MCHOBBY - VENTE DE RASPBERRY PI, ARDUINO, ODROID, ADAFRUIT Prototype your ideas. Analyse, design, document and translate are the skills availables at MC Hobby. MC Hobby is like a knowledge Swiss knife for the Makers with know how covering various areas like Raspberry Pi, Arduino, Odroid, development, IoT, prototyping tools the right place to make the firsts steps of a new project.

M5STICKC PLUS

M5StickC PLUS is an updgrade of the M5Stick C. It is powered by an ESP32-PICO-D4, have a bigger screen and support Bluetooth 4.0 & WiFi. This development board is ultra portable, easy-to-use, open source and designed for IoT operation. This tiny device can be used to materialize your ideas, create IoT prototypes, wearable control

center, smart

ADAFRUIT PYGAMER

PyGamer - DIY Gaming development plateform ATSAMD51519 @ 120 MHz Ram: 192 K Flash: 8 MB (QSPI) 160 x 128 TFT Color Neopixels Accelerometer

Light sensor

PYBOARD-D SF6W

PERISTALTIC PUMP 5V-6V + TUBE SILICONE A 5 - 6V peristaltic pump with silicone tube. Need to move some fluide safely from one container to one other? maybe in the two ways? Great, here is a LOW VOLTAGE peristatic pump working with a MINI AZERTY KEYBOARD Micro Stepper Motor, linear 30mm, 3.3-5V, 20 step. Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas

3W I2S AMPLIFIER

I2C Mono amplifier suited for Raspberry Pi 2.5-5.5V 3W Mono (left+right/2) 4-8 Ohms I2S interface POWER SWITCH TAIL 240V AC The Power Switch Tail is a nice alternative to slice power cords in order to wire up your own protected relays in the middle of the cord. It can be place in the middle of the 220/240V AC power cord (or multi-plug word) and open/close the power with a relay board embedded inside a protective case. Control to the relay using two screw

terminals

SOUND LEVEL METER (DECIBEL-METER) Noise meter 3.3 to 5.0V 30 to 130 dB(A) Analog output: 0.6 to 2.6V Linear conversion (dB A -> volts) High precision Easy to use GPIO DUPLICATOR FOR RASPBERRY-PI Micro Stepper Motor, linear 30mm, 3.3-5V, 20 step. Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas MCHOBBY - VENTE DE RASPBERRY PI, ARDUINO, ODROID, ADAFRUIT Prototype your ideas. Analyse, design, document and translate are the skills availables at MC Hobby. MC Hobby is like a knowledge Swiss knife for the Makers with know how covering various areas like Raspberry Pi, Arduino, Odroid, development, IoT, prototyping tools the right place to make the firsts steps of a new project.

M5STICKC PLUS

M5StickC PLUS is an updgrade of the M5Stick C. It is powered by an ESP32-PICO-D4, have a bigger screen and support Bluetooth 4.0 & WiFi. This development board is ultra portable, easy-to-use, open source and designed for IoT operation. This tiny device can be used to materialize your ideas, create IoT prototypes, wearable control

center, smart

ADAFRUIT PYGAMER

PyGamer - DIY Gaming development plateform ATSAMD51519 @ 120 MHz Ram: 192 K Flash: 8 MB (QSPI) 160 x 128 TFT Color Neopixels Accelerometer

Light sensor

PYBOARD-D SF6W

PERISTALTIC PUMP 5V-6V + TUBE SILICONE A 5 - 6V peristaltic pump with silicone tube. Need to move some fluide safely from one container to one other? maybe in the two ways? Great, here is a LOW VOLTAGE peristatic pump working with a MINI AZERTY KEYBOARD Micro Stepper Motor, linear 30mm, 3.3-5V, 20 step. Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas

3W I2S AMPLIFIER

I2C Mono amplifier suited for Raspberry Pi 2.5-5.5V 3W Mono (left+right/2) 4-8 Ohms I2S interface POWER SWITCH TAIL 240V AC The Power Switch Tail is a nice alternative to slice power cords in order to wire up your own protected relays in the middle of the cord. It can be place in the middle of the 220/240V AC power cord (or multi-plug word) and open/close the power with a relay board embedded inside a protective case. Control to the relay using two screw

terminals

SOUND LEVEL METER (DECIBEL-METER) Noise meter 3.3 to 5.0V 30 to 130 dB(A) Analog output: 0.6 to 2.6V Linear conversion (dB A -> volts) High precision Easy to use GPIO DUPLICATOR FOR RASPBERRY-PI Micro Stepper Motor, linear 30mm, 3.3-5V, 20 step. Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas VARIOUS - MCHOBBY - VENTE DE RASPBERRY PI, ARDUINO, ODROID Micro Stepper Motor, linear 30mm, 3.3-5V, 20 step. Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas

DC CURRENT MOTOR

RP2040 microcontoler - Dual Core - Cortex M0+ @ 133Mhz. RP2040 MicroControler Dual Core Cortex-M0 at 133 Mhz 264 Kio RAM CART - MCHOBBY - VENTE DE RASPBERRY PI, ARDUINO, ODROID Product successfully added to your shopping cart Quantity. Total RASPBERRY PI 3, RASPBERRY PI ZERO, RASPBERRY PI A+ The Raspberry Pi 3 is a nano computer with 4 cores build on a single board. It is a NANO computer designed by the Raspberry Pi foundation in United Kingdom. The Raspberry Pi was created to stimulate the fundamental computer science learning at school. Build around a Boardcom ARM processor and including WiFi and Bluetooth technologies, the Raspberry-Pi is also well known for its 40 pins GPIO

PYBOARD-D SF6W

Pyboard D-series, SF6W, RED STM32F767 @ 216 MHz 512 Kio RAM 2 Mio Internal Flash + 2 Mio QSPI Flash (extend internal flash) Another 2 Mio QSPI Flash for storage and user filesystem Double Precision Floating Point Wifi + Bluetooth

3D GESTURE SENSOR

Mini gesture sensor Electric field (10 cm) Near motion (5 cm) I2C Interface 3.3 / 5V compatible Spatial resolution 150 dpi SEN0202

RASPBERRY-PI 4

The Raspberry Pi 4 is a revolution in the nano-computer worldwith a 4 cores processor, USB 3 ports, 2 HDMI output, 4K support and a True Ethernet Gigabit. La possibility to have a Raspberry-Pi board with 1, 2 or 4 Go of RAM. The Pi 4 can now replace the desk computer since STEPPER CONTROLER, 36V4, 4A Stepper controleur 36v4 - micro-stepping MicroStepping: 1/256 step Motor voltage: 8 - 50V Logic: 1.8V, 3.3V & 5.8V Motor current: 4A Max per coil (6A peak en pointe) Configurable via SPI STEP/DIR control (or full control via SPI) Based on DRV8711 + external MOSFET ARGON ONE M2 ALU PASSIVE CASE FOR RASPBERRY-PI 4 A passive + active case with M2 Sata support and Standard HDMI output for Raspberry-Pi 4. L'Argon One M2 is a revision of the famous Argon One case now including two majors upgrades as support for Sata M2 disk (wikipedia) and the video output mapped to full-size HDMI. the ARGON cases are passive coling!A great case that will gring the Raspberry-Pi

at the next level!

ADAFRUIT CLUE EXPRESS Adafruit CLUE - Cortex M4 Nordic nRF52840 - @ 64 Mhz 1Mb Flash, 256 KB RAM TFT 240 x 240 2MB Flash storage Sensors (LSM6DS33, LIS3MDL, APDS9960, microphone, sht, BMP280) Buzzer Arduino / CircuitPython only

Sign in

English

* English

* Français

Contact us

3,189 4.9 star rating

Avis certifiés

Proposé par YOTPO

Search

CART 0 Product Products (empty)

No products

To be determined Shipping

0,00 € Tax

0,00 € Total

Prices include tax.

Checkout__

__Product successfully added to your shopping cart

QUANTITY

TOTAL

There are 0 items in your cart. There is 1 item in your cart. TOTAL PRODUCTS (TAX INCL.) TOTAL SHIPPING (TAX INCL.) To be determined

TAX 0,00 €

TOTAL (TAX INCL.)

__Continue shopping Proceed to checkout__

* Contact

* Sitemap

*

Menu

* Home

* Raspberry Pi 4

* Pi Camera

* Raspberry-Pi 4 Kits * Raspberry Pi 4 case * Ecrans TFT, LCD pour Raspberry-Pi 4

* Sound cards

* HATs

* Not HATs

* Goodies

* Raspberry PI 3

* Pi Camera

* Raspberry's Kits

* Raspberry Case

* Ecrans TFT, LCD, etc

* Pi ZERO Gadget

* Nano Computers

* Raspberry Pi A & B Plus

* ODroid

* Odroid-XU4

* ODroid-N2

* ODroid-C2

* ODroid-C1+

* ODroid screen

* OlinuXino

* OlinuXino A10 Lime * OlinuXino A20 Lime2 * OlinuXino A20 Micro

* OlinuXino A64

* BeagleBone

* Pine64

* Internet Of Things * WEMOS / LOLIN (ESP)

* Spark.IO

* ESP8266 - module WiFi et plateforme IoT * WiPy, LoPy - IoT en Python * Microcontroler board

* Arduino

* Cartes et Kits

* Shields

* Accessories

* Pico / RP2040

* MicroPython

* PYBStick

* M5Stack (ESP)

* Feather

* A-Star

* Flora & Gemma

* Arduino compatible

* Trinket

* Autres plateformes

* Young Engineers

* MaKey-MaKey

* Micro:bit

* Circuit Playground

* Bare Conductive

* Skill Badge

* RetroGaming

* Motor & robotic

* DC Motor

* Stepper motor

* Servo Motor

* Motor controler

* Robotic prototyping & wheels

* Romi Robot

* MakerBeam / Mechanical / CNC

* MakerBeam

* LEDs / NeoPixels / ElWire * LEDs & LEDs displays * NeoPixels & Dotstar

* ELWire

* Sensor & prototyping * Wire & prototyping * Touch, Flex, Pot, SoftPad

* Switch & button

* Environnemental (Press. Temp. Hum. Gas)

* Temperature

* Movement

* Distance & proximity * Displays, LCD, TFT, OLED

* Printer & Camera

* UEXT

* GRAVITY / Boson

* GROVE

* Various sensors

* Breakout board

* Electronics

* Transistor

* Circuits Intégrés

* Mini kits

* Resistor

* Potentiometer

* Capacité

* Connectors & Headers

* Crimp connector

* Relay modules

* Various

* PSU,Battery,Lipo,...

* Power Supply

* Battery pack

* Lipo & regulator

* Regulator

* Wire & cables

* Wire & prototyping wires * USB Cables & connector * HDMI, Video, Audio cable

* AC Cable

* Banana cables & connectors * BNC cable & connectors

* Case & enclosure

* Tools

* Fer

* Visserie

* Various

* Gift card

* Documentation

* New Products

* Prices drop

* Wiki

* Forum

* Blog

* Our Facebook Page

*

Show me !

*

*

*

*

*

Show me more >

*

*

Show me !

*

Discover it !

*

Discover it !

*

More info !

*

Discover it !

*

Show me !

*

PrevNext

*

*

Categories

* Raspberry Pi 4 Nouveau

* Pi Camera

* Raspberry-Pi 4 Kits * Raspberry Pi 4 case Nouveau * Ecrans TFT, LCD pour Raspberry-Pi 4

* Sound cards

* HATs

* Not HATs

* Goodies

* Raspberry PI 3

* Pi Camera

* Raspberry's Kits

* Raspberry Case

* Ecrans TFT, LCD, etc

* Pi ZERO Gadget

* Nano Computers

* Raspberry Pi A & B Plus

* ODroid

* Odroid-XU4

* ODroid-N2

* ODroid-C2

* ODroid-C1+

* ODroid screen

* OlinuXino

* OlinuXino A10 Lime * OlinuXino A20 Lime2 * OlinuXino A20 Micro

* OlinuXino A64

* BeagleBone

* Pine64

* Internet Of Things * WEMOS / LOLIN (ESP)

* Spark.IO

* ESP8266 - module WiFi et plateforme IoT * WiPy, LoPy - IoT en Python * Microcontroler board

* Arduino

* Cartes et Kits

* Shields

* Accessories

* Pico / RP2040

* MicroPython

* PYBStick

* M5Stack (ESP)

