JAMESTOWN DISTRIBUTORS: BOAT BUILDING REPAIR AND PROJECT Marine supplies, boat building, repair and woodworking products including paint, varnish, epoxy, hardware, and more. Tools and inspiration for craftsmen since 1977 BOAT STANDS, JACK STANDS, AND BLOCKS Boat Stands, Jack Stands, and Blocks What is a boat stand? A boat stand (aka jack stand or poppet) is used on land to support the port and starboard sides of a boat while the weight of the boat rests on keel blocks or keel stands. TELEFLEX MARINE STEERING Engine Control Systems. Engine Control Systems can be found on nearly every watercraft that relies upon an engine for propulsion. Mechanical Engine Control Systems consist of a lever control, control cables, engine connection kits with application-specific hardware that connects the cables to the engine throttle and transmission.. Mechanical engine controls are reliable, durable and low in cost.

DOCK HARDWARE

Dock Hardware including corners, connectors, dock bumpers, angle pieces, fasteners and accessories. Hot-Dipped Galvanized pieces. L pins, and more marine hardware by Tie Down Marine. EPOXY FILLERS, THICKENERS AND ADDITIVESWHY ARE ADDITIVES USED WITH EPOXY?ADDING THICKENERS AND FILLERS TO EPOXY WILL CHANGE ITS PHYSICAL PROPERTIES, SOMETIMES DRASTICALLY. FOR EXAMPLE, WITHOUT ADDITIVES, EPOXY OFTEN RUNS...WHAT DO EPOXY ADDITIVES OR FILLERS DO?BY BLENDING IN A SPECIFIC ADDITIVE OR FILLER, AND MIXING IT TO THE DESIRED CONSISTENCY, THE EPOXY CAN BECOME SUITABLE FOR VARIED APPLICATIONS. EXAM...WHAT ARE THE DIFFERENT CONSISTENCIES OF RESIN AND WHAT ARE THEY USED FOR?EPOXY IS TYPICALLY THICKENED TO 4 DIFFERENT CONSISTENCIES TO SUIT A WIDE RANGE OF APPLICATIONS. SYRUP, OR UN-THICKENED EPOXY RESIN WITHOUT FILLERS,...WHAT CAN YOU USE TO THICKEN EPOXY? HOW DO YOU SELECT THE RIGHT EPOXY FILLER?CHOOSING THE RIGHT EPOXY RESIN THICKENER OR FILLER IS KEY TO ACHIEVING YOUR DESIRED RESULT. INSTEAD OF EYEBALLING THE ADDITIVE AMOUNT, FOLLOW THE M...WHAT IS CABOSIL / COLLOIDAL SILICA USED WITH EPOXY FOR?THIS EPOXY THICKENER CONTROLS THE EPOXYS VISCOSITY, AND CREATES A SMOOTH BLEND THAT HELPS TO PREVENT RUNS AND SAGS ON OVERHEAD AND VERTICAL JOINTS....WHAT IS THE DIFFERENCE BETWEEN MICROBALLOONS AND LOW-DENSITY EPOXY FILLER?MICROBALLOONS AND LOW-DENSITY EPOXY FILLER SHARE TWO SIMILARITIES. WHEN ADDED TO EPOXY, BOTH SUBSTANCES HELP TO CREATE A VIABLE FAIRING COMPOUND TH... Epoxy fillers, thickeners and additives when mixed properly create an epoxy system that can be used in a number of different applications: fairing compounds, filleting, blending, bonding and bedding, barrier coating and fiberglassing.

MOELLER DRAIN TUBES

Moeller Drain Tubes are designed to allow water and fluids to flow out. Use a bailer plug to fill the tube when draining is not desired and to prevent water from coming in. These drain tubes are brass and aluminum making them corrosion resistant and have a 90-degree flange. Data Sheets. Flanging Tool Instructions. VIEW. SIKKENS CETOL MARINE APPLICATION APPLICATION: When applying the first coat of Cetol, apply it at a time of day when dew, rain, or other condensation will not affect the cure or finish. The ambient air environment, Cetol product, and wood substrate must be between 50 and 90°F. Avoid applying in direct sunlight, if possible. Do not thin Sikkens Cetol, even on the first

coat.

