NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of NVIDIA RTX 3090 ETH MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining.

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100. RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are

PROGPOW AMD

The latest WildRig Multi 0.23.0 Beta AMD GPU miner has added support for the the KAWPOW algorithm now used by RavenCoin (RVN) as well as ProgPoW used by Super Zero (SERO).The latest release also adds --benchmark option for ProgPoW algorithms (including KAWPOW) as well as added --benchmark-epoch option for estimated hashrate benchmark results for specific upcoming

RAPTOREUM MINER

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks. QTMINER - CRYPTO MINING BLOG The introduction of stratum support requires users to use a special fork of ethminer that is called qtminer ( source) that has been developed by Ethpool and is ONLY supported by their mining pool for the moment. A while ago another pool – Dwarfpool, has introduced a Stratum proxy as we’ve mentioned earlier on the blog, but their

proxy

NVIDIA CHANGE POWER STATE What you need to do is to run the following command: nvidia-smi -i 0 --loop-ms=1000 --format=csv,noheader --query-gpu=power.draw. In order to stop the reporting of the temperature in degrees Celisus you need to press CTRL + C. If you need to have the result recorded to a text file you can run the following command: INTEL HD GRAPHICS MINER Older Intel Integrated Graphics may support OpenCL on the CPU only, so they are no good for mining crypto coins unfortunately. Below you can find a list of the supported integrated Intel graphics processors that can be used for OpenCL mining: 4th Generation Intel Core Processors with: – Intel HD Graphics 4200/4400/4600/5000. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of NVIDIA RTX 3090 ETH MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining.

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100. RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are

PROGPOW AMD

The latest WildRig Multi 0.23.0 Beta AMD GPU miner has added support for the the KAWPOW algorithm now used by RavenCoin (RVN) as well as ProgPoW used by Super Zero (SERO).The latest release also adds --benchmark option for ProgPoW algorithms (including KAWPOW) as well as added --benchmark-epoch option for estimated hashrate benchmark results for specific upcoming

RAPTOREUM MINER

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks. QTMINER - CRYPTO MINING BLOG The introduction of stratum support requires users to use a special fork of ethminer that is called qtminer ( source) that has been developed by Ethpool and is ONLY supported by their mining pool for the moment. A while ago another pool – Dwarfpool, has introduced a Stratum proxy as we’ve mentioned earlier on the blog, but their

proxy

NVIDIA CHANGE POWER STATE What you need to do is to run the following command: nvidia-smi -i 0 --loop-ms=1000 --format=csv,noheader --query-gpu=power.draw. In order to stop the reporting of the temperature in degrees Celisus you need to press CTRL + C. If you need to have the result recorded to a text file you can run the following command: INTEL HD GRAPHICS MINER Older Intel Integrated Graphics may support OpenCL on the CPU only, so they are no good for mining crypto coins unfortunately. Below you can find a list of the supported integrated Intel graphics processors that can be used for OpenCL mining: 4th Generation Intel Core Processors with: – Intel HD Graphics 4200/4400/4600/5000. OPTIMIZED ETHEREUM MINING SETTINGS FOR NVIDIA RTX 3060 TI Optimized Ethereum Mining Settings for Nvidia RTX 3060 Ti, RTX 3070, RTX 3080 and RTX 3090 GPUs 24 Feb 2021 PHOENIXMINER 4GB MINING 21, Jan 2021. AMD’s Radeon RX 470/480 and RX 570/58 with 4GB of video memory can still be used to mine Ethereum (ETH), even though the DAG size is already a bit over 4GB which is more than the video memory available on these GPUs. The current Ethereum DAG epoch number is #389 and the size of the DAG file is 4.04 GB and it will continue to HELLMINER - CRYPTO MINING BLOG The Nheqminer miner fork (about 10-20% slower compared to hellminer) for VRSC is a bit slower in terms of performance, but is open source and available for Linux, Windows and MacOS and can work with all of the available mining pools. As already mentioned there are miners for GPUs as well, but they do not offer performance advantage over CPU AMD RYZEN THREADRIPPER 3990X HASHRATE 25, Feb 2020. AMD’s Ryzen Threadripper 3990X Processor is the latest and highest-end workstation CPU from AMD offering staggering 64 cores and 128 logical threads to the user or with other words really massive performance if you can manage to take advantage. The Ryzen Threadripper 3990X CPU does not come cheap at a retail price of about