* Feather

* A-Star

* Flora & Gemma

* Arduino compatible

* Trinket

* Autres plateformes

* Young Engineers

* MaKey-MaKey

* Micro:bit

* Circuit Playground

* Bare Conductive

* Skill Badge

* RetroGaming

* Motor & robotic

* DC Motor

* Stepper motor

* Servo Motor

* Motor controler

* Robotic prototyping & wheels

* Romi Robot

* MakerBeam / Mechanical / CNC

* MakerBeam

* LEDs / NeoPixels / ElWire * LEDs & LEDs displays * NeoPixels & Dotstar

* ELWire

* Sensor & prototyping * Wire & prototyping * Touch, Flex, Pot, SoftPad

* Switch & button

* Environnemental (Press. Temp. Hum. Gas)

* Temperature

* Movement

* Distance & proximity * Displays, LCD, TFT, OLED

* Printer & Camera

* UEXT

* GRAVITY / Boson

* GROVE

* Various sensors

* Breakout board

* Electronics

* Transistor

* Circuits Intégrés

* Mini kits

* Resistor

* Potentiometer

* Capacité

* Connectors & Headers

* Crimp connector

* Relay modules

* Various

* PSU,Battery,Lipo,...

* Power Supply

* Battery pack

* Lipo & regulator

* Regulator

* Wire & cables

* Wire & prototyping wires * USB Cables & connector * HDMI, Video, Audio cable

* AC Cable

* Banana cables & connectors * BNC cable & connectors

* Case & enclosure

* Tools

* Fer

* Visserie

* Various

* Gift card

* Documentation

Specials

*

- WiPy v1.3 - Python Microcontroller with WiFi support WiPy - MicroPython WiFi...

18,15 € 29,65 €

All specials__

Manufacturers

* Adafruit

* Arduino

* Bare Conductive

* DFRobot

* Garatronic

* HiFiBerry

* Kitronik

* M5Stack

All manufacturers All manufacturers Adafruit Arduino Bare Conductive DFRobot Garatronic HiFiBerry Kitronik M5Stack MakerBeam MAKERbuino ODroid Olimex Particle.IO Pimoroni Pololu RiiTek UniPi Technology

Velleman Watterott

Tags

Résistance

microbit microPython

Gravity

feather

wemos

grove

audio

wing

UEXT

__ __

* New arrivals

* Popular

* Best Sellers

*

1,21 € In Stock New RP2040 MICROCONTOLER - DUAL CORE - CORTEX... RP2040 MicroControler Dual Core Cortex-M0 at 133 Mhz 264 Kio RAM (on-chip) External Flash (off-chip) 30 GPIOs

1,21 €

Add to cart

More

In Stock

*

11,86 € In Stock New 16A RELAY MODULE GRAVITY, DIGITAL Gravity : relay module Max 16A @ 250V AC Max 16A @ 24V DC Power : 5V

DFR0251

11,86 €

Add to cart

More

In Stock

*

32,67 € Out of stock New ULTRASONIC WATERPROOF DISTANCE SENSOR –... A01NYUB Ultrasonic sensor - IP67 Max distance: 28cm - 4m (tested up to 7.5m en situation optimale) Interface: serial 9600 bauds Logical level: 5V et 3.3V Arduino/Raspberry/MicroPython

32,67 €

Add to cart More

Out of stock

*

10,77 € In Stock New MOTION DETECTION VIA MICROWAVE RADAR Motion / proximity detection  Microwave 2-16 m (continuously adjustable) Interface : digital (gravity connector 3 pins) 5V SEN0192

10,77 €

Add to cart

More

In Stock

*

5,11 € In Stock New CONNECTOR GROVE TO PINHEADER - 10PCS 10x Grove connector to male pinHeader

5,11 €

Add to cart

More

In Stock

*

15,61 € In Stock New MICRO STEPPER MOTOR, LINEAR 30MM, 3.3-5V,... Micro stepper motor, linear 30mm 4 wires, bipolar 18° per step 20 pas

3.3 - 5V (20 ohms)