HOW TO PROPERLY SEAL FUEL FITTINGS AND FUEL LINES Sealing Fuel Fitting Threads. A frequently asked question from DIY boaters is how to seal the pipe threads found on fuel system components. For most components such as a pre-fuel filter (aka fuel water separator) the thread type is typically NPT or NPTF and requires sealant around the threads.NPT is a tapered thread common to plumbing connections in North America, and is also the most common HOW DO I THIN GELCOAT, AND HOW MUCH DO I THIN IT Thinning gelcoat should only be done when it needs to be, such as for spray applications. For most applications, gelcoat should only be thinned with styrene (which creates the very recognizable smell that gelcoat and polyester resin emit). There are also specialty thinning WHAT'S THE DIFFERENCE BETWEEN GELCOAT WITH WAX AND WITHOUT Gelcoat is available with or without wax. To cure properly and completely, gelcoat needs to be devoid of oxygen. Gelcoat with wax has had paraffin wax added to it. When the gelcoat is catalyzed with MEKP, the wax rises to the surface throughout the cure, keeps the air from contacting the gelcoat, and allows the gelcoat to fully cure.If catalyzed with MEKP, gelcoat with wax will cure completely JAMESTOWN DISTRIBUTORS: BOAT BUILDING REPAIR AND PROJECT Marine supplies, boat building, repair and woodworking products including paint, varnish, epoxy, hardware, and more. Tools and inspiration for craftsmen since 1977 BOAT STANDS, JACK STANDS, AND BLOCKS Boat Stands, Jack Stands, and Blocks What is a boat stand? A boat stand (aka jack stand or poppet) is used on land to support the port and starboard sides of a boat while the weight of the boat rests on keel blocks or keel stands. TELEFLEX MARINE STEERING Engine Control Systems. Engine Control Systems can be found on nearly every watercraft that relies upon an engine for propulsion. Mechanical Engine Control Systems consist of a lever control, control cables, engine connection kits with application-specific hardware that connects the cables to the engine throttle and transmission.. Mechanical engine controls are reliable, durable and low in cost.

DOCK HARDWARE

Dock Hardware including corners, connectors, dock bumpers, angle pieces, fasteners and accessories. Hot-Dipped Galvanized pieces. L pins, and more marine hardware by Tie Down Marine. EPOXY FILLERS, THICKENERS AND ADDITIVESWHY ARE ADDITIVES USED WITH EPOXY?ADDING THICKENERS AND FILLERS TO EPOXY WILL CHANGE ITS PHYSICAL PROPERTIES, SOMETIMES DRASTICALLY. FOR EXAMPLE, WITHOUT ADDITIVES, EPOXY OFTEN RUNS...WHAT DO EPOXY ADDITIVES OR FILLERS DO?BY BLENDING IN A SPECIFIC ADDITIVE OR FILLER, AND MIXING IT TO THE DESIRED CONSISTENCY, THE EPOXY CAN BECOME SUITABLE FOR VARIED APPLICATIONS. EXAM...WHAT ARE THE DIFFERENT CONSISTENCIES OF RESIN AND WHAT ARE THEY USED FOR?EPOXY IS TYPICALLY THICKENED TO 4 DIFFERENT CONSISTENCIES TO SUIT A WIDE RANGE OF APPLICATIONS. SYRUP, OR UN-THICKENED EPOXY RESIN WITHOUT FILLERS,...WHAT CAN YOU USE TO THICKEN EPOXY? HOW DO YOU SELECT THE RIGHT EPOXY FILLER?CHOOSING THE RIGHT EPOXY RESIN THICKENER OR FILLER IS KEY TO ACHIEVING YOUR DESIRED RESULT. INSTEAD OF EYEBALLING THE ADDITIVE AMOUNT, FOLLOW THE M...WHAT IS CABOSIL / COLLOIDAL SILICA USED WITH EPOXY FOR?THIS EPOXY THICKENER CONTROLS THE EPOXYS VISCOSITY, AND CREATES A SMOOTH BLEND THAT HELPS TO PREVENT RUNS AND SAGS ON OVERHEAD AND VERTICAL JOINTS....WHAT IS THE DIFFERENCE BETWEEN MICROBALLOONS AND LOW-DENSITY EPOXY FILLER?MICROBALLOONS AND LOW-DENSITY EPOXY FILLER SHARE TWO SIMILARITIES. WHEN ADDED TO EPOXY, BOTH SUBSTANCES HELP TO CREATE A VIABLE FAIRING COMPOUND TH... Epoxy fillers, thickeners and additives when mixed properly create an epoxy system that can be used in a number of different applications: fairing compounds, filleting, blending, bonding and bedding, barrier coating and fiberglassing.