$3990

CRYPTO MINING BLOG (509) MinerEU is now offering to its customers from Europe some of the Rockminer SHA-256 ASIC miners available at attractive prices and shipped from UK, so no extra taxes need to be paid. CRYPTO MINING BLOG (640) Crypto Mining Blog. It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies CRYPTO MINING BLOG (577) Some of the new Scrypt ASIC manufacturers that are starting to ship or may soon start to ship are apparently suffering from the same problems that some of the Bitcoin ASIC companies had when they started launching their products. CRYPTO MINING BLOG (227) It seems that there is a new option available for miners that want to run more GPUs on a single mining rig. We got a tip that there is a new riser card available on AliExpress claiming to be capable of splitting a single x16 PCI-E slot to 8x USB 3.0 type of connectors for use with the respective x1 PCI-E CRYPTO MINING BLOG (369) The last few days the exchange rate of Bitcoin (BTC) has been steadily going up and today it has surpassed the $270 USD mark and that may not be the highest point it may reach this time. CRYPTO MINING BLOG (589) As a long time and happy users of the LTC Rabbit mining pool we are happy to see that they have added support for X11 mining. The idea behind X11 mining support is pretty much the same as the pool’s idea for Litecoin mining – you mine X11-based crypt currencies such as DarkCoin and they get automatically exchanged for LTC and you are being payed in Litecoins. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3070 ETHEREUM MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100. HELLMINER - CRYPTO MINING BLOG The Nheqminer miner fork (about 10-20% slower compared to hellminer) for VRSC is a bit slower in terms of performance, but is open source and available for Linux, Windows and MacOS and can work with all of the available mining pools. As already mentioned there are miners for GPUs as well, but they do not offer performance advantage over CPU RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are

RAPTOREUM MINER

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks. QTMINER - CRYPTO MINING BLOG The introduction of stratum support requires users to use a special fork of ethminer that is called qtminer ( source) that has been developed by Ethpool and is ONLY supported by their mining pool for the moment. A while ago another pool – Dwarfpool, has introduced a Stratum proxy as we’ve mentioned earlier on the blog, but their

proxy

PROGPOW AMD

The latest WildRig Multi 0.23.0 Beta AMD GPU miner has added support for the the KAWPOW algorithm now used by RavenCoin (RVN) as well as ProgPoW used by Super Zero (SERO).The latest release also adds --benchmark option for ProgPoW algorithms (including KAWPOW) as well as added --benchmark-epoch option for estimated hashrate benchmark results for specific upcoming INTEL HD GRAPHICS MINER Older Intel Integrated Graphics may support OpenCL on the CPU only, so they are no good for mining crypto coins unfortunately. Below you can find a list of the supported integrated Intel graphics processors that can be used for OpenCL mining: 4th Generation Intel Core Processors with: – Intel HD Graphics 4200/4400/4600/5000. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3070 ETHEREUM MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100. HELLMINER - CRYPTO MINING BLOG The Nheqminer miner fork (about 10-20% slower compared to hellminer) for VRSC is a bit slower in terms of performance, but is open source and available for Linux, Windows and MacOS and can work with all of the available mining pools. As already mentioned there are miners for GPUs as well, but they do not offer performance advantage over CPU RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are

RAPTOREUM MINER

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks. QTMINER - CRYPTO MINING BLOG The introduction of stratum support requires users to use a special fork of ethminer that is called qtminer ( source) that has been developed by Ethpool and is ONLY supported by their mining pool for the moment. A while ago another pool – Dwarfpool, has introduced a Stratum proxy as we’ve mentioned earlier on the blog, but their

proxy

PROGPOW AMD

The latest WildRig Multi 0.23.0 Beta AMD GPU miner has added support for the the KAWPOW algorithm now used by RavenCoin (RVN) as well as ProgPoW used by Super Zero (SERO).The latest release also adds --benchmark option for ProgPoW algorithms (including KAWPOW) as well as added --benchmark-epoch option for estimated hashrate benchmark results for specific upcoming INTEL HD GRAPHICS MINER Older Intel Integrated Graphics may support OpenCL on the CPU only, so they are no good for mining crypto coins unfortunately. Below you can find a list of the supported integrated Intel graphics processors that can be used for OpenCL mining: 4th Generation Intel Core Processors with: – Intel HD Graphics 4200/4400/4600/5000. OPTIMIZED ETHEREUM MINING SETTINGS FOR NVIDIA RTX 3060 TI Optimized Ethereum Mining Settings for Nvidia RTX 3060 Ti, RTX 3070, RTX 3080 and RTX 3090 GPUs 24 Feb 2021 PHOENIXMINER 4GB MINING 21, Jan 2021. AMD’s Radeon RX 470/480 and RX 570/58 with 4GB of video memory can still be used to mine Ethereum (ETH), even though the DAG size is already a bit over 4GB which is more than the video memory available on these GPUs. The current Ethereum DAG epoch number is #389 and the size of the DAG file is 4.04 GB and it will continue to HELLMINER - CRYPTO MINING BLOG The Nheqminer miner fork (about 10-20% slower compared to hellminer) for VRSC is a bit slower in terms of performance, but is open source and available for Linux, Windows and MacOS and can work with all of the available mining pools. As already mentioned there are miners for GPUs as well, but they do not offer performance advantage over CPU AMD RYZEN THREADRIPPER 3990X HASHRATE 25, Feb 2020. AMD’s Ryzen Threadripper 3990X Processor is the latest and highest-end workstation CPU from AMD offering staggering 64 cores and 128 logical threads to the user or with other words really massive performance if you can manage to take advantage. The Ryzen Threadripper 3990X CPU does not come cheap at a retail price of about

$3990

CRYPTO MINING BLOG (318) Influxcoin (INFX) is apparently today’s big hit in the world of altcoins as the interest and the exchange rate of the coin has exploded. The reason for the peak is the official announcement that the Microsoft has added the project in their continuing expansion of Azure’s Blockchain as a Service.Other coins that have been added today include Expanse (EXP), a project that was forked from CRYPTO MINING BLOG (131) Funakoshi’s Equihash 144,5 CUDA miner is arguably the fastest Equihash 144,5 Nvidia GPU miner available at the moment for both Linux and Windows users with the software constantly being developed and improved as you can see from the short timespan between the new

version updates.

CRYPTO MINING BLOG (95) The latest Bminer 15.4.0 comes with improved performance for Cuckaroo29 and Aeternity algorithms as well as improved compatibility

on Windows.

CRYPTO MINING BLOG (668) Crypto Mining Blog. It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies CRYPTO MINING BLOG (422) The Quark and Qubit crypto algorithms continue to be quite profitable, but until recently these algorithms were mostly in the Nvidia domain as the ccMiner for Nvidia GPUs was faster than the available performance on AMD hardware. CRYPTO MINING BLOG (467) We have not compiled a windows binary from the latest sgminer for a while and meantime it has been updated to version 5.1.0 including some small fixes.We have compiled a windows binary form the latest source code available in the master branch and you can download it from the

link below.

CRYPTO MINING BLOG

Just like the more recently released Nvidia GeForce RTX 3060 that came with mining hashrate limiter enforced by Nvidia, the new GeForce RTX 3080 Ti also came out “with a reduced Ethereum hash rate” making them less desirable for miners. The just released Nvidia GeForce RTX 3080 Ti is almost equivalent in terms of specifications to an RTX 3090 GPU, but with half the video memory,

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of NVIDIA RTX 3070 ETHEREUM MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of OPTIMIZED ETHEREUM MINING SETTINGS FOR NVIDIA RTX 3060 TI Optimized Ethereum Mining Settings for Nvidia RTX 3060 Ti, RTX 3070, RTX 3080 and RTX 3090 GPUs 24 Feb 2021 NVIDIA RTX 3080 ETH MINING SETTINGS Do note that the settings below are intended for Ethereum mining and/or other memory intensive crypto algorithms such as VertHash for example, the settings are most likely not optimal for mining use where a GPU-intensive algorithm is in play! Nvidia RTX 3060 Ti Optimized Mining Settings: – TDP: 60% / PHOENIXMINER 4GB MINING 21, Jan 2021. AMD’s Radeon RX 470/480 and RX 570/58 with 4GB of video memory can still be used to mine Ethereum (ETH), even though the DAG size is already a bit over 4GB which is more than the video memory available on these GPUs. The current Ethereum DAG epoch number is #389 and the size of the DAG file is 4.04 GB and it will continue to NVIDIA RTX 3080 LAPTOP GPU MINING GeForce RTX 3080 Laptop GPU: – Stock ETH hashrate: 49 MH/s. – Optimized ETH hashrate: 56 MH/s. The above hashrates are for GPUs in gaming notebooks with VRAM at 1500 MHz default for the RTX 3060 Laptop GPU and RTX 3070 Laptop GPU and 1750 MHz for the RTX 3080 Laptop GPU. The optimized hashrates are for overclocked video memory with +650 MHz GEFORCE RTX 3060 LIMITED HASHRATE Nvidia has decided to enforce hashrate limitation for the RTX 3060 via their video drivers in order to drive away miners and have the GPU available to gamers. So, instead of 40–45 MH/s hashrate for Ethereum mining users will be getting just around half of that at 20–22 MH/s and that is definitely not as attractive for such a high-priced

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100.

CRYPTO MINING BLOG

Just like the more recently released Nvidia GeForce RTX 3060 that came with mining hashrate limiter enforced by Nvidia, the new GeForce RTX 3080 Ti also came out “with a reduced Ethereum hash rate” making them less desirable for miners. The just released Nvidia GeForce RTX 3080 Ti is almost equivalent in terms of specifications to an RTX 3090 GPU, but with half the video memory,

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of NVIDIA RTX 3070 ETHEREUM MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of OPTIMIZED ETHEREUM MINING SETTINGS FOR NVIDIA RTX 3060 TI Optimized Ethereum Mining Settings for Nvidia RTX 3060 Ti, RTX 3070, RTX 3080 and RTX 3090 GPUs 24 Feb 2021 NVIDIA RTX 3080 ETH MINING SETTINGS Do note that the settings below are intended for Ethereum mining and/or other memory intensive crypto algorithms such as VertHash for example, the settings are most likely not optimal for mining use where a GPU-intensive algorithm is in play! Nvidia RTX 3060 Ti Optimized Mining Settings: – TDP: 60% / PHOENIXMINER 4GB MINING 21, Jan 2021. AMD’s Radeon RX 470/480 and RX 570/58 with 4GB of video memory can still be used to mine Ethereum (ETH), even though the DAG size is already a bit over 4GB which is more than the video memory available on these GPUs. The current Ethereum DAG epoch number is #389 and the size of the DAG file is 4.04 GB and it will continue to NVIDIA RTX 3080 LAPTOP GPU MINING GeForce RTX 3080 Laptop GPU: – Stock ETH hashrate: 49 MH/s. – Optimized ETH hashrate: 56 MH/s. The above hashrates are for GPUs in gaming notebooks with VRAM at 1500 MHz default for the RTX 3060 Laptop GPU and RTX 3070 Laptop GPU and 1750 MHz for the RTX 3080 Laptop GPU. The optimized hashrates are for overclocked video memory with +650 MHz GEFORCE RTX 3060 LIMITED HASHRATE Nvidia has decided to enforce hashrate limitation for the RTX 3060 via their video drivers in order to drive away miners and have the GPU available to gamers. So, instead of 40–45 MH/s hashrate for Ethereum mining users will be getting just around half of that at 20–22 MH/s and that is definitely not as attractive for such a high-priced

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100. NVIDIA RTX 3080 MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of

RTX 3080 TI

Just like the more recently released Nvidia GeForce RTX 3060 that came with mining hashrate limiter enforced by Nvidia, the new GeForce RTX 3080 Ti also came out “with a reduced Ethereum hash rate” making them less desirable for miners. The just released Nvidia GeForce RTX 3080 Ti is almost equivalent in terms of specifications to an RTX 3090 GPU, but with half the video memory, GAMING LAPTOP MINING HASHRATE With all that said, if you are going for a gaming laptop and plan on using it for crypto mining Ethereum (ETH) your best bet will be the mid-range GeForce RTX 3070 Laptop GPU both in terms of price and in terms of performance! NVIDIA GeForce RTX 3070 Desktop GPU: – CUDA Cores: 5888. – Default GPU Clock: 1500 MHz. – Boost GPU Clock:

1725 MHz.

NVIDIA GEFORCE RTX 3080 TI Recent Posts. Nvidia GeForce RTX 3080 Ti Comes With Reduced Mining Hashrate Too; Bitmain Teasing With the Upcoming AntMiner E9 Ethereum

Miner; Raptoreum

CRYPTO MINING BLOG (131) Funakoshi’s Equihash 144,5 CUDA miner is arguably the fastest Equihash 144,5 Nvidia GPU miner available at the moment for both Linux and Windows users with the software constantly being developed and improved as you can see from the short timespan between the new

version updates.

CRYPTO MINING BLOG (232) If you were surprised by yesterday’s announcement from Bitmain with their 15 GHS X11 ASIC miner, then the new X11 ASIC from Innosilicon will surprise you even more.The Innosilicon A5 DashMaster is claimed to be capable of delivering up to 30.2 GHS X11 hashrate with just 750W of power usage, that is double the performance with lower power usage compared to Antminer D3. CRYPTO MINING BLOG (270) AMD GPU miners were recently getting quite the boost thanks to Claymore’s Zcash miner on Windows, but now Windows users with Nvidia GPUs also got a nice boost in ZEC mining performance thanks to the release of the NiceHash EQM Zcash Nvidia Optimized Miner. CRYPTO MINING BLOG (227) It seems that there is a new option available for miners that want to run more GPUs on a single mining rig. We got a tip that there is a new riser card available on AliExpress claiming to be capable of splitting a single x16 PCI-E slot to 8x USB 3.0 type of connectors for use with the respective x1 PCI-E CRYPTO MINING BLOG (580) One of the first people to get their ZeusMiner Blizzard Scrypt ASICs has posted some photos and videos of the unboxing of his new miner on his blog, he shows the disassembly of the miner and the Zeus ASIC chips inside and then then the miner happily hashing at multipool as

well.

CRYPTO MINING BLOG (447) Crypto Mining Blog. It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies

CRYPTO MINING BLOG

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks.

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3090 ETH MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are GEFORCE RTX 3060 LIMITED HASHRATE Nvidia has decided to enforce hashrate limitation for the RTX 3060 via their video drivers in order to drive away miners and have the GPU available to gamers. So, instead of 40–45 MH/s hashrate for Ethereum mining users will be getting just around half of that at 20–22 MH/s and that is definitely not as attractive for such a high-priced

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100.

ETHEREUM CPU MINER

The ethminer software uses the ethpool mining pool for mining, the pool fee is 2% and there is a flat fee of 0.01 Ether per payout charged with minimum payout of 1 Ether, also the pool is beta and there could be some issues. The geth software contains only CPU miner while ethminer supports CPU (up to about 2 times faster than geth CPU

mining

GRIDSEED USB ASIC

15, Mar 2014. Today we have decided to compare the Gridseed 5-chip BTC/LTC Dual Mode ASIC devices in terms of thermal characteristics when operating in Scrypt only mining mode (~8W overclocked) and in Scrypt/SHA-256 dual mining mode (~65W overclocked). We wanted to see how good the massive radiator and high-speed cooling fan will be able

to

GRIDSEED GC3355

10, Jun 2014. It seems that Gridseed might be working on a new even larger Scrypt ASIC miner, or that is what got as information from a reader that sent a link to publication on a new mining forum called MinerTalk. From the apparently leaked photos of the new miner published there we can see that it is a larger box miner with

integrated PSU and

DOWNLOAD CGMINER 3.8.5 FOR WINDOWS BTC MINING ON GRIDSEED Download cgminer 3.8.5 for Windows BTC mining on Gridseed 5-chip GC3355 ASICs. 6 Mar. 2014. In our efforts to make the Gridseed 5-chip GC3355-based ASIC miner devices to work in Dual Mode for mining Bitcoin (BTC) and Litecoin (LTC) at the same time under Windows we have compiled the special modified version of cgminer 3.8.5 that is

designed to

CRYPTO MINING BLOG

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks.

RAVENCOIN RTX 3090

21, Feb 2021. Last year Ravencoin (RVN) has successfully hardforked and switched to KAWPOW as a mining algorithm from the previously used X16Rv2 algo. The latest Z-Enemy 2.6.3 Beta version that was recently made available is an important update for everyone that has Nvidia GeForce RTX 30 Series of GPUs and uses them for crypto mining. NVIDIA RTX 3090 ETH MINING SETTINGS Nvidia RTX 3090 Optimized Mining Settings: – TDP: 73% / 300W. – GPU: -400 MHz. – VRAM: +1000 MHz. – FANS: 100%. – ETH Hashrate: 120 MH/s. – More on MSI GeForce RTX 3090 SUPRIM X 24G GPUs. * The clocks cited above are for use with a tool such as MSI Afterburner, overclocking the video memory in other tools might require the use of RAVENCOIN ASIC MINING Ravencoin (RVN) Getting FPGA Mining Support for the X16Rv2 Algorithm. Back in October Ravencoin (RVN) forked to X16Rv2 as a means to drive away the ASIC miners for the X16R algorithm it previously used. The new algorithm X16Rv2 has helped lower the hashrate and make RVN mining prfotable for mining with GPUs for a bit, but now it seems we are GEFORCE RTX 3060 LIMITED HASHRATE Nvidia has decided to enforce hashrate limitation for the RTX 3060 via their video drivers in order to drive away miners and have the GPU available to gamers. So, instead of 40–45 MH/s hashrate for Ethereum mining users will be getting just around half of that at 20–22 MH/s and that is definitely not as attractive for such a high-priced

CLCREATEBUFFER 61

Linux users might try this as well, however you need to replace the setx with export and add = before the value you want to set, so the above list of commands needed for Linux users mining Ethereum should look like this: export GPU_FORCE_64BIT_PTR=0. export GPU_MAX_HEAP_SIZE=100. export GPU_USE_SYNC_OBJECTS=1. export GPU_MAX_ALLOC_PERCENT=100.

ETHEREUM CPU MINER

The ethminer software uses the ethpool mining pool for mining, the pool fee is 2% and there is a flat fee of 0.01 Ether per payout charged with minimum payout of 1 Ether, also the pool is beta and there could be some issues. The geth software contains only CPU miner while ethminer supports CPU (up to about 2 times faster than geth CPU

mining

GRIDSEED USB ASIC

15, Mar 2014. Today we have decided to compare the Gridseed 5-chip BTC/LTC Dual Mode ASIC devices in terms of thermal characteristics when operating in Scrypt only mining mode (~8W overclocked) and in Scrypt/SHA-256 dual mining mode (~65W overclocked). We wanted to see how good the massive radiator and high-speed cooling fan will be able

to

GRIDSEED GC3355

10, Jun 2014. It seems that Gridseed might be working on a new even larger Scrypt ASIC miner, or that is what got as information from a reader that sent a link to publication on a new mining forum called MinerTalk. From the apparently leaked photos of the new miner published there we can see that it is a larger box miner with

integrated PSU and

DOWNLOAD CGMINER 3.8.5 FOR WINDOWS BTC MINING ON GRIDSEED Download cgminer 3.8.5 for Windows BTC mining on Gridseed 5-chip GC3355 ASICs. 6 Mar. 2014. In our efforts to make the Gridseed 5-chip GC3355-based ASIC miner devices to work in Dual Mode for mining Bitcoin (BTC) and Litecoin (LTC) at the same time under Windows we have compiled the special modified version of cgminer 3.8.5 that is

designed to

EQUILIBRIA MINING

Recent Posts. Bitmain Teasing With the Upcoming AntMiner E9 Ethereum Miner; Raptoreum (RTM) Crypto Progect and Its GhostRider CPU Algorithm; Nvidia GeForce RTX 3060 With Full Unrestricted ETH Mining Hashrate, But Only With Single GPU in a Gaming PC

ETC ZIL MINING

The current price of a single Zilliqa (ZIL) coin is a little over $0.09 USD or roughly 0.000001968 BTC or 0.00005237 ETH according to CoinMarketCap. Currently Zilliqa sits at number 56 in term of coin market capitalization and can soon take its place in the TOP 50 crypto coins based on their market cap.

RTX 3080 TI

Just like the more recently released Nvidia GeForce RTX 3060 that came with mining hashrate limiter enforced by Nvidia, the new GeForce RTX 3080 Ti also came out “with a reduced Ethereum hash rate” making them less desirable for miners. The just released Nvidia GeForce RTX 3080 Ti is almost equivalent in terms of specifications to an RTX 3090 GPU, but with half the video memory, NVIDIA GEFORCE RTX 3080 Just like the more recently released Nvidia GeForce RTX 3060 that came with mining hashrate limiter enforced by Nvidia, the new GeForce RTX 3080 Ti also came out “with a reduced Ethereum hash rate” making them less desirable for miners. The just released Nvidia GeForce RTX 3080 Ti is almost equivalent in terms of specifications to an RTX 3090 GPU, but with half the video memory, CRYPTO MINING BLOG (365) New update in the form of a Windows binary release compiled from the latest Git source code of the ccMiner 1.5.72-git SP-MOD fork by SP

optimized for

NVIDIA GEFORCE RTX 3080 TI Recent Posts. Nvidia GeForce RTX 3080 Ti Comes With Reduced Mining Hashrate Too; Bitmain Teasing With the Upcoming AntMiner E9 Ethereum

Miner; Raptoreum

CRYPTO MINING BLOG (218) Crypto Mining Blog. It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies CRYPTO MINING BLOG (215) It seems that there is a new wave of HDMI dummy plugs coming from China at very cheap prices (At least if you order directly from there) that are based on the Headless Ghost display emulator.These HDMI display emulator devices just plug inside the main video card of your mining rig and simulate the presence of a display with up to 4K

resolution.

CRYPTO MINING BLOG (308) Valve has officially added support for Bitcoin payments in their Steam platform for distributing games online, meaning that millions of

gamers

CRYPTO MINING BLOG (224) There is a new closed source Ethereum (ETH) miner that also works with other Ethash-based crypto coins available and it is called Eminer. The miner is available for both AMD and Nvidia GPUs and what makes it really interesting is the integrated local web dashboard that gives you detailed stats for the mining rig the miner is running on.

CRYPTO MINING BLOG

It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies

SEARCH

Saturday June 5, 2021

* Home

* Contact us

* Full Posts   |  Comments

Search for:

CATEGORIES

* Cloud Mining

* Crypto Coins

* Crypto ICOs

* Crypto News

* General Info

* Mining Hardware

* Mining Software

* Tests and Reviews

RECENT POSTS

* Bitmain Teasing With the Upcoming AntMiner E9 Ethereum Miner * Raptoreum (RTM) Crypto Progect and Its GhostRider CPU Algorithm * Nvidia GeForce RTX 3060 With Full Unrestricted ETH Mining Hashrate, But Only With Single GPU in a Gaming PC * AMD Radeon RX 6700 XT Ethereum Mining Hashrate And More * Pre-orders Are Apparently Open for Nvidia CMP 30HX Mining GPUs * TechPowerUp GPU-Z 2.37.0 With Nvidia GDDR6X Memory Temperature

Monitoring

LINKS

* 3D Printing Blog

* 3D Vision Blog

* All The Things That Really Matter in Life

* Battery Tests

* Bitcoin Cloud Mining * Bitcoin Mining Game * Buy Games with Bitcoin * Crypto Blog on Medium * Crypto Trading Bot * Crypto Trading Charts * Earn Your First Bitcoin

* Game Deals Blog

* HiveOS Mining OS

* Mining Rig Rentals

* Play Crypto Games

* RC Cars and Parts

* Thermal Imaging Blog * Try the CryptoBrowser

CRYPTO TAGS

ccminer lyra2v2

C31 Bitmain Bytom ASIC

DualMiner USB

ASIC Claymore

dual miner Linux

alt

crypto mining

Bitcoin free game

blc gpu miner

sph-sgminer

GeForce RTX 3060

Ethash

BTC halving

Blackminer F1 Mini FPGA

Markets

cx LTC cloud mining

Cuckatoo31 ASIC

FutureBit MoonLander miner

6-card

mining rig

Steam pay with Bitcoin

Hard Fork

gaming laptop mining

hashrate

Wirex Visa card

consensus issue

RandomX Ryzen mining

RTX 3080

Nvidia temperature

Primio info

G2A deals

Pluck coin

DMD exchange

Bitbar

Lyra2REv2 ASIC

multipool strategy

CPU crypto

mining mnr gpu

mining GhostRider

algorithm

Etherepool source code

mycoinads

Ethereum Mining Backed

Security Fund

eth client gui

C.H81A-BTC V20

Peter af Geijerstam

Pxlcoin

exchanges

Infinitecoin pools

Hawaii ETH

mining cgminer

3.7.8 neoscrypt

PotCoin

pool BSHA3 FPGA

TT-Miner 3.1.0 Beta 3

BQC

exchange LXRHash

coin GeForce GTX 780

Ti Ravencoin

ccminer fork

Fury X

Lyra2Re HIRE

MaryJaneCoin crypto

Cuckarood29

miner Goldcoin

exhanges

Bitmesh ASIC Miner

Hardware

MicroBitcoin exchange

XenCoin

pools

BITMAIN TEASING WITH THE UPCOMING ANTMINER E9 ETHEREUM MINER

25 Apr

2021

Bitmain is teasing with the apparently soon to be launched new Ethash miner called Antminer E9 that is supposed to be offering 3 GH/s mining hashrate with 2556 Watts of power usage and 0.85 J/M power efficiency. This is what they claim to be the equivalent of 32 RTX 3080 graphics cards and it roughly is in terms of performance. So, the Antminer E9 is going to be offering similar performance to 32x Nvidia GeForce RTX 3080 GPU mining rig mining Ethereum with GPUs optimized for close to 100 MH/s hashrate, but with power usage at just about 1/3 of what the GPUs will need. Hopefully with a price that is much less compared to how much these video cards will cost you currently, though there is still no exact launch date or pricing information released… Bitmain however is not the first to upgrade their already outdated dedicated Ethash miner, namely the Bitmain Antminer E3 that has been around for ages. There are other competitors on the dedicated ETH miners market, namely Innosilicon and Linzhi

.

Innosilicon’s new ETH miner – the Innosilicon A11 is supposedly going to deliver 2100 MH/s Ethash hashrate with just 2300W of power usage, while the newcomer Linzhi and their Linzhi Phoenix ETH miner is supposedly capable of 2600 MHS hashrate for Ethash with a power usage of 3000-3500W. So, Bitmain is going to be doing better in terms of performance and with lower hashrate if the specs of their AntMiner E9 ETH miner end up to be right on the spot. It is very likely however that the price will also be reflecting the better hashrate and lower power usage as well, so it could be more expensive than the slower

alternatives.

* Published in: Mining Hardware * Related tags: AntMiner E9 , AntMiner E9 Ethash

miner ,

AntMiner E9 Ethereum Miner

,

Bitmain , Bitmain AntMiner

E9 , Bitmain

AntMiner E9 Ethereum Miner

,

Bitmain ETH miner

, BitMain Ethash

miner ,

BitMain Ethereum miner

, ETH miner

, Ethash miner

, Ethereum miner

, Innosilicon A11

, Linzhi Phoenix

* Read More

* (1) Comment

RAPTOREUM (RTM) CRYPTO PROGECT AND ITS GHOSTRIDER CPU ALGORITHM

17 Apr

2021

The Raptoreum (RTM) crypto project has been in development for quite some time now and just recently has officially launched its mainnet. The goal of Raptoreum is to provides a fast and secure cryptocurrency that anybody can easily use, but even more than that it is building a simple to use asset platform that will allow anybody to tokenize anything (non fungible tokens) with just a few clicks. RTM features POW mining with a custom algorithm called Ghostrider, currently CPU-only as well as smartnodes. The Ghostrider algorithm is a combination of algorithms from the X16R and CryptoNight families, cycled in random and not so random patterns used to gain consensus on the on chain generation and transaction of coins. Although the Ghostride algorithm is currently CPU-only a transition to GPU mining is very likely in the not so distant future. If you have some spare CPU mining power and what to try something new, then you might check out the Raptoreum (RTM) project and its GhostRider algorithm. There are a number of mining pools supporting RTM mining with RPlant being the largest in terms of hashrate, followed by Suprnova and the dedicated RTM pool R-pool . For a CPU miner supporting the Ghostrider Take2 algorithm you can check cpuminer-ghostrider-take2-support

available for

both Windows and Linux binaries for the most popular CPU architectures as well as in source. RTМ is being traded already on SoouthXchange, SafeTrade and AutradeX. – MORE INFORMATION ABOUT THE RAPTOREUM (RTM) CRYPTO PROGECT AND ITS GHOSTRIDER CPU ALGORITHM… * Published in: Crypto Coins * Related tags: GhostRider , GhostRider algorithm

, GhostRider

miner ,

GhostRider mining

, Raptoreum

, Raptoreum exchange

, Raptoreum

miner , Raptoreum

mining ,

Raptoreum pool ,

RTM , RTM exchange

, RTM miner

, RTM mining

, RTM pool

* Read More

* (2) Comments

NVIDIA GEFORCE RTX 3060 WITH FULL UNRESTRICTED ETH MINING HASHRATE, BUT ONLY WITH SINGLE GPU IN A GAMING PC

15 Mar

2021

It seems that a workaround to the artificially enforced hashrate limiter for the Nvidia GeForce RTX 3060 GPUs mining Ethereum has been discovered and it is pretty simple apparently. You just need to use the developer driver version 470.05 where there is apparently no hashrate limiting being applied, unlike with the regular GeForce video driver that you would normally download for these video cards. This has been reported by some users and we can confirm that it is indeed working and you can get the full mining hashrate for Ethereum with this driver, however there is still a catch… read on below with the latest updates on what and how it works. We are getting 47 MH/s Ethash mining hashrate using the Nvidia developer driver version 470.05 with PhoenixMiner mining Ethereum, with the following settings in MSI Afterburner: 70% TDP, -500 MHz GPU, +1000 MHz video memory. You can check what performance does a Asus ROG Strix GeForce RTX 3060 OC Edition manage to provide you with with the limited hashrate regular drivers, though the limit is not for all crypto algorithms, but for memory-intensive ones such as Ethash and VertHash for instance. The drawback is that the Nvidia developer driver version 470.05 does require you to register on the Nvidia website as developer and is currently still available for Windows only, but hey, it works and you get the full mining hashrate mining Ethereum and other algorithms such as Verthash used by Vertcoin that apparently also suffered from the hashrate limitation introduced by Nvidia for the RTX 3060. For VTC mining with the above settings the hashrate we are getting is around 810 KH/s instead of the reduced in half sub-400 with the regular

driver.

UPDATE: It seems that this “workaround” is still somewhat limited to just when using a single RTX 3060 GPU connected to a monitor, with more GPUs in a mining rig it does not seem to work for full hashrate on all of the video cards… Further researching into the matter with a single RTX 3060 GPU working with unrestricted hashrate, while multiple ones not working has revealed that there seem to be some conditions met. Having a single RTX 3060 GPU connected on a ь8/x16 PCI-E slot (no extenders) and a monitor connected to it. This makes us believe that Nvidia did not in fact forget to implement the protection in the latest developer driver 370.05, but has instead further improved their protection mechanism instead. What they could’ve done is to detect that you are using a single video card in a gaming setup and then no limitations, even for mining will be enforced, while if more GPUs on a slower PCI-E interface are present then this is a mining rig and the hashrate will

be reduced.

– TO DOWNLOAD THE NVIDIA DEVELOPER DRIVER VERSION 470.05 (FREE REGISTRATION REQUIRED)… * Published in: Mining Hardware

|Tests and

Reviews

* Related tags: Asus ROG Strix GeForce RTX 3060 OC Edition

,

Dedicated GPUs for Professional Crypto Mining

,

GeForce RTX 3060

, GeForce RTX

3060 ETH ,

GeForce RTX 3060 ETH hashrate

,

GeForce RTX 3060 ETH mining

,

GeForce RTX 3060 ETH performance

,

GeForce RTX 3060 Ethash

, GeForce

RTX 3060 Ethash hashrate

,

GeForce RTX 3060 Ethereum

,

GeForce RTX 3060 Ethereum hashrate

,

GeForce RTX 3060 half hashrate

,

GeForce RTX 3060 limited hashrate

,

GeForce RTX 3060 reduced hashrate

,

Nvidia , Nvidia CMP

, Nvidia CMP HX

, Nvidia GeForce RTX

3060 ,

Nvidia mining GPU

, Nvidia RTX

3060 , RTX 3060

, RTX 3060 BeamHashIII

, RTX 3060

KAWPOW , RTX 3060

ProgPoW , RTX

3060 Verthash ,

RTX 3060 Zelhash

* Read More

* (21) Comments

Page 1 of 73712 3

4

5

6

7

8

...20

30

40

50

60

...»

Last »

top

Copyright ©2014-2021 - Crypto Mining Blog - It Is All About BTC, LTC, ETH, DOGE mining as well as other alternative crypto currencies. This is a blog for crypto currency miners and crypto coin users of Bitcoin (BTC), Litecoin (LTC), Ethereum (ETH), DogeCoin (DOGE) and many other altcoins out there. If you find something helpful or useful crypto information you can support us by donating Bitcoin (BTC) to the following address: 1AxbMZwtcmCByrHiaWwhse5r6ea1YgBwk1 ETH: 0x8d785ff337046444d8afbac169bcb7c0adfb3266 - LTC: LPYFPK7dL1uEtwrAteLmxs7w8Je446gAAJ - DOGE: DLxLREnMEkFGjfkD8Riw2T1RRy9Ds8VZ9s