Franklin Fueling Systems - Home - Franklin Fueling Systems

More Annotations

Favourite Annotations

Text

FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling. UNIVERSAL LIQUID SUMP FMP-ULS. Universal liquid sump sensor (all EVO™ Series ATGs) TSP-KI2. Interstitial sensor riser cap kit for 2" riser pipes. TSP-ULS. Universal liquid sump sensor (for use with S940 only) Note: This sensor communciates to the ATG using 2 wires on the 2-wire sensor modules or the 3-wire sensor module. It cannot be wired to the probe

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

Variable speed models are available in variable lengths only. Check valve: 2¾" diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer. Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model

relieves at

EBW® COMPOSITE MANWAYS EBW® fiber reinforced composite manways are ultra lightweight and engineered and tested to exceed D.O.T. H20 load ratings. Covers weigh almost one-third less than steel which dramatically reduces injury potential during cover removal. Available in 12", 30", 36" and 42"

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

900 SERIES EVR

900 Series EVR. HEALY™ brand 900 Series EVR (enhanced vapor recovery) nozzles are the most efficient and durable gasoline nozzles on the market today. The state-of-the-art smart interface design will automatically detect whether a vehicle is equipped with Onboard Refueling Vapor Recovery (ORVR) to prevent clean air from being pulled

back into

LINE LEAK DETECTOR

SINGLE LINE LEAK DETECTION. The TS-LLD line leak detector uses patented, flow-based technology to perform multiple line tightness tests. The TS-LLD leak detector performs gross leak tests after each 3.0 gph dispense, the monthly 0.2 gph test and the annual 0.1 gph

test.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

LINE LEAK DETECTOR

test.

900 SERIES EVR

back into

ATG SELECTION

When you fully understand both your current site needs and where you might be headed in the future, you are able to make a sound Automatic Tank Gauge (ATG) selection. Be sure to address your compliance needs and operational requirements when considering which ATG is right for you. The EVO™ Series family of ATGs offers four different options with right-sized features to meet the requirements FIBERGLASS LARGE MOUTH Conduitless. LMM-3914-36-W-S. 3600 Series fiberglass large mouth dispenser sumps. Conduitless. For “ (S/D)” insert “S” for single wall or “D” for double wall. Fiberglass models include base and top. Consult Customer Service to verify lead time on all double wall dispenser sumps. SUBMERSIBLE TURBINE PUMP KITS 403479901. 60 Hz, three phase, VL2 102" - 166" (2,590 mm - 4,215 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) Variable length column pipe kit reduces from 2" NPT column pipe at the top to an 1½" NPT XP FLEXIBLE PIPEWORK XP Flexible Pipework. APT® XP pipework provides a highly flexible pipework solution that makes installation simple and easy in any weather condition or site configuration. XP pipework can be used in both pressure and suction applications, and is ideal for underground service station fuel delivery systems. XP pipe is offered in 1”, 1

�”, 1

MECHANICAL LEAK DETECTORS Mechanical Leak Detectors. FE Petro™ brand MLD+ mechanical leak detectors provide precise leak detection for standard fuel and biofuel applications on 4" submersible turbine pumps. All models are capable of detecting line leaks equivalent to 3 gph at 10 psi (11.4 lph @ 0.70

bar). Highlights.

402 SERIES UTILITY

402 Series Utility. The economical EBW™ brand 402 Series utility nozzle is constructed of high tensile strength aluminum alloy. Its angled design allows more efficient fueling positions by reducing hose wear and pinch points. For use with gasoline, diesel and Ethanol

blends up to E15.

Fueling Systems

activated.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

900 SERIES EVR

back into

LINE LEAK DETECTOR

test.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

900 SERIES EVR

back into

LINE LEAK DETECTOR

test.

ATG SELECTION

�”, 1

bar). Highlights.

402 SERIES UTILITY

blends up to E15.

Fueling Systems

activated.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

900 SERIES EVR

back into

LINE LEAK DETECTOR

test.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights.

900 SERIES EVR

back into

LINE LEAK DETECTOR

test.