MOELLER DRAIN TUBES

Moeller Drain Tubes are designed to allow water and fluids to flow out. Use a bailer plug to fill the tube when draining is not desired and to prevent water from coming in. These drain tubes are brass and aluminum making them corrosion resistant and have a 90-degree flange. Data Sheets. Flanging Tool Instructions. VIEW. SIKKENS CETOL MARINE APPLICATION APPLICATION: When applying the first coat of Cetol, apply it at a time of day when dew, rain, or other condensation will not affect the cure or finish. The ambient air environment, Cetol product, and wood substrate must be between 50 and 90°F. Avoid applying in direct sunlight, if possible. Do not thin Sikkens Cetol, even on the first

coat.

HOW TO PROPERLY SEAL FUEL FITTINGS AND FUEL LINES Sealing Fuel Fitting Threads. A frequently asked question from DIY boaters is how to seal the pipe threads found on fuel system components. For most components such as a pre-fuel filter (aka fuel water separator) the thread type is typically NPT or NPTF and requires sealant around the threads.NPT is a tapered thread common to plumbing connections in North America, and is also the most common HOW DO I THIN GELCOAT, AND HOW MUCH DO I THIN IT Thinning gelcoat should only be done when it needs to be, such as for spray applications. For most applications, gelcoat should only be thinned with styrene (which creates the very recognizable smell that gelcoat and polyester resin emit). There are also specialty thinning WHAT'S THE DIFFERENCE BETWEEN GELCOAT WITH WAX AND WITHOUT Gelcoat is available with or without wax. To cure properly and completely, gelcoat needs to be devoid of oxygen. Gelcoat with wax has had paraffin wax added to it. When the gelcoat is catalyzed with MEKP, the wax rises to the surface throughout the cure, keeps the air from contacting the gelcoat, and allows the gelcoat to fully cure.If catalyzed with MEKP, gelcoat with wax will cure completely

FIBERGLASS SUPPLIES

Fiberglass, carbon fiber, Kevlar and many other fabrics provide the ultimate in construction options Take advantage of these modern materials when building a boat or other project. Choose from twill weave carbon fiber, plain weave carbon fiber, unidirectional carbon fiber, fiberglass sheets, biaxial fiberglass, fiberglass cloth, fiberglass matting, woven roving, Kevlar tape, Kevlar rolls, and BOAT PAINT & MARINE PAINT Boat Paint. Boaters have been painting their boats since time immemorial. It's an annual pre-season or pre-launch maintenance ritual for many. Here in the northeast, boatyards and marinas that are silent in the winter become hives of activity in early spring with everyone from professional boat painters to do-it-yourselfers getting ready for

the season ahead.

MARINE PLUMBING FITTINGS Marine Plumbing Fittings. Bronze fittings make ideal marine plumbing connections, especially in boats where they are exposed to more corrosive environments like salt water.

CABINET CATCHES

Cabinet catches and elbow catches, available in brass and chrome, give your doors and cabinets a safe fastening mechanism with a classic boat look and feel to it. SANDWICH CORE COMPOSITE MATERIALS Sandwich core construction offers high strength to weight ratios. Sandwich core construction uses lightweight cores with flexural modulus and strength properties far greater than the materials used as skin laminates. Choose from corecell, divinycell, balsa wood, double cut core, grid scored, penske board, and other core materials for

laminating.

