BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes.

PORTAL SIGN UP

Our line of products stretches across the whole spectrum of lithography wavelengths and is the most comprehensive product lineup

in the industry.

OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes.

PORTAL SIGN UP

Our line of products stretches across the whole spectrum of lithography wavelengths and is the most comprehensive product lineup

in the industry.

OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. BREWER SCIENCE ACHIEVES ISO 45001:2018 Brewer Science Achieves ISO 45001:2018 Global technology leader meets the world’s most widely recognized occupational health and safety management standard Rolla, Mo.–June 2021– Brewer Science, a global leader in developing and manufacturing next-generation materials and processes for the microelectronics and optoelectronics industries, is pleased to announce the achievement of ISO 45001

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. By joining forces with top

materials

QUALITY, ENVIRONMENTAL AND SAFETY Brewer Science has established, and is committed to being a leader in, quality, environmental, and health & safety management systems with a focus on exceeding customer expectations; being conscientious stewards of the environment by advancing sustainability programs and preventing pollution; and providing a healthy, safe, and secure workplace. NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

BREWERBOND 220

brewerscie nce.com Where innovation takes flight!SM BrewerBOND® 220 Bonding Material Coating Parameters (8” substrate) Static dispense in center of wafer Spin Speed See spin speed curve provided PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving

APOGEE BAKE PLATE

Apogee™ Bake Plate With DataStream™ Technology The Brewer Science � Cee Apogee™ bake plate features a revolutionary intuitive interface, a space- Where innovation takes flight!SM saving design, and track-quality thermal accuracy and uniformity. www.brewerscience.com

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

BREWERBOND 220

brewerscie nce.com Where innovation takes flight!SM BrewerBOND® 220 Bonding Material Coating Parameters (8” substrate) Static dispense in center of wafer Spin Speed See spin speed curve provided BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

BREWERBOND 220

brewerscie nce.com Where innovation takes flight!SM BrewerBOND® 220 Bonding Material Coating Parameters (8” substrate) Static dispense in center of wafer Spin Speed See spin speed curve provided BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. BREWER SCIENCE ACHIEVES ISO 45001:2018 Brewer Science Achieves ISO 45001:2018 Global technology leader meets the world’s most widely recognized occupational health and safety management standard Rolla, Mo.–June 2021– Brewer Science, a global leader in developing and manufacturing next-generation materials and processes for the microelectronics and optoelectronics industries, is pleased to announce the achievement of ISO 45001

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. By joining forces with top

materials

QUALITY, ENVIRONMENTAL AND SAFETY Brewer Science has established, and is committed to being a leader in, quality, environmental, and health & safety management systems with a focus on exceeding customer expectations; being conscientious stewards of the environment by advancing sustainability programs and preventing pollution; and providing a healthy, safe, and secure workplace. NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

BREWERBOND 220

brewerscie nce.com Where innovation takes flight!SM BrewerBOND® 220 Bonding Material Coating Parameters (8” substrate) Static dispense in center of wafer Spin Speed See spin speed curve provided PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving

APOGEE BAKE PLATE

Apogee™ Bake Plate With DataStream™ Technology The Brewer Science � Cee Apogee™ bake plate features a revolutionary intuitive interface, a space- Where innovation takes flight!SM saving design, and track-quality thermal accuracy and uniformity. www.brewerscience.com

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

WORLDWIDE LOCATIONS

Brewer Science is a global technology leader with many locations worldwide. See all locations here and contact us for more information.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK PSB PROTECTIVE COATING ProTEK ® PSB coating is a spin-on replacement for silicon nitride or silicon oxide wet etch masks. Brewer Science ® ProTEK ® PSB coating is used in the creation of inverse pyramidal pits as discussed in SUN Microsystems' technical paper, "Active Demonstration of a Passively Self-Aligned, Multi-Chip Package using Proximity Communication in a BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving ANTI-REFLECTIVE COATING FOR MULTIPATTERNING LITHOGRAPHY Anti-reflective coating for multipatterning lithography Douglas J. Guerrero, Steve Gibbons, Joyce Lowes, Ramil Mercado Brewer Science, Inc., 2401 Brew er Drive, Rolla, MO 65401, USA

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. BREWER SCIENCE ACHIEVES ISO 45001:2018 Brewer Science Achieves ISO 45001:2018 Global technology leader meets the world’s most widely recognized occupational health and safety management standard Rolla, Mo.–June 2021– Brewer Science, a global leader in developing and manufacturing next-generation materials and processes for the microelectronics and optoelectronics industries, is pleased to announce the achievement of ISO 45001

PRESS RELEASES

Rolla, Mo.–May 2021– Brewer Science, a global technology leader, is pleased to announce it is now a Certified B CorporationTM. As a B Corp, Brewer Science is committed to. May 17, 2021 Press Release Read More. April 06, 2021 Press Release.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs. PROTEK PROTECTIVE COATINGS Wet etching is a lower-cost, higher-throughput alternative to dry-etch processing. The Brewer Science® ProTEK® series of etch protection coatings enables simple, effective wet-etching processes for silicon, compound semiconductors, and glass. All Brewer Science ® protective coatings allow micromachining to take place closer to packaging

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. By joining forces with top

materials

ELECTRONICS, APPLIANCE & TIRE COLLECTION 8 a.m. to Noon Anything with a cord or battery operated! FREE! Stoves – washers – dryers – water heaters – computer components – keyboards – VCRs/DVD players – cell phones – hairdryers – garden equipment (oil and gas tanks must be removed prior to

recycling) – or

PROTEK PSB PROTECTIVE COATING ProTEK ® PSB coating is a spin-on replacement for silicon nitride or silicon oxide wet etch masks. Brewer Science ® ProTEK ® PSB coating is used in the creation of inverse pyramidal pits as discussed in SUN Microsystems' technical paper, "Active Demonstration of a Passively Self-Aligned, Multi-Chip Package using Proximity Communication in a BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc.

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

SIX STEPS TO STