) training courses, for workplace breath testing as well as for law enforcement alcohol testing. We offer in-person classroom courses and convenient online

courses.

DRY GAS STANDARD

Dry Gas Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators should be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST. ALCO-SENSOR FST BREATH ALCOHOL TESTER Alco-Sensor FST. The Alco-Sensor FST is the industry standard for Preliminary Breath Testing (PBT) instruments. This evidential grade direct breath alcohol tester produces precise, accurate, and repeatable results. It also offers a simple passive breath tester procedure for fast screening of multiple subjects, as well as the

capacity to

ALCO-SENSOR IV CALIBRATION PROCEDURE Alco-Sensor IV Calibration Procedure Part 3. 1) To begin the Calibration, gently press Switch #1 and hold it down with calibration tool.2) While the calibration tool is pressed in Switch #1, insert the mouthpiece. Inserting the mouthpiece turns the unit ON. Four red squares should appear on the display. ALCO-SENSOR III BREATH ALCOHOL TESTER Alco-Sensor. III. Rated 5.00 out of 5 based on 1 customer rating. ( 1 customer review) Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol

concentration.

ALCO-SENSOR VXL CALIBRATION PROCEDURE Alco-Sensor VXL Calibration Procedure Part 3. The ASVXL will prompt you to connect the mouthpiece to the dry gas tank. Press the button on the regulator to provide the standard gas sample to the instrument for analysis. The instrument will detect the flow of gas and then draw an

automatic sample.

TRAINING - INTOXIMETERS TRAINING ACADEMY There is no excerpt because this is a protected post. MARITIME U.S. COAST GUARD BREATH ALCOHOL TESTING Intoximeters, Inc. has been supplying breath alcohol detection systems to the maritime industry for more than 15 years. We understand many of the issues with regard to alcohol testing at sea. In order to offer the best value, we have a line of evidential breath alcohol testing systems that address many concerns that we have seen in this market.

TECHNICAL FAQ

Intoximeters guarantees a minimum of twenty months for 108 liter, 55 liter, and 30 liter gas tanks. The Maritime sets are certified for five (5) years. After the expiration date, the manufacturer can no longer guarantee that the gas value will remain stable. Categories: Dry Gas Tanks, Technical. a. ALCO-SENSOR VXL CALIBRATION PROCEDURE Alco-Sensor VXL Calibration Procedure Part 3. The ASVXL will prompt you to connect the mouthpiece to the dry gas tank. Press the button on the regulator to provide the standard gas sample to the instrument for analysis. The instrument will detect the flow of gas and then draw an

automatic sample.

INTOXNET 6 BREATH ALCOHOL INSTRUMENT SOFTWARE IntoxNet 6 (version 6.x) IntoxNet centrally supports a network of Intoximeters instruments. The software facilitates test result transfer to a central, localized database for easy queries and reporting of multiple instruments. IntoxNet supports many of our instruments, including Alco-Sensor IV @Work, RBT IV, Alco-Sensor VXL,

Alcomonitor CC, and

ALCO-SENSOR FST CALIBRATION PROCEDURE Below are basic calibration instructions for the Intoximeters Alco-Sensor FST breath testing instrument. Unless your testing procedure dictates otherwise, a calibration is only necessary if an accuracy check has proven the instrument to be out of tolerance. Some users choose to calibrate the instrument more frequently to ensure that the instrument remains within tighter tolerances than GENERAL TECHNICAL SUPPORT FROM INTOXIMETERS Service programs offered by Intoximeters include warranty repair, extended warranty, non-warranty repair, preventative maintenance programs (Factory Recertification and Factory Inspection), software support and custom service programs designed to answer unique service needs. Intoximeters is committed to cost-effective, high-quality service programs that emphasize improved reliability and the

WET BATH STANDARD

Wet Bath Standard. Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. (Wet bath simulators would be used with properly certified and maintained ethanol solutions). In all cases the compressed gas tanks, simulators

and

ALCO-SENSOR III BREATH ALCOHOL TESTER Alco-Sensor. III. Rated 5.00 out of 5 based on 1 customer rating. ( 1 customer review) Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol

concentration.