ATG SELECTION

�”, 1

bar). Highlights.

402 SERIES UTILITY

blends up to E15.

Fueling Systems

activated.

VARIABLE SPEED

relieves at

EVO™ 550 & EVO™ 5000 Relay output channels: 24 (EVO™ 550) / 24 (EVO™ 5000) Connectivity: Ethernet, RS-485, standard USB (qty 2) Display type: 7” (17.78 cm) color LCD touch screen. Printer type: Thermal (also network or USB) Alarm: Internal audible alarm. LEDs: Alarm, warning,

and

1 ½ HP PUMPS

module.

LINE LEAK DETECTOR

test.

OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling.

VARIABLE SPEED

relieves at

and

1 ½ HP PUMPS

module.

LINE LEAK DETECTOR

test.

OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will PRODUCTS | FRANKLIN FUELING SYSTEMS Products. Franklin Fueling Systems can deliver a complete package of pipework, manhole chambers, under dispenser containment, submersible pumps and intelligent fuel stock & environmental monitoring systems all designed around your exact needs and delivered in

⅓ & ¾ HP PUMPS

Franklin Fueling Systems is an ISO 9001 Certified Manufacturer. General. ⅓ and ¾ Hp fixed speed models are available in variable length and fixed length options. Check valve: 2¾" diameter fluorocarbon seal constructed with cast aluminum body and steel

backing washer.

POINT-OF-SALE

Point-of-Sale Data Circuit Protector with (2) current loop protectors, modular plug. Replacement Individual Point-of-Sale Data Protection Modules. Model Number. Description. DCP-AM8CL. Replacement module for individual Point-of-Sale data protector, single current loop circuit, 50V, in-line with modular 8 pin connectors with cable. DCP-AM8-232. PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights. SUBMERSIBLE TURBINE PUMP KITS 403479901. 60 Hz, three phase, VL2 102" - 166" (2,590 mm - 4,215 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) Variable length column pipe kit reduces from 2" NPT column pipe at the top to an 1½" NPT

GRADE LEVEL

900 SERIES EVR

back into

sizes.

SINGLE WALL RIGID ENTRY BOOT Single Wall Rigid Entry Boot. APT® ducted and non-ducted rigid entry boots allow you to connect XP double wall flexible pipe to single wall containment sumps with an unsurpassed level of installation ease, while also completely removing exposed rubber from the connection. The interior pipe seal compresses onto the pipe, providing watertight NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling.

VARIABLE SPEED

relieves at

2 HP PUMPS | FRANKLIN FUELING SYSTEMS 2 Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 40 microfarad. STP-SCI single-phase Smart Controllers and STP-CBS single-phase control boxes are available for 2 hp pump control. Max. motor draw: 12 Amps. 50 Hz Fixed Speed Power Requirements. FIBERGLASS LARGE MOUTH Conduitless. LMM-3914-36-W-S. 3600 Series fiberglass large mouth dispenser sumps. Conduitless. For “ (S/D)” insert “S” for single wall or “D” for double wall. Fiberglass models include base and top. Consult Customer Service to verify lead time on all double wall dispenser sumps. HIGH CAPACITY 3 AND 5 HP 50 Hz high capacity pump models are available in 3 hp and 5 hp versions. STP-SCIIIC three-phase smart controllers and STPCBB3C and STP-CBB5C three-phase control boxes are available for high capacity pump control. Pump Motor - 60Hz. Fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with built-in, automatic, thermal overload

protection.

EVO™ 200 & EVO™ 400 EVO™ 200 and EVO™ 400 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG. Internal Hardware Options (200/400) Model Number. UNIVERSAL LIQUID SUMP FMP-ULS. Universal liquid sump sensor (all EVO™ Series ATGs) TSP-KI2. Interstitial sensor riser cap kit for 2" riser pipes. TSP-ULS. Universal liquid sump sensor (for use with S940 only) Note: This sensor communciates to the ATG using 2 wires on the 2-wire sensor modules or the 3-wire sensor module. It cannot be wired to the probe

module.