15,61 €

Add to cart

More

In Stock

*

9,08 € In Stock New EXTENDER / TERMINATOR BUS I2C, LTC4311 Extender / acive terminator I2C bus, LTC4311 400 Khz 1.6V to 5.5V Improve the transition low noise

9,08 €

Add to cart

More

In Stock

*

10,29 € In Stock New BIDIRECTIONAL I2C ISOLATOR, ISO1540 I2C isolator, ISO1540 breakout Bidirectional Level shifter 1 Mhz 3-5V compatible Stemma QT, Qwiic compatible

10,29 €

Add to cart

More

In Stock

*

23,95 € In Stock New HAT POE+ FOR RASPBERRY PI Power up the Raspberry-Pi from an Ethernet cable Pi 3 B+ / Pi 4 15W max. (5V, 3A) Protected against over-current, over-voltage, open circuit, overheat Ethernet cable: 100m max. Ventilator controled with

Micro-Controler

23,95 €

Add to cart

More

In Stock

*

33,72 € In Stock New FEATHER NRF52840 SENSE Feather Bluetooth LE with sensors nRF52840 Gyro / Accel LSM6DS33 Mag. LIS3MDL Lux, proximity, movement: APDS9960 Microphone Humidity SHT Pressure, temp.: BMP280

33,72 €

Add to cart

More

In Stock

*

3,03 € In Stock New MINI 2-AXIS ANALOG JOYSTICK Mini analog joystick  2-axis analog (10K) self-centering NO CLICK BUTTON  Style PSP

3,03 €

Add to cart

More

In Stock

*

0,91 € In Stock New 5 X CAPACITOR 100UF - ELECTROLYTIC - 25V 5x Electrolytic capacitor 100 µF - 25v

0,91 €

Add to cart

More

In Stock

*

39,16 € In Stock

RASPBERRY PI 3 B PLUS !! AVAIL. IN STOCK !! The Raspberry Pi 3 Model B plus 4 Core 1.4 Ghz (ARMv8) 1 Giga of RAM. Wifi 2.4 & 5 Ghz Bluetooth 4.2 Ethernet boosted up tp 300 Mb/s 4x USB

GPIO 40 pins

39,16 €

Add to cart

More

In Stock

*

44,95 € 49,95 € Out of stock PI DESKTOP FOR RASPBERRY-PI Motherboard and case to transform your Raspberry-Pi in a desktop

computer.

44,95 € 49,95 €

Add to cart More

Reduced price! Out of stock

*

9,95 € Out of stock LE MAGPI FRENCH VERSION N° 1 French version of the MagPi - Avril-Mai 2018

9,95 €

Add to cart More

Out of stock

*

7,95 € In Stock

LE MAGPI VLAAMS VERSION N° 1 Vlaams version of the MagPi - Avril-Mai 2018

7,95 €

Add to cart

More

In Stock

*

36,95 € Out of stock - RASPBERRY PI 3 !! DE STOCK !! The Raspberry Pi 3 - even faster than the Pi 2, 1 Giga of RAM, WiFi & Bluetooth, a nano computer type Linux. Raspberry Pi® and its logo are registered trademarks of the Raspberry Pi Foundation.

36,95 €

Add to cart More

Out of stock

*

79,96 € Out of stock TFT TOUCH SCREEN FOR PI - 800X400PX - 7" -... RPi Touch screen - 7" Touch screen  - DSI bus - Multi-touch 10

fingers.

79,96 €

Add to cart More

Out of stock

*

22,00 € In Stock

- ARDUINO UNO R3 (ATMEGA328 - ASSEMBLÉ) Prototyping and e-learning platform for creating interactive objects or environments. Ideal to start.

22,00 €

Add to cart

More

In Stock

*

18,89 € In Stock

MINI AZERTY KEYBOARD - ERGONOMIC - WIRELESS AZERTY Keyboard Rii Mini 8 Ergonomic wireless (radio)

18,89 €

Add to cart

More

In Stock

*

189,67 € Out of stock PICADE ARCADE WITH SCREEN Arcade kit, SCREEN INCLUDED - for Raspberry Pi - stylized, retro and

too fun

189,67 €

Add to cart More

Out of stock

*

85,67 € Out of stock - KIT D'EXPÉRIMENTATION POUR ARDUINO-... Arduino Learning and Experimentation Kit very complete with online documentation available in French. A must to discover the Arduino

universe.

85,67 €

Add to cart More

Out of stock

*

23,96 € Out of stock LIPOLY BATTERY - USB - 5000 MAH - 5V LiPoly Battery - USB, rechargeable USB - 5000mAh - 5v

23,96 €

Add to cart More

Out of stock

*

39,70 € In Stock

- MICRO PYTHON PYBOARD Pyboard is a compact and powerful development card running Micro

Python.

39,70 €

Add to cart

More

In Stock

*

9,95 € In Stock

LE MAGPI FRENCH VERSION N° 2 French version of the MagPi - Mai-Juin 2018

9,95 €

Add to cart

More

In Stock

*

9,95 € In Stock

LE MAGPI VLAAMS VERSION N° 2 Vlaams version of the MagPi - Mei-Juni 2018

9,95 €

Add to cart

More

In Stock

*

12,60 € In Stock

PYBSTICK STANDARD 26 - MICROPYTHON AND... PYBStick Standard 26 MicroPython and Arduino Ready 26 pins STM32F411RE 512 Ko Flash 128 Ko RAM SD Card installed

12,60 €

Add to cart

More

In Stock

*

25,98 € In Stock

MINI RGB AZERTY KEYBOARD - ERGONOMIC -... AZERTY Keyboard Rii Mini X8 back light RGB keyboard Touchpad Scrolling roulette Ergonomic Wireless (radio)

25,98 €

Add to cart

More

In Stock

*

36,95 € Out of stock - RASPBERRY PI 3 !! DE STOCK !! The Raspberry Pi 3 - even faster than the Pi 2, 1 Giga of RAM, WiFi & Bluetooth, a nano computer type Linux. Raspberry Pi® and its logo are registered trademarks of the Raspberry Pi Foundation.

36,95 €

Add to cart More

Out of stock

*

9,75 € Out of stock PROTOTYPING WIRE FOR BREADBOARD... Assortment of BreadBoard wires Female-Female 300mm and 75 mm + Long

PinHeader

9,75 €

Add to cart More

Out of stock

*

9,08 € In Stock

BREADBOARD WIRE SET (75 ITEMS) 75 extra flexible prototyping wires for breadboard

9,08 €

Add to cart

More

In Stock

*

4,50 € In Stock New PICO (RP2040) - 2 CORES MICROCONTROLER... 25 Max. per order Raspberry-Pi Pico Microcontoler RP2040 Cortex M0+ @ 133 MHz, 2 cores 2 MBytes Flash 265 KBytes SRAM 30x GPIO @ 3.3V (26 freely available) 6x ADC 12bits 16x PWM 2x UART, 2x I2C, 2x SPI SD IO, VGA IO SWD debug port

4,50 €

Add to cart

More

In Stock

*

22,00 € In Stock

- ARDUINO UNO R3 (ATMEGA328 - ASSEMBLÉ) Prototyping and e-learning platform for creating interactive objects or environments. Ideal to start.

22,00 €

Add to cart

More

In Stock

*

4,95 € In Stock

- DISSIPATEURS DE CHALEUR POUR RASPBERRY 2 heat sinks + adhesive - high performance, for your Raspberry-Pi

4,95 €

Add to cart

More

In Stock

* __

QUICK DELIVERY

Your orders processed the same day and shipped the next morning.

* __

DOCUMENTATION

Products are documented FOR FREE on the MCHobby Wiki !

* __

SECURE PAYMENTS

You have 4 secure payment options: VISA / MasterCard, PayPal, Bank Transfer or Bancontact * (* only pick up locally) FIND RASPBERRY PI, ARDUINO, ODROID, PYBOARD, WIPY AND OTHER MICRO-CONTROLLERS AT MCHOBBY. QUALITY AND DETAILLED PRODUCTS. PROTOTYPE YOUR IDEAS Analyse, design, document and translate are the skills availables at MC Hobby. MC Hobby is like a knowledge Swiss knife for the Makers with know how covering various areas like Raspberry Pi, Arduino, Odroid, development, IoT, prototyping tools... the right place to make the firsts steps of a new project. Curious, passionated or pro, we would guide you to the best product

for your needs.

Join-us, you will be delighted...

NEWSLETTER

Ok

CATEGORIES

* Raspberry Pi 4

* Pi Camera

* Raspberry-Pi 4 Kits * Raspberry Pi 4 case * Ecrans TFT, LCD pour Raspberry-Pi 4

* Sound cards

* HATs

* Not HATs

* Goodies

* Raspberry PI 3

* Pi Camera

* Raspberry's Kits

* Raspberry Case

* Ecrans TFT, LCD, etc

* Pi ZERO Gadget

* Nano Computers

* Raspberry Pi A & B Plus

* ODroid

* Odroid-XU4

* ODroid-N2

* ODroid-C2

* ODroid-C1+

* ODroid screen

* OlinuXino

* OlinuXino A10 Lime * OlinuXino A20 Lime2 * OlinuXino A20 Micro

* OlinuXino A64

* BeagleBone

* Pine64

* Internet Of Things * WEMOS / LOLIN (ESP)

* Spark.IO

* ESP8266 - module WiFi et plateforme IoT * WiPy, LoPy - IoT en Python * Microcontroler board

* Arduino

* Cartes et Kits

* Shields

* Accessories

* Pico / RP2040

* MicroPython

* PYBStick

* M5Stack (ESP)

* Feather

* A-Star

* Flora & Gemma

* Arduino compatible

* Trinket

* Autres plateformes

* Young Engineers

* MaKey-MaKey

* Micro:bit

* Circuit Playground

* Bare Conductive

* Skill Badge

* RetroGaming

* Motor & robotic

* DC Motor

* Stepper motor

* Servo Motor

* Motor controler

* Robotic prototyping & wheels

* Romi Robot

* MakerBeam / Mechanical / CNC

* MakerBeam

* LEDs / NeoPixels / ElWire * LEDs & LEDs displays * NeoPixels & Dotstar

* ELWire

* Sensor & prototyping * Wire & prototyping * Touch, Flex, Pot, SoftPad

* Switch & button

* Environnemental (Press. Temp. Hum. Gas)

* Temperature

* Movement

* Distance & proximity * Displays, LCD, TFT, OLED

* Printer & Camera

* UEXT

* GRAVITY / Boson

* GROVE

* Various sensors

* Breakout board

* Electronics

* Transistor

* Circuits Intégrés

* Mini kits

* Resistor

* Potentiometer

* Capacité

* Connectors & Headers

* Crimp connector

* Relay modules

* Various

* PSU,Battery,Lipo,...

* Power Supply

* Battery pack

* Lipo & regulator

* Regulator

* Wire & cables

* Wire & prototyping wires * USB Cables & connector * HDMI, Video, Audio cable

* AC Cable

* Banana cables & connectors * BNC cable & connectors

* Case & enclosure

* Tools

* Fer

* Visserie

* Various

* Gift card

* Documentation

INFORMATION

* Home

* Delivery

* Legal Notice

* TVA

* Terms and conditions of use * Conditions d'utilisation

* Secure payment

* About us

* Livraison à prix réduit à partir de 75€ d'achat © 2021 - Ecommerce software by PrestaShopâ„¢

STORE INFORMATION

* MicroControleur Hobby - MC Hobby sprl __Clos de la Giberne, 3

1410 Waterloo

* Disponible au téléphone du LUNDI AU JEUDI DE 11H À 21H, VENDREDI DE 11H À 16H * __From Belgium: +32 (0) 2 387 24 78 * __From France: +33 (0) 359 260 058 * __Email support@mchobby.be

FOLLOW US

MY ACCOUNT

* My orders

* My credit slips

* My addresses

* My personal info

* My vouchers

© Copyright MCHobby SPRL - Tous droits réservés Site internet réalisé par

www.pyranoid.com

★ Commentaires

Popup content starts

Avis par

close Popup

CES AVIS SONT DES AVIS RÉELS

DE CLIENTS RÉELS

4.8 star rating 231 Avis

*

Avis sur le site

*

Avis sur le produit

ÉCRIRE UN AVIS

* Indique un champ requis

* Note:

* Titre:

* Avis:

Vous êtes connecté en tant que Connectez-vous avec:

-OU-

* Utilisez votre nom:

* E-mail:

Le titre et le corps de l'avis ne peuvent rester vides La question ne peut pas être vide Veuillez entrer une évaluation en étoiles pour cet avis Le champ du nom ne peut pas être vide E-mail invalide Votre avis a déjà été soumis. La longueur maximale a été dépassée Veuillez remplir tous les champs obligatoires (*) Une ou plusieurs de vos réponses ne répondent pas aux critères requis Merci d’avoir publié un avis ! Nous apprécions vos commentaires. Partagez votre avis afin que chacun puisse également en profiter.

partager

partager

partager

Merci d’avoir publié un avis ! Votre avis a été envoyé avec succès et se trouve désormais en attente de publication par notre équipe.

G

gratefulfrog@gmail.com Évaluateur vérifié

5.0 star rating

04/06/21

Parfait chaque fois! Review by gratefulfrog@gmail.com on 4 Jun 2021 review stating Parfait

chaque fois!

Comme toujours, grand choix d'objets intéressants, bons prix et un service parfait! Je Recommande! Sur http://shop.mchobby.be partager ' Share Review by gratefulfrog@gmail.com on 4 Jun 2021

_facebook_

facebook Share Review by gratefulfrog@gmail.com on 4 Jun 2021

_twitter_

twitter Share Review by gratefulfrog@gmail.com on 4 Jun 2021

_LinkedIn_

linkedin Share Review by gratefulfrog@gmail.com on 4 Jun 2021

04/06/21

Cet avis vous a-t-il été utile ?

0

0

C

Chloé C.

Évaluateur vérifié

5.0 star rating

31/05/21

Service excellent !

Review by Chloé C. on 31 May 2021 review stating Service excellent ! A l’écoute du client, ce qui est très rare pour une commande en

ligne.

Sur http://shop.mchobby.be partager ' Share Review by Chloé C. on 31 May 2021 _facebook_ facebook Share Review by Chloé C. on 31 May 2021 _twitter_ twitter Share Review by Chloé C. on 31 May 2021 _LinkedIn_ linkedin Share Review by Chloé C. on 31 May 2021

31/05/21

Cet avis vous a-t-il été utile ?

0

0

G

Gilles V.

Évaluateur vérifié

5.0 star rating

17/05/21

Retour d'expérience Review by Gilles V. on 17 May 2021 review stating Retour

d'expérience

Un service impeccable et une livraison rapide. Que demander de plus ? Sur http://shop.mchobby.be partager ' Share Review by Gilles V. on 17 May 2021 _facebook_ facebook Share Review by Gilles V. on 17 May 2021 _twitter_ twitter Share Review by Gilles V. on 17 May 2021 _LinkedIn_ linkedin Share Review by Gilles V. on 17 May 2021

17/05/21

Cet avis vous a-t-il été utile ?

0

0

M

Michael G.

Évaluateur vérifié

5.0 star rating

30/04/21

Parfait et bonne communication Review by Michael G. on 30 Apr 2021 review stating Parfait et bonne

communication

Parfait et bonne communication Sur http://shop.mchobby.be partager ' Share Review by Michael G. on 30 Apr 2021 _facebook_ facebook Share Review by Michael G. on 30 Apr 2021 _twitter_ twitter Share Review by Michael G. on 30 Apr 2021 _LinkedIn_ linkedin Share Review by Michael G. on 30 Apr 2021

30/04/21

Cet avis vous a-t-il été utile ?

0

0

E

Eddy C.

Évaluateur vérifié

5.0 star rating

23/04/21

Très bien !

Review by Eddy C. on 23 Apr 2021 review stating Très bien !

Très bien !

Sur http://shop.mchobby.be partager ' Share Review by Eddy C. on 23 Apr 2021 _facebook_ facebook Share Review by Eddy C. on 23 Apr 2021 _twitter_ twitter Share Review by Eddy C. on 23 Apr 2021 _LinkedIn_ linkedin Share Review by Eddy C. on 23 Apr 2021

23/04/21

Cet avis vous a-t-il été utile ?

0

0

1 2 3 4 5 6 7 8 9

Avis par

Popup content ends