CALIBRATION LOGBOOKS AND RECORDS FOR BREATH ALCOHOL TESTING Include test number, date/time, type of procedure, full name of Technician (not a signature), location, standard lot number, tank number, expiration date, expected value and result. Factory repair and inspection records. Copy the paperwork sent back with the unit from Intoximeters. Keep in the same notebook or file as the logbook.

MOUTHPIECE CATALOG

SM.- 010116 www.intox.com 23-0040-00 Regular/Large Hole AS / ASIII 23-0050-01 Restricted AS / ASIII 23-0030-00 One-Way AS / ASIII 23-0120-00 Alco-Sensor FST ASFST 23-0000-00

INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. MARITIME U.S. COAST GUARD BREATH ALCOHOL TESTING U.S. Coast Guard policy requires marine employers to have an alcohol testing device readily accessible on board the vessel to determine the presence of alcohol in the system of those directly involved in a Serious Marine Incident (SMI).

DRY GAS STANDARD

Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. ALCO-SENSOR FST BREATH ALCOHOL TESTER The Alco-Sensor FST provides accurate, repeatable results for breath alcohol testing. It is the industry’s fastest selling Preliminary Breath Testing (PBT) instrument. Over 120,000 FST’s have been sold

to date.

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST.

INTOXIMETERS

COVID-19 Response: TestSafe TM Mouthpiece Tested and proven to filter 99.9% of bacterial and viral particles. The Intoximeters TestSafe Mouthpiece is a patent pending, bi-directional filtered mouthpiece, based on filter technology similar to what is used in N-95 respirators. Independent, third-party testing indicates the TestSafe Mouthpiece can filter 99.99% of bacterial particles and 99.93% BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. MARITIME U.S. COAST GUARD BREATH ALCOHOL TESTING U.S. Coast Guard policy requires marine employers to have an alcohol testing device readily accessible on board the vessel to determine the presence of alcohol in the system of those directly involved in a Serious Marine Incident (SMI).

DRY GAS STANDARD

Intoximeters recommends that external accuracy checks and calibrations be performed using either a dry gas or wet bath standard approved for use by both NHTSA and Intoximeters. ALCO-SENSOR FST BREATH ALCOHOL TESTER The Alco-Sensor FST provides accurate, repeatable results for breath alcohol testing. It is the industry’s fastest selling Preliminary Breath Testing (PBT) instrument. Over 120,000 FST’s have been sold

to date.

INTOXIMETERS DRINK WHEEL TO MEASURE BLOOD ALCOHOL CONTENT The Intoximeters "Drink Wheel" is a form that you can fill out that when completed will instantly compute your estimated blood/breath alcohol concentration ("BAC") or blood alcohol content. This simulates the breath alcohol testing done by an Intoximeter Alco-Sensor FST. BREATH ALCOHOL TESTING SUPPLIES Here you’ll find everything you need for your breath alcohol testing program: mouthpieces, dry gas and calibration equipment, instrument and printing accessories, and training supplies. Intoximeters has been the leader in breath alcohol testing since 1945. BREATH ALCOHOL TRAINING INFORMATION Intoximeters Training Academy Classroom and Online Courses. Intoximeters Training Academy is the industry’s most trusted provider of breath alcohol technician (BAT) training courses, for workplace breath testing as well as for law enforcement alcohol

testing.

LAW ENFORCEMENT GRADE BREATH TESTERS Since 1945, Intoximeters has been manufacturing breath-testing instruments to assist in DUI enforcement. Through the years, we have led advancements in breath alcohol testing and road safety to provide the most accurate testing instruments available for law enforcement applications, including breath alcohol screening devices, handheld, portable, and desktop evidential instruments.

WET BATH STANDARD

Note: Always check the temperature of the simulator before use. Producing the proper expected alcohol concentration is dependent upon the simulator being heated to 34°C, + .2°C.Additionally, only use current simulator solution from an accredited supplier. GENERAL TECHNICAL SUPPORT FROM INTOXIMETERS Service programs offered by Intoximeters include warranty repair, extended warranty, non-warranty repair, preventative maintenance programs (Factory Recertification and Factory Inspection), software support and custom service programs designed to answer unique service needs. Intoximeters is committed to cost-effective, high-quality service programs that emphasize improved reliability and the ALCO-SENSOR IV CALIBRATION PROCEDURE Check the expected value of the standard you will be using to calibrate your device. (For this demonstration the value of the dry gas standard we used was .080% –

TECHNICAL FAQ

The Alco-Sensor VXL instrument has the capacity to store a large number of tests in its memory. If a fresh set of batteries are installed in the instrument after the instrument has had no power for a short period of time, the Alco-Sensor VXL will re-initialize the memory database as a self-diagnostic process. During this process the instrument emits a constant beep to indicate that it is ALCO-SENSOR IV HANDHELD BREATH ALCOHOL TESTER The Alco-Sensor IV (ASIV) is a handheld breath alcohol tester. It provides a simple, accurate and economical method of determining a subject’s breath alcohol ALCO-SENSOR III BREATH ALCOHOL TESTER Widely used, the Alco-Sensor III (ASIII) is a pocket-sized, handheld breath alcohol tester. This NHTSA approved Evidential Breath Alcohol Testing Device provides a simple, accurate and economical method of determining a subject’s breath alcohol concentration. ERASE ALCO-SENSOR IV WITH MEMORY Both of these options will allow you to erase the stored data following printing or uploading the data. If data storage is not an issue, the following are instructions for erasing the data stored on your Alco-Sensor IV memory instrument.: Erasing Test Data from the Alco-Sensor IV with Memory These step by step instructions are for Erasing Memory without first Uploading or Printing the stored United States of America United States of America

Login / Register

Change Your Country

United States of America United States of America

* Products

* Shop By Industry

* Workplace/DOT

* Law Enforcement

* Probations/Correction

* Maritime

* Medical Alcohol Tester

* Schools

* Personal Breath Alcohol Tester * Breath Alcohol Testers * Handheld Breath Testers * Portable Breath Testers * Desktop Breath Testers * Oral Fluid Drug Tester * SoToxa Mobile Test System * Oral Fluid Drug Tester * SoToxa Mobile Test System

* Supplies

* Breath Tester Mouthpieces * Sotoxa Oral Fluid Test Cartridge * Calibration Supplies * Instrument Accessories

* Printing Supplies

* BAT Training Aids & Supplies

* Software

* Alco-Sensor IV @ Work

* VXLerator

* IntoxNet

* Total Recall

* Extended Services

* Instrument Recertifications * Instrument Inspections * Extended Warranties

* Training

* Workplace Training * Law Enforcement Training

* Support

* Order Assistance

* Technical Support

* Maintenance Information * Repair And Return Information

* FAQ’s

* Ask DOTti

* Resources

* True-Trace

* Intoximeters Blog

* Forms And Catalogs * Educational Papers

* FAQs

* Employee Page

* Ask DOTti

* About Us

* Contact

* My Account

* Cart

Select Page

* Products

* Shop By Industry

* Workplace/DOT

* Law Enforcement

* Probations/Correction

* Maritime

* Medical Alcohol Tester

* Schools

* Personal Breath Alcohol Tester * Breath Alcohol Testers * Handheld Breath Testers * Portable Breath Testers * Desktop Breath Testers * Oral Fluid Drug Tester * SoToxa Mobile Test System * Oral Fluid Drug Tester * SoToxa Mobile Test System

* Supplies

* Breath Tester Mouthpieces * Sotoxa Oral Fluid Test Cartridge * Calibration Supplies * Instrument Accessories

* Printing Supplies

* BAT Training Aids & Supplies

* Software

* Alco-Sensor IV @ Work

* VXLerator

* IntoxNet

* Total Recall

* Extended Services

* Instrument Recertifications * Instrument Inspections * Extended Warranties

* Training

* Workplace Training * Law Enforcement Training

* Support

* Order Assistance

* Technical Support

* Maintenance Information * Repair And Return Information

* FAQ’s

* Ask DOTti

* Resources

* True-Trace

* Intoximeters Blog

* Forms And Catalogs * Educational Papers

* FAQs

* Employee Page

* Ask DOTti

* About Us

* Contact

* My Account

* Cart

Learn More

3

BREATH ALCOHOL TESTERS For DOT/workplace testing, law enforcement, schools, medical facilities, military, corrections and probations

View Now

TRAINING

First-class training programs by the industry’s most experienced trainers. Both classroom and online training options available.

View Now

ALCOHOL TESTING SUPPLIES NIST-traceable dry gas standards, mouthpieces, carrying cases, training materials, and other breath alcohol testing supplies.

View Now

ROADSIDE DRUG TESTING The first in its kind roadside drug testing tool for methamphetamines, THC, opiates, amphetamines, benzodiazepines, and cocaine metabolites.

View Now

PROFESSIONAL BREATH ALCOHOL TESTERS Let us put our experience to work for you. As the leader in the breath alcohol testing industry, Intoximeters has been continually pioneering and improving upon technology and industry standards. Our instruments are relied upon by law enforcement, major workplace testing organizations, and other testing industries in over 90 countries

worldwide.

Our Alco-Sensor line of alcohol testers are the most trusted in North America, and are currently being used in every state, including by Highway Patrols. The largest names in organizational health breath alcohol testing trust our instruments for use with both DOT and non-DOT workplace testing.

INTOX DRINK WHEEL

The BrAC Calculator

Estimate Your BrAC

THE LATEST NEWS

In Workplace Alcohol Testing and Training ESSENTIAL SUPPLIES CHECKLIST FOR BATS Have you ever been about to conduct a breath alcohol test or training class and realized, too late, that you didn't have an essential item on hand to complete the test? (We hope you didn't "wing" it!) Or, have you ever been asked for your BAT certificate and felt a...

read more

IS IT DOT OR NON-DOT? One of the most important pieces of information a BAT needs prior to beginning a drug or alcohol test is whether the test is DOT or non DOT.  This information will dictate which Alcohol Test Form will be used and what procedures the BAT will follow. The federal... FMCSA DRUG & ALCOHOL CLEARINGHOUSE INFORMATION The Federal Motor Carrier Safety Administration (FMCSA) Clearinghouse is on track to be up and running on January 6, 2020. The Clearinghouse will be a secure electronic database containing records of violations of drug and alcohol prohibitions of subpart B of 49CFR... 3 COMMON MISCONCEPTIONS ABOUT POST-ACCIDENT TESTING Many of our customers are service providers who conduct drug and alcohol tests for a variety of employers. Occasionally we hear about an employer who is not quite up to speed with the regulatory requirements for post-accident testing. The following questions come

up...

Copyright 2020 Intoximeters®

* Privacy Policy

* Shipping Costs

* Terms of Use

* Terms of Sale

* Patent

* Delivery Schedule

* Sitemap

* Careers

* Facebook

* Twitter

* Linkedin

BAT/EBT Instructor 302 Course (for AS IV @Work, AS IV w/Memory, and

AMCC)

BREATH ALCOHOL TECHNICIAN INSTRUCTOR TRAINING PLEASE NOTE:  THIS COURSE COVERS ONLY THE  ALCOMONITOR CC; ALCO-SENSOR IV WITH MEMORY; AND ALCO-SENSOR IV @WORK INSTRUMENTS. This BAT training class includes 1-day self study and three days in-classroom training and certifies students as Breath Alcohol Technicians (BATs) according to 49 CFR Part 40 regulations and as Breath Alcohol Technician (BAT) Instructors and Calibration Technician Instructors on a single Intoximeters EBT device.  Please note that certification on more than one instrument will incur additional

charges.

* Self-study (Online Learning Center) plus 3 days classroom * DOT Model Course – part 40 rules and regulations (online) * Intoximeters EBT instrument-specific training (classroom) * 7 mock tests in a classroom setting with an Intoximeters Corporate

Trainer

* Includes instruction on the Quality Assurance Plan (QAP) and

Accuracy Checks

* Passing a written exam is required for certification * Calibration Technician training (classroom) * Instructor resource manual, training aids, and electronic files

are provided

* Advanced EBT and calibration theory plus testimony issues are

discussed

* Successful presentations of BAT and calibration technician training modules are required for certification Note: This course is an advanced class over and above DOT BAT training requirements for instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration Technician and to train Factory Authorized Calibration Technicians. Calibration Trainer Agreement expires every 12 months. Recertification requirements are at the discretion of Intoximeters.

CLOSE

Maintenance School

Intoximeters offers complete technical and maintenance training to our law enforcement customers at our headquarters in St. Louis.  You must be a law enforcement officer working for the agency who owns the equipment to qualify for this training. Maintenance courses are offered once or twice per year at our St. Louis corporate offices. ONLINE REGISTRATION FOR MAINTENANCE SCHOOL CLASSES IS NOT AVAILABLE. PLEASE EMAIL THE TRAINING DEPARTMENT

TO

REGISTER, OR TO BE ADDED TO A WAITLIST FOR UPCOMING MAINTENANCE SCHOOL

CLASSES. CLOSE

405 UDS Collector Instructor Online This fully online train-the-trainer course that trains and qualifies the student for both DOT initial Collector training and DOT Collector refresher training. This advanced UDS Collector Instructor course (course #405) is an interactive web course designed to train individuals to conduct urine drug screen collections under the 49 CFR Part 40 (DOT) regulations and certify them as a Collector Instructor to train others to be Collectors in their own company. A certificate will be issued to successful participants. A Mastery Test at the end must be passed to obtain a proof of completion. This course includes 1 day self-study and 1 day of classroom webcam

instruction.

THE COURSE INCLUDES: * Self-study – 49 CFR Part 40 Procedures, Rules & Regulations

(online)

* Advanced Collector and Collector Instructor training

*

* 1st portion: Mocks, * 2nd portion: Collector Instructor * 5 mock tests with an Intoximeters Corporate Trainer (webcam) * Includes instruction on the Collection Procedures outlined in 49

CFR Part 40

* Passing a written exam is required for certification * Instructor resource manual, training aids, and electronic files

are provided

* Advanced UDS Collector training * Successful presentations of Collector modules are required for

certification

Note: This course is an advanced class over and above DOT’s requirements for Urine Drug Screen Collector instructors. Successful completion of the Instructor Course authorizes the individual as a DOT UDS Collector and Instructor. WHAT IS THE PROCESS? * Register for the course * Complete the 1st component – online self-study component of the

training

* Complete the 2nd component – successfully complete Qualification training and 5 error-free mocks in the view of an Intoximeters Corporate Trainer as the Monitor * Complete the 3rd and final component – Collector Instructor

Train-the-Trainer

Once the student has successfully completed the online self-study components then a date and time will be confirmed for an Intoximeters Corporate Trainer to monitor the student performing 5 error-free mock collections to complete the Qualification component of the Collector training. For this portion of the class the student must have the required materials. After the completion of the 5 error-free mocks, the BAT Instructor training will commence on. Intoximeters will send all necessary training course materials including check sheets prior to the video conference. Student(s) must have an adjustable webcam and a high speed internet connection set up and working prior to the webcam session. If 2 people are being trained, they will act as subjects for each other.

CLOSE

305 BAT/EBT Instructor Course Online PLEASE NOTE:  THIS COURSE COVERS ONLY THE RBT IV AND THE RBT VXL

INSTRUMENTS.

This fully online train-the-trainer course is available for the RBT IV/Alco-Sensor IV and the Alco-Sensor VXL instruments and qualifies for both DOT initial BAT training and DOT BAT refresher training and includes BAT Instructor. A Mastery Test at the end must be passed to obtain a proof of completion. This course includes 1 day self-study and 2 consecutive days of classroom webcam instruction. Certification on more than one instrument will incur additional charges and one additional day of training. THE COURSE INCLUDES: * Self-study DOT Model Course – Part 40 Rules and Regulations

(online)

* Advanced 2 consecutive days BAT and BAT Instructor training

*

* Day 1: Mocks,

* Day 2: BAT Instructor * Instrument Proficiency orientation (online) * Intoximeters EBT instrument-specific training (webcam) * 7 mock tests with an Intoximeters Corporate Trainer (webcam) * Includes instruction on the Quality Assurance Plan (QAP) and

Accuracy Checks

* Passing a written exam is required for certification * Calibration Technician training * Instructor resource manual, training aids, and electronic files

are provided

* Advanced EBT training * Successful presentations of BAT modules are required for

certification

Note: This course is an advanced class over and above DOT’s requirements for BAT instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration

Technician.

WHAT IS THE PROCESS? Once the student has successfully completed the online self-study components then a date and time will be confirmed for an Intoximeters Corporate Trainer to monitor the student performing 7 error-free mock alcohol tests to complete the Instrument Proficiency component of the BAT training. For this portion of the class you must have a working EBT instrument with printer and a valid (not expired) dry gas tank. After the completion of the 7 error-free mocks, the BAT Instructor training will commence on.

CLOSE

BAT/EBT 202 Course (for AS IV @Work, AS IV w/Memory, and AMCC) PLEASE NOTE:  THIS COURSE COVERS ONLY THE ALCOMONITOR CC; ALCO-SENSOR IV WITH MEMORY; AND ALCO-SENSOR IV @WORK INSTRUMENTS. This self study and one day in-classroom course certifies students as Breath Alcohol Technicians according to 49 CFR Part 40 regulations published by the U.S. Department of Transportation. This is Intoximeters’ standard method of training BATs and is appropriate for customers conducting DOT alcohol tests AND non-DOT testing. * Self-study (Online Learning Center) plus 1-Day Classroom * DOT Model Course – part 40 rules and regulations (online) * Intoximeters EBT instrument-specific training (classroom) * 7 mock tests with an Intoximeters Corporate Trainer (classroom) * Includes instruction on the Quality Assurance Plan (QAP) and

Accuracy Checks

* Passing a written exam is required for certification Upon successful completion of the required minimum seven tests and a written quiz, students will receive certification as Breath Alcohol Technicians.  Please note that, effective in June, 2015, Calibration Technician Training has been incorporated into our Instructor class and is no longer offered as part of this basic BAT course.

CLOSE

BAT/EBT/Instructor 301 (for RBT IV, RBT VXL) Breath Alcohol Technician Instructor Training PLEASE NOTE:  THIS COURSE COVERS ONLY THE RBT IV AND THE RBT VXL

INSTRUMENTS.

This course includes 1 day self-study and 2 days of classroom instruction.  The course has been shortened by 1 day for certain of our instruments since the introduction of our new on-line EBT Proficiency training program.  Please note that certification on more than one instrument will incur additional charges and one additional day of training. * Self-study (Online Learning Center) plus 2 days classroom * DOT Model Course – part 40 rules and regulations (online) * Intoximeters EBT instrument-specific training (classroom) * 7 mock tests in a classroom setting with an Intoximeters Corporate

Trainer

* Includes instruction on the Quality Assurance Plan (QAP) and

Accuracy Checks

* Passing a written exam is required for certification * Calibration Technician training (classroom) * Instructor resource manual, training aids, and electronic files

are provided

* Advanced EBT and calibration theory plus testimony issues are

discussed

* Successful presentations of BAT and calibration technician training modules are required for certification Note: This course is an advanced class over and above DOT’s requirements for BAT instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration Technician and to train Factory Authorized Calibration Technicians. Calibration Trainer Agreement expires every 12 months. Recertification requirements are at the discretion of Intoximeters.

CLOSE

Law Enforcement Instructor Intoximeters law enforcement Instructor Course is a 4-hour session that includes Operator/Calibration training plus discussions of common errors/misconceptions, Void and/or Status Codes, and how to monitor trainees to insure the best possible outcome. Electronic resources will be provided and instructor candidates will have an opportunity to practice presenting a section of the course. You must be a law enforcement officer working for the agency who owns the equipment to qualify for this training. Law Enforcement Instructor courses are offered both at our St. Louis training facility and in select regional locations. Please e-mail the Training Department

for

additional information.

CLOSE

Law Enforcement Operator You must be a law enforcement officer working for the agency who owns the equipment to qualify for this training.  This is a 3-hour course that includes basic operation, explanations of instrument displays and functions, and hands-on practice. The class covers automatic sampling, insufficient breath, manual sampling and mouth alcohol effects.  Additional discussions of calibration theory and the procedures for accuracy checks and calibrations will also be presented. Law Enforcement Operator courses are offered both at our St. Louis training facility and in select regional locations.  Scroll down to

select your class.

Please e-mail the Training Department

for

additional information.

CLOSE

One-Day Urine Collector & Instructor Course Urine Drug Screen Collector and Instructor Training (1 day classroom) This course trains the student as a Collector and provides materials & guidance for use in training other collectors. A certificate will be issued to successful participants. Scroll down to view class schedule. This course includes an online self-study module to be completed prior to the classroom session.   Topics include qualification requirements for collectors, trainers, and monitors, important definitions, collection site facility requirements, the new Custody and Control Form, steps in the collection process, and obstacles to completing a collection.  A Mastery Test at the end must be passed to obtain a proof of completion. Classroom activities include detailed review of procedures before each mock test (5 in all).  The course also includes discussions of instructor resources, monitoring student mock tests and available online materials. An Instructor manual and materials are provided for use in training collectors in your own company. QUESTIONS?  Contact the Training Department

CLOSE

Fully Online UDS Collector 110 Course (Urine Drug Screen training) The online UDS Collector course (course #110) is an interactive web course designed to train individuals to conduct urine drug screen collections under the 49 CFR Part 40 (DOT) regulations.  The course

includes:

* 49 CFR Part 40 Procedures & Regulations via online self-study

module

* 5 online mock tests via webcamCourse topics include qualification requirements for collectors, trainers, and monitors, responsibilities of the collector as the gatekeeper of the process, important definitions, how to complete the Custody and Control Form, steps in the collection process, and a written examination. To participate in online Specimen Collector training, you will need the following materials: * A computer with a high speed internet connection and an external

adjustable webcam

* 9 Custody & Control Forms (CCFs) * 7 DOT compliant split specimen collection kits * A pitcher of warm water to simulate urine samples during the mock

tests

* Another person to act as a donor (DOT requires that the mock tests be performed on a live subject)  QUESTIONS?  Contact the Training

Department

CLOSE

BAT/EBT 201 Course (for RBT IV and RBT VXL) Breath Alcohol Technician Training PLEASE NOTE:  THIS COURSE IS AVAILABLE ONLY TO RBT IV AND RBT VXL

USERS.

This self study and half day in-classroom course certifies students as Breath Alcohol Technicians according to 49 CFR Part 40 regulations published by the U.S. Department of Transportation. This is Intoximeters??? standard method of training BATs and is appropriate for customers conducting DOT alcohol tests AND non-DOT testing. * Self-study (Online Learning Center), plus 1/2 day classroom * DOT Model Course – part 40 rules and regulations (online) * Intoximeters EBT instrument-specific training (online) * Review of online EBT proficiency (classroom) * 7 mock tests with an Intoximeters Corporate Trainer (classroom) * Includes instruction on the Quality Assurance Plan (QAP) and

Accuracy Checks

Upon successful completion of the required minimum seven tests and a written quiz, students will receive certification as Breath Alcohol Technicians.  Please note that, effective in June, 2015, Calibration Technician Training has been incorporated into our Instructor class and is no longer offered as part of the basic BAT course.

CLOSE

Fully Online BAT/EBT 101 Course (for RBT IV and RBT VXL only) This fully online course is available for the RBT IV/Alco-Sensor IV and the Alco-Sensor VXL instruments and qualifies for both DOT initial BAT training and DOT BAT refresher training.  The course includes: * 49 CFR Part 40 Rules & Regulations via online Computer Based

Training

* Instrument Proficiency orientation via online Computer Based

Training

* 7 online mock tests via web cam * Quality Assurance Plan instruction * Accuracy Check instruction Once the student has successfully completed the online self-study components then a time will be scheduled for an Intoximeters Corporate Trainer to monitor the student performing 7 error-free mock alcohol collections to complete the Instrument Proficiency component of the BAT training. For this portion of the class you must have a working EBT instrument with printer and a valid (not expired) dry gas tank. Intoximeters will send check sheets and a sample logbook prior to the video conference.  Student(s) must have an adjustable webcam and a high speed internet connection set up and working prior to the webcam session.  In addition, it is required for the student to have a working EBT instrument with printer, a valid dry gas standard with regulator and a partner who can act as a subject for the mock tests. If 2 people are being trained, you will act as subjects for each

other. CLOSE

0

YOUR CART

No products in the cart.