EPOXY FILLERS, THICKENERS AND ADDITIVES Epoxy fillers, thickeners and additives when mixed properly create an epoxy system that can be used in a number of different applications: fairing compounds, filleting, blending, bonding and bedding, barrier coating and fiberglassing. MARINE CAULKING AND ADHESIVE SEALANTS Whether you are bedding hardware, sealing portholes, caulking teak decks or beyond, we have the right marine adhesives, caulks, and sealants for your boat.

CATEGORY: FASTENERS

Free shipping on orders over $99.99! Don't miss out! MENU.

1.800.497.0010

BOAT RUB RAIL & GUNWALE BUMPERS A gunwale, also known as a rub rail, is the term commonly used for solid type rail guards, and they serve a dual function on any boat. Primarily, the rub rail offers a fendering surface on the outermost edge of the gunwale, saving structural surfaces and finishes from

impact damage.

CATEGORY: ENGINE ROOM Type. Anode (49) Hydraulic Steering (23) Mechanical Steering (18) Control Cables (16) Fuel Filters (16) Fuel Tanks (13) Oil Change Pumps (13) Fuel Additives (11) JAMESTOWN DISTRIBUTORS: BOAT BUILDING REPAIR AND PROJECT Marine supplies, boat building, repair and woodworking products including paint, varnish, epoxy, hardware, and more. Tools and inspiration for craftsmen since 1977 BOAT STANDS, JACK STANDS, AND BLOCKS Boat Stands, Jack Stands, and Blocks What is a boat stand? A boat stand (aka jack stand or poppet) is used on land to support the port and starboard sides of a boat while the weight of the boat rests on keel blocks or keel stands. DOCK LINES, ROPE AND RUNNING RIGGINGBRAIDED ROPE BRACELET FOR WOMENBRAIDED ROPE NECKLACE FOR MENDOUBLE BRAIDED ROPENYLON BRAIDED

ROPE

Rope, Running Rigging, Docking & Mooring Line and Rope Care explained. Rope for sailors and powerboaters should always considered a raw material. A full spool of marine grade rope is typically 600 feet in length. Once a length of rope is cut from the spool and designated for a particular job on a boat (sheet, halyard, anchor rode, etc.) it then

becomes a Line.

STANDING RIGGING AND LIFELINE HARDWARE Jamestown Distributors offers a wide selection of rigging hardware, tools and supplies. We offer do-it-yourself lifeline kits from Suncor Stainless along with all of AWLGRIP 545 EPOXY PRIMER Awlgrip 545 is a two-component epoxy primer system with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates above or below the waterline. BALTEK AIREX PXC BOARDS Airex PXc Board is high density, glass-reinforced urethane foam panel. Applications include rotted plywood transom replacement in outboard motor installations. Also used as a foam or balsa core replacement when thru-bolting deck hardware, plywood replacement for small-boat cockpit soles, under-deck autopilot installations etc WHAT'S THE DIFFERENCE BETWEEN GELCOAT WITH WAX AND WITHOUTCAN YOU EAT CANNABIS WAXHOW DO YOU SMOKE WAXHOW TO USE CANNABIS WAXHOW TO USE MARIJUANA WAXWHAT IS WAX MADE OF Gelcoat is available with or without wax. To cure properly and completely, gelcoat needs to be devoid of oxygen. Gelcoat with wax has had paraffin wax added to it. When the gelcoat is catalyzed with MEKP, the wax rises to the surface throughout the cure, keeps the air from contacting the gelcoat, and allows the gelcoat to fully cure.If catalyzed with MEKP, gelcoat with wax will cure completely SIKKENS CETOL MARINE APPLICATION Many customers love the ease of use for Sikkens Cetol, and the different finish tones that are offered. Cetol boasts that it allows the wood to breathe, and does not require sanding between coats if reapplied within a specific time frame. HOW DO I THIN GELCOAT, AND HOW MUCH DO I THIN IT Thinning gelcoat should only be done when it needs to be, such as for spray applications. For most applications, gelcoat should only be thinned with styrene (which creates the very recognizable smell that gelcoat and polyester resin emit). There are also specialty thinning HOW TO PROPERLY SEAL FUEL FITTINGS AND FUEL LINESHOW DO SHARKBITE FITTINGS SEALFACE SEAL HYDRAULIC FITTINGSCONDUIT SEAL FITTINGTEFLON TAPE ON GASOLINE FITTINGSFUEL FITTING THREAD SEALANTFUEL LINE FITTING