LINE LEAK DETECTOR

test.

ELECTRONIC LINE LEAK DETECTION Electronic Line Leak Detection. Electronic Line Leak Detection (ELLD) is an optional software feature available on EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000, that allows you to connect your fuel management system with your pipework system to detect leaks through a transducer device installed in the submersible pump. Highlights. OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling.

VARIABLE SPEED

relieves at

protection.

UNIVERSAL LIQUID SUMP FMP-ULS. Universal liquid sump sensor (all EVO™ Series ATGs) TSP-KI2. Interstitial sensor riser cap kit for 2" riser pipes. TSP-ULS. Universal liquid sump sensor (for use with S940 only) Note: This sensor communciates to the ATG using 2 wires on the 2-wire sensor modules or the 3-wire sensor module. It cannot be wired to the probe

module.

LINE LEAK DETECTOR

test.

ELECTRONIC LINE LEAK DETECTION Electronic Line Leak Detection. Electronic Line Leak Detection (ELLD) is an optional software feature available on EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000, that allows you to connect your fuel management system with your pipework system to detect leaks through a transducer device installed in the submersible pump. Highlights. OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will PRODUCTS | FRANKLIN FUELING SYSTEMS Products. Franklin Fueling Systems can deliver a complete package of pipework, manhole chambers, under dispenser containment, submersible pumps and intelligent fuel stock & environmental monitoring systems all designed around your exact needs and delivered in EVO™ 200 & EVO™ 400 EVO™ 200 and EVO™ 400 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG. Internal Hardware Options (200/400) Model Number.

REPLACEMENT PARTS

Replacement Parts. There are a wide variety of FE Petro™ brand repair parts for both 4" and 6" submersible turbine pumps and controllers that can be used as replacement parts on competitive model submersible pumps. There are several replacement pump motor assemblies which are designed specifically to bolt on to existing Red-Jacket™

brand pumps.

FIBERGLASS LARGE MOUTH Conduitless. LMM-3914-36-W-S. 3600 Series fiberglass large mouth dispenser sumps. Conduitless. For “ (S/D)” insert “S” for single wall or “D” for double wall. Fiberglass models include base and top. Consult Customer Service to verify lead time on all double wall dispenser sumps. EVO™ 550 & EVO™ 5000 Relay output channels: 24 (EVO™ 550) / 24 (EVO™ 5000) Connectivity: Ethernet, RS-485, standard USB (qty 2) Display type: 7” (17.78 cm) color LCD touch screen. Printer type: Thermal (also network or USB) Alarm: Internal audible alarm. LEDs: Alarm, warning,

and

⅓ & ¾ HP PUMPS

backing washer.

FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, a Dispenser Interface Module must be installed in the ATG to provide the appropriate communication capabilities and physical cable connection to the Forecourt Controller or Point-of-Sale device. NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates SUBMERSIBLE TURBINE PUMP KITS 403479901. 60 Hz, three phase, VL2 102" - 166" (2,590 mm - 4,215 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) Variable length column pipe kit reduces from 2" NPT column pipe at the top to an 1½" NPT FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling.

VARIABLE SPEED

relieves at

protection.

module.

LINE LEAK DETECTOR

test.

VARIABLE SPEED

relieves at

protection.

module.

LINE LEAK DETECTOR

test.

ELECTRONIC LINE LEAK DETECTION Electronic Line Leak Detection. Electronic Line Leak Detection (ELLD) is an optional software feature available on EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000, that allows you to connect your fuel management system with your pipework system to detect leaks through a transducer device installed in the submersible pump. Highlights. OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will PRODUCTS | FRANKLIN FUELING SYSTEMS Products. Franklin Fueling Systems can deliver a complete package of pipework, manhole chambers, under dispenser containment, submersible pumps and intelligent fuel stock & environmental monitoring systems all designed around your exact needs and delivered in EVO™ 200 & EVO™ 400 EVO™ 200 and EVO™ 400 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG. Internal Hardware Options (200/400) Model Number.

REPLACEMENT PARTS

brand pumps.

and

⅓ & ¾ HP PUMPS

backing washer.

FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, a Dispenser Interface Module must be installed in the ATG to provide the appropriate communication capabilities and physical cable connection to the Forecourt Controller or Point-of-Sale device. NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates SUBMERSIBLE TURBINE PUMP KITS 403479901. 60 Hz, three phase, VL2 102" - 166" (2,590 mm - 4,215 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) Variable length column pipe kit reduces from 2" NPT column pipe at the top to an 1½" NPT FRANKLIN FUELING SYSTEMS We offer the world's most complete line of petroleum equipment including Submersible Pumping Systems, Piping & Containment Systems, Service Station Hardware, Dispensing Systems, Fuel Management Systems and Transport Systems.

VARIABLE SPEED

Variable speed pumps are controlled by the MagVFC™ variable frequency controller which provides control for both 2 Hp and 4 Hp variable speed submersible turbine pumps. ) UNIVERSAL LIQUID SUMP Based on float-switch technology and made of chemically-resistant materials, the ULS is a low-cost sensor that can be installed in sumps, dispenser pans, ste EBW® COMPOSITE MANWAYS EBW® fiber reinforced composite manways are ultra lightweight and engineered and tested to exceed D.O.T. H20 load ratings. Covers weigh almost one-third less than steel which dramatically reduces injury potential during cover removal.

GRADE LEVEL

The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel an

LINE LEAK DETECTOR

test.

900 SERIES EVR

HEALY™ brand 900 Series EVR (enhanced vapor recovery) nozzles are the most efficient and durable gasoline nozzles on the market today. The state-of-the-art smart interface design will automatically detect whether a vehicle is equipped with Onboard Refueling Vapor Recovery (ORVR) to prevent clean air from being pulled back into the storage tank, protecting the station owner’s fuel assets. ELECTRONIC LINE LEAK DETECTION Electronic Line Leak Detection (ELLD) is an optional software feature available on EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000, that allows you to connect PRODUCT SHEAR VALVES Model Number Description; 662500201: Shear Valve Top Union 1.5" 662500202: Shear Valve Top Female 1.5" NPT. 662500203: Shear Valve Top Male 1.5" NPT. 662501201 PRESSURE REGULATOR VALVE The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressur FRANKLIN FUELING SYSTEMS We offer the world's most complete line of petroleum equipment including Submersible Pumping Systems, Piping & Containment Systems, Service Station Hardware, Dispensing Systems, Fuel Management Systems and Transport Systems.

VARIABLE SPEED

GRADE LEVEL

The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel an

LINE LEAK DETECTOR

test.

900 SERIES EVR

HEALY™ brand 900 Series EVR (enhanced vapor recovery) nozzles are the most efficient and durable gasoline nozzles on the market today. The state-of-the-art smart interface design will automatically detect whether a vehicle is equipped with Onboard Refueling Vapor Recovery (ORVR) to prevent clean air from being pulled back into the storage tank, protecting the station owner’s fuel assets. ELECTRONIC LINE LEAK DETECTION Electronic Line Leak Detection (ELLD) is an optional software feature available on EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000, that allows you to connect PRODUCT SHEAR VALVES Model Number Description; 662500201: Shear Valve Top Union 1.5" 662500202: Shear Valve Top Female 1.5" NPT. 662500203: Shear Valve Top Male 1.5" NPT. 662501201 PRESSURE REGULATOR VALVE The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressur PRODUCTS | FRANKLIN FUELING SYSTEMS Products. Franklin Fueling Systems can deliver a complete package of pipework, manhole chambers, under dispenser containment, submersible pumps and intelligent fuel stock & environmental monitoring systems all designed around your exact needs and delivered in one shipment, ready for installation.