THREAD SEALER

Sealing Fuel Fitting Threads. A frequently asked question from DIY boaters is how to seal the pipe threads found on fuel system components. For most components such as a pre-fuel filter (aka fuel water separator) the thread type is typically NPT or NPTF and requires sealant around the threads.NPT is a tapered thread common to plumbing connections in North America, and is also the most common JAMESTOWN DISTRIBUTORS: BOAT BUILDING REPAIR AND PROJECT Marine supplies, boat building, repair and woodworking products including paint, varnish, epoxy, hardware, and more. Tools and inspiration for craftsmen since 1977 BOAT STANDS, JACK STANDS, AND BLOCKS Boat Stands, Jack Stands, and Blocks What is a boat stand? A boat stand (aka jack stand or poppet) is used on land to support the port and starboard sides of a boat while the weight of the boat rests on keel blocks or keel stands. DOCK LINES, ROPE AND RUNNING RIGGINGBRAIDED ROPE BRACELET FOR WOMENBRAIDED ROPE NECKLACE FOR MENDOUBLE BRAIDED ROPENYLON BRAIDED

ROPE

Rope, Running Rigging, Docking & Mooring Line and Rope Care explained. Rope for sailors and powerboaters should always considered a raw material. A full spool of marine grade rope is typically 600 feet in length. Once a length of rope is cut from the spool and designated for a particular job on a boat (sheet, halyard, anchor rode, etc.) it then

becomes a Line.

STANDING RIGGING AND LIFELINE HARDWARE Jamestown Distributors offers a wide selection of rigging hardware, tools and supplies. We offer do-it-yourself lifeline kits from Suncor Stainless along with all of AWLGRIP 545 EPOXY PRIMER Awlgrip 545 is a two-component epoxy primer system with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates above or below the waterline. This two part system consists of a base and converter, and is used to seal filler primers and fairing work before applying topcoats. The correct primer for both

Awlgrip

BALTEK AIREX PXC BOARDS Airex PXc Board is high density, glass-reinforced urethane foam panel. Applications include rotted plywood transom replacement in outboard motor installations. Also used as a foam or balsa core replacement when thru-bolting deck hardware, plywood replacement for small-boat cockpit soles, under-deck autopilot installations etc SIKKENS CETOL MARINE APPLICATION APPLICATION: When applying the first coat of Cetol, apply it at a time of day when dew, rain, or other condensation will not affect the cure or finish. The ambient air environment, Cetol product, and wood substrate must be between 50 and 90°F. Avoid applying in direct sunlight, if possible. Do not thin Sikkens Cetol, even on the first

coat.

WHAT'S THE DIFFERENCE BETWEEN GELCOAT WITH WAX AND WITHOUTCAN YOU EAT CANNABIS WAXHOW DO YOU SMOKE WAXHOW TO USE CANNABIS WAXHOW TO USE MARIJUANA WAXWHAT IS WAX MADE OF Gelcoat is available with or without wax. To cure properly and completely, gelcoat needs to be devoid of oxygen. Gelcoat with wax has had paraffin wax added to it. When the gelcoat is catalyzed with MEKP, the wax rises to the surface throughout the cure, keeps the air from contacting the gelcoat, and allows the gelcoat to fully cure.If catalyzed with MEKP, gelcoat with wax will cure completely HOW DO I THIN GELCOAT, AND HOW MUCH DO I THIN IT Thinning gelcoat should only be done when it needs to be, such as for spray applications. For most applications, gelcoat should only be thinned with styrene (which creates the very recognizable smell that gelcoat and polyester resin emit). There are also specialty thinning HOW TO PROPERLY SEAL FUEL FITTINGS AND FUEL LINESHOW DO SHARKBITE FITTINGS SEALFACE SEAL HYDRAULIC FITTINGSCONDUIT SEAL FITTINGTEFLON TAPE ON GASOLINE FITTINGSFUEL FITTING THREAD SEALANTFUEL LINE FITTING

THREAD SEALER

Sealing Fuel Fitting Threads. A frequently asked question from DIY boaters is how to seal the pipe threads found on fuel system components. For most components such as a pre-fuel filter (aka fuel water separator) the thread type is typically NPT or NPTF and requires sealant around the threads.NPT is a tapered thread common to plumbing connections in North America, and is also the most common BOAT PAINT & MARINE PAINT Boat Paint. Boaters have been painting their boats since time immemorial. It's an annual pre-season or pre-launch maintenance ritual for many. Here in the northeast, boatyards and marinas that are silent in the winter become hives of activity in early spring with everyone from professional boat painters to do-it-yourselfers getting ready for

the season ahead.

FIBERGLASS SUPPLIES

Fiberglass, carbon fiber, Kevlar and many other fabrics provide the ultimate in construction options Take advantage of these modern materials when building a boat or other project. Choose from twill weave carbon fiber, plain weave carbon fiber, unidirectional carbon fiber, fiberglass sheets, biaxial fiberglass, fiberglass cloth, fiberglass matting, woven roving, Kevlar tape, Kevlar rolls, and EPOXY RESIN AND ADHESIVES We specialize in epoxy resin, epoxy hardener, epoxy filler, and marine adhesives from WEST System Epoxy, System Three Resins, Inc., and MAS Epoxies. We also sell many marine adhesives and other types of marine epoxy adhesive and epoxy glue compounds. (page 10/19) TOTALBOAT - JAMESTOWN DISTRIBUTORS Introducing TotalBoat At Jamestown Distributors, we focus on having the right products, people, and technology to ensure our customers get the most out of their relationships with their boats. MARINE PLUMBING FITTINGS Marine Plumbing Fittings. Bronze fittings make ideal marine plumbing connections, especially in boats where they are exposed to more corrosive environments like salt water. DOCK CLEATS AND BOAT CLEATS Dock cleat and boat cleats are either made out of stainless steel, bronze or galvanized metal. A variety of cleat styles are designed to match your needs and ideals in line and rope cleats. A reliable dock cleat and boat cleat accessory supplier. BOAT RUB RAIL & GUNWALE BUMPERS A gunwale, also known as a rub rail, is the term commonly used for solid type rail guards, and they serve a dual function on any boat. Primarily, the rub rail offers a fendering surface on the outermost edge of the gunwale, saving structural surfaces and finishes from

impact damage.

DOCK HARDWARE

Dock Hardware including corners, connectors, dock bumpers, angle pieces, fasteners and accessories. Hot-Dipped Galvanized pieces. L pins, and more marine hardware by Tie Down Marine.

CATEGORY: FASTENERS

Free shipping on orders over $99.99! Don't miss out! MENU.

1.800.497.0010

CATEGORY: PAINTS

Free shipping on orders over $99.99! Don't miss out! MENU.

1.800.497.0010

Free shipping on orders over $99.99! Don't miss out!

__

MENU

__1.800.497.0010 __

____ $0.00

__

Free shipping on orders over $99.99! Don't miss out!

__

SHOPTOTALBOAT PRODUCT SUPPORT

PROJECT

GUIDES JDPRO

Anchoring and Docking__ Cleaning and Polishing__ Electrical__ Engine Room__ Epoxy and Adhesives__ Fasteners__ Fiberglass and Building Materials__

Hardware__

JD Apparel__ Painting

Supplies__ Paints__

Plumbing__ Storage and Winterization__ Tools__

Anchors and Chain

Buoys and Fenders

Cleats

Dock Accessories

Dock Hardware

Flotation Safety

Gunwale Guards

Rope and Running

Rigging Swim

Platforms and Boarding Ladders

Windlasses

and Accessories

VIEW FULL CATEGORY

__1.800.497.0010

____

__Login

__My Orders __Account Info

__My Wishlists __My

Addresses __My Payments

__Support

__Logout

__  $0.00

Your Shopping Cart

YOUR CART IS CURRENTLY EMPTY Oops, it looks like you don’t have anything in your cart. Add some items and try again.

Continue Shopping

__

__CLOSE__ 1.800.497.0010 ANCHORING AND DOCKING__CLEANING AND POLISHING__ELECTRICAL__ENGINE ROOM__EPOXY AND ADHESIVES__FASTENERS__FIBERGLASS AND BUILDING MATERIALS__HARDWARE__JD APPAREL__PAINTING SUPPLIES__PAINTS__PLUMBING__STORAGE AND WINTERIZATION__TOOLS__

BACK

ANCHORS AND CHAIN

BUOYS AND FENDERS

CLEATS

DOCK ACCESSORIES

DOCK HARDWARE

FLOTATION SAFETY

GUNWALE GUARDS

ROPE AND RUNNING

RIGGING SWIM

PLATFORMS AND BOARDING LADDERS

WINDLASSES

AND ACCESSORIES

VIEW FULL CATEGORY Totalboat

Product Support

Project

Guides JDPro

Login Shopping Cart

__CLOSE

__ My Orders __ Account Info __ My Wishlists __ My Addresses __ My Payments

__ Support__ Logout

TOOLS & INSPIRATION FOR CRAFTSMEN

Shop Now

Top Categories

PAINTS

EPOXY AND ADHESIVES

FASTENERS

FIBERGLASS AND BUILDING MATERIALS

Top Products

Previous

TotalBoat

TOTALBOAT HIGH PERFORMANCE EPOXY KITS _Starting at $33.99___________(4.7)

Epifanes

EPIFANES CLEAR HIGH-GLOSS MARINE VARNISH _Starting at $18.93___________(4.8)

WEST System

WEST SYSTEM 105 EPOXY RESIN _Starting at $46.87___________(4.8)

TotalBoat

TOTALBOAT TOTALFAIR EPOXY FAIRING COMPOUND _Starting at $36.99___________(4.7)

3M

3M 5200 MARINE ADHESIVE SEALANT _Starting at $10.47___________(4.7)

TotalBoat

TOTALBOAT TABLETOP EPOXY _Starting at $49.99___________(4.9)

EC Cutter

EC CUTTER ELECTRIC CORDLESS SCISSORS _Starting at $___________(4.5) Jamestown Distributors

CHIP BRUSHES

_Starting at $5.64___________(4.7) Jamestown Distributors

PLASTIC PAINT PAILS

_Starting at $3.49___________(4.6)

TotalBoat

TOTALBOAT WET EDGE TOPSIDE PAINT _Starting at $0___________(4.6)Next

Totalboat

Explore the most comprehensive lineup of marine maintenance & repair solutions available. DIY makers & woodworkers prefer TotalBoat products for their ease of use and marine-grade durability

SHOP NOW

Popular Brands

About Us

Our mission is to provide Tools and Inspiration for Craftsmen. We've been supplying building & maintenance products to boaters, builders & DIY makers since 1977. We love to help people build stuff!

Learn More

24/7 Support

Need help or have questions? The FAQs in our Help Center cover most account, order, or product-related topics. Click to call or chat with our Total Support Team. Live ChatHelp Center OR CALL 1.800.497.0010

__

Free Shipping!

Free shipping on orders over $99! Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi nisl ex, iaculis ut ante nec, vulputate consequat risus.

Shop Now

OUR COMPANY

About Us

Jobs

INFO

Shipping

Returns

Payment Info

FAQs

Contact Us

SUPPORT

Product Support

Help Center

STAY CONNECTED

__ __

__

__

Privacy Policy

Credit Card Policy

Cookie Policy

© 2021 Jamestown Distributors, Inc. All Rights reserved.

Privacy Policy

Credit Card Policy

Cookie Policy

__

Login

Email

Email

Password

Password

Forgot Password?

LoginCreate Account

By signing into your account, you represent that you have read and

agree to our Terms

and our Privacy Policy Search results for ""

SIGN UP & GET

5% OFF

YOUR ORDER!

Sign up for our newsletter to receive special offers, expert advice, and a 5% OFF coupon for your next order*

Email Address

No thanks

*OFFER VALID FOR NEW SUBSCRIBERS ONLY. SOME PRODUCT EXCLUSIONS APPLY.