ATG SELECTION

1 ½ HP PUMPS

General. 1½ Hp fixed speed models are available in variable length and fixed length options. Check valve: 2¾" diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. EVO™ 550 & EVO™ 5000 EVO™ 550 & EVO™ 5000 Automatic Tank Gauges (ATGs) provide highly accurate inventory management and full-featured compliance monitoring

for any size fuel

FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, a Dispenser Interface Module must be installed in the ATG to provide the appropriate communication capabilities and physical cable connection to the Forecourt Controller or Point-of-Sale device. SUBMERSIBLE TURBINE PUMP KITS Submersible Turbine Pump Kit. All stainless steel hardware and Viton® or EPDM seals; Bypass relief valve cracking pressure of 30-40 psi (2.1-2.8 bar) and 4 gpm (15 NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates FIBERGLASS LARGE MOUTH Designed for the installer, single and double wall large mouth fiberglass dispenser sumps provide easy access to piping connections. The dispenser frame and top are factory assembled and field glassed onto the sump after piping connections are completed. FRANKLIN FUELING SYSTEMS At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YouTube. FranklinFueling.

ATG SELECTION

CLAMSHELL SWIVEL

100 psi rated working pressure. Stainless steel fittings are biofuel approved (E85 and biodiesel). Approvals/Certifications. cULus listed. Model Number. Description. MS-XP-150-150. Brass XP pipe clamshell swivel fitting, installs on the end of 1½" single/secondary EVO™ 200 & EVO™ 400 EVO™ 200 and EVO™ 400 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG. Internal Hardware Options (200/400) Model Number. SERVICE STATION HARDWARE P/Vacuum Vents. Open Atmosphere Tank Vents. Aboveground Emergency Vents. Downward Tank Vent. Anti Syphon Valves. Warden® Overfill Prevention Valve. AST

VARIABLE SPEED

relieves at

module.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will NEW: GUARDIAN SERIES FIXED SPEED PUMP CONTROLLER The Guardian Series™ single-phase controller takes a major leap forward in fixed speed Submersible Turbine Pump (STP) control. Built upon the solid FE PETRO® brand smart controller platform, Guardian Series™ controllers feature an enhanced user interface, greater functionality, and higher performance compared to standard control

boxes.

ATG SELECTION

CLAMSHELL SWIVEL

VARIABLE SPEED

relieves at

module.

GRADE LEVEL

Grade Level. The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. OVERFILL PREVENTION VALVE The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will NEW: GUARDIAN SERIES FIXED SPEED PUMP CONTROLLER The Guardian Series™ single-phase controller takes a major leap forward in fixed speed Submersible Turbine Pump (STP) control. Built upon the solid FE PETRO® brand smart controller platform, Guardian Series™ controllers feature an enhanced user interface, greater functionality, and higher performance compared to standard control

boxes.

PRODUCTS | FRANKLIN FUELING SYSTEMS Products. Franklin Fueling Systems can deliver a complete package of pipework, manhole chambers, under dispenser containment, submersible pumps and intelligent fuel stock & environmental monitoring systems all designed around your exact needs and delivered in FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series ATGs or as a field upgrade option, Flow Rate Monitoring delivers ongoing flow rate performance data, flow rates for each fueling point, and provides a notification SERVICE STATION HARDWARE Once installation has completed, we’re just getting started. We connect you to vital operational and performance information from your sites, enabling data-driven FLEXIBLE | FRANKLIN FUELING SYSTEMS Flexible. APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. FIBERGLASS LARGE MOUTH Conduitless. LMM-3914-36-W-S. 3600 Series fiberglass large mouth dispenser sumps. Conduitless. For “ (S/D)” insert “S” for single wall or “D” for double wall. Fiberglass models include base and top. Consult Customer Service to verify lead time on all double wall dispenser sumps. NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, a Dispenser Interface Module must be installed in the ATG to provide the appropriate communication capabilities and physical cable connection to the Forecourt Controller or Point-of-Sale device. MECHANICAL LEAK DETECTORS Mechanical Leak Detectors. FE Petro™ brand MLD+ mechanical leak detectors provide precise leak detection for standard fuel and biofuel applications on 4" submersible turbine pumps. All models are capable of detecting line leaks equivalent to 3 gph at 10 psi (11.4 lph @ 0.70

bar). Highlights.

and

module.

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

LINE LEAK DETECTOR

test.

XP FLEXIBLE PIPEWORK XP Flexible Pipework. APT® XP pipework provides a highly flexible pipework solution that makes installation simple and easy in any weather condition or site configuration. XP pipework can be used in both pressure and suction applications, and is ideal for underground service station fuel delivery systems. XP pipe is offered in 1”, 1

�”, 1

900 SERIES EVR

back into

PRODUCT SHEAR VALVES Product Shear Valves. EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet. Highlights. PRESSURE REGULATOR VALVE Pressure Regulator Valve. The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressure regulator valve prevents fuel from flowing to the pumping unit and flowing out the vent tube of the self-contained dispenser when the pump is not

activated.

module.

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

LINE LEAK DETECTOR

test.

�”, 1

900 SERIES EVR

back into

activated.

ATG SELECTION

VARIABLE SPEED

relieves at

1 ½ HP PUMPS

1½ Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power. 1½ Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 15 microfarad. STP-SCI single-phase Smart Controllers and STP-CBS single-phase control boxes are available for 1½ Hp. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. FIBERGLASS LARGE MOUTH Conduitless. LMM-3914-36-W-S. 3600 Series fiberglass large mouth dispenser sumps. Conduitless. For “ (S/D)” insert “S” for single wall or “D” for double wall. Fiberglass models include base and top. Consult Customer Service to verify lead time on all double wall dispenser sumps. EVO™ 200 & EVO™ 400 EVO™ 200 and EVO™ 400 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG. Internal Hardware Options (200/400) Model Number. FLOW RATE MONITORING With this method of achieving Flow Rate Monitoring, a Dispenser Interface Module must be installed in the ATG to provide the appropriate communication capabilities and physical cable connection to the Forecourt Controller or Point-of-Sale device. NEW: EVO™ SERIES FLOW RATE MONITORING Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series Automatic Tank Gauges (ATGs) or as a field upgrade option on existing ATGs, Flow Rate Monitoring delivers ongoing flow rate performance data including flow rates SUBMERSIBLE TURBINE PUMP KITS 403479901. 60 Hz, three phase, VL2 102" - 166" (2,590 mm - 4,215 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) Variable length column pipe kit reduces from 2" NPT column pipe at the top to an 1½" NPT COOKIES: Our website uses cookies for analytics and to enable dynamic content. Learn More ×

* Home

* Plan

* Build

* Maintain

* Products

* This is Franklin

* Support

*

Search

* Get A Quote

* ACQUISITION: Power Integrity Services, LLC

Get a Quote

* Home

* Plan

LEARN

Get Certified

DESIGN

Get a Quote

FIND

Where to Buy

If you need to get certified in installation, build a quote to your exact specification or with expert help to optimize for lowest total cost of ownership, then let us help your team as you build your site.

* Build

TRACK

Track Your Order

CHOOSE

Find an Installer

VERIFY

Verify Your Install

When design becomes reality, we’re there to ensure every piece of equipment successfully makes it from our shipping dock to its final installation destination within your underground fuel system.

* Maintain

CONNECT

Connect to Your ATGs

NETWORK

Remote Fuel Monitoring

CONTACT

Technical Support

Once installation has completed, we’re just getting started. We connect you to vital operational and performance information from your sites, enabling data-driven decision making and conditions-based

maintenance.

* Products

PRODUCT CATEGORIES

* Submersible Pumping * Integrated Electrical Controls * Fuel Management Systems * Piping & Containment

* Wire Management

* Service Station Hardware

* Dispensing

* Transport

* System Solutions

* Corrosion Control * Vapor Suppression

* This is Franklin

* Our Commitment

* Finding The Solution

* News

* Subscription Center * Let's Be Frank Podcast

* Events

* Our Facilities

* Job Opportunities

* Corporate Website

* Support

* Support Center

* Distributor Hub

* Contact Us

* Tech Docs Portal

* Video Portal

* Drawing Portal

* Order Literature

* Order Gear

* Find a Salesperson * Find a Distributor * Find a Certified Installer

*

Search

INTRODUCING

FLOW RATE MONITORING

LEARN MORE

INTRODUCING

FLOW RATE MONITORING

LEARN MORE

OUR LATEST INNOVATIONS Check out these new products from Franklin Fueling Systems.

POWER INTEGRITY™

Integrated electrical controls.

LEARN MORE

CORROSION CONTROL™ SYSTEM Attack corrosion before it develops.

LEARN MORE

EVO™ 600 & EVO™ 6000 The evolution of fuel management continues.

LEARN MORE

------------------------- THE TOTAL SYSTEM SOLUTION™ PROVIDER At Franklin Fueling Systems, everything we do focuses on providing petroleum marketers, distributors, installers, and maintenance personnel with the optimal Total System Solution™. We set the standard for quality and innovation, with industry-leading availability, and consolidated shipments all from one manufacturer. YOUR PARTNER, EVERY STEP OF THE WAY Our service extends far beyond the product itself, helping your business plan, build, and maintain fuel systems that are designed to work together while providing the lowest total cost of ownership.

PLAN

LEARN from industry experts, DESIGN the best site, or OPTIMIZE your design.

BUILD

TRACK your orders to your site, INSTALL to the highest standards, or VERIFY the site installation.

MAINTAIN

CONNECT to ATGs,

NETWORK with sites, or

CONTACT support.

-------------------------

PRODUCT SEARCH

Search

LATEST NEWS

------------------------- NEW: LOW PROFILE DISPENSER SUMP 06/02/2021 - Low Profile, Single Wall Fiberglass Dispenser... NEW: P/V VENT WITH FLAME ARRESTOR OPTION 05/14/2021 - Defender Series® Pressure/Vacuum (P/V) Vents no... INTRODUCING: INTEGRATED ELECTRICAL CONTROLS 05/11/2021 - The new Integrated Electrical Controls product...

* Plan

* Build

* Maintain

* Products

* This is Franklin

* Support

* Our Story

* Contact Us

* Corporate

* Job Opportunities

* Policies

* Legal Notices

Franklin Fueling Systems 3760 Marsh Road Madison, Wisconsin 53718 USA Phone: +1 (608) 838-8786 �2021 Franklin Fueling Systems

Details

Image Url

HTML Url

Moderation By

More Annotations

Elaine Sutton

2020-05-13 08:18:45

Elaine Sutton

2020-05-13 08:19:17

Elaine Sutton

2020-05-13 08:20:33

Elaine Sutton

2020-05-13 08:20:52

Elaine Sutton

2020-05-13 08:21:11

Elaine Sutton

2020-05-13 08:22:10

Elaine Sutton

2020-05-13 08:22:50

Elaine Sutton

2020-05-13 08:24:10

Elaine Sutton

2020-05-13 08:24:42

Elaine Sutton

2020-05-13 08:25:12

Elaine Sutton

2020-05-13 08:25:42

Elaine Sutton

2020-05-13 08:25:48

Favourite Annotations

Elaine Sutton

2020-02-23 12:43:09

Elaine Sutton

2020-02-23 12:43:41

Elaine Sutton

2020-02-23 12:43:42

Elaine Sutton

2020-02-23 12:43:57

Elaine Sutton

2020-02-23 12:43:57

Elaine Sutton

2020-02-23 12:44:11

Elaine Sutton

2020-02-23 12:44:18

Elaine Sutton

2020-02-23 12:44:34

Elaine Sutton

2020-02-23 12:44:49

Elaine Sutton

2020-02-23 12:45:02

Elaine Sutton

2020-02-23 12:45:14

Elaine Sutton

2020-02-23 12:45:27

Text

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

900 SERIES EVR

back into

LINE LEAK DETECTOR

test.

module.

1 ½ HP PUMPS

and

VARIABLE SPEED

relieves at

sizes.

GRADE LEVEL

LINE LEAK DETECTOR

test.

900 SERIES EVR

back into

ATG SELECTION

�”, 1

bar). Highlights.

402 SERIES UTILITY

blends up to E15.

Fueling Systems

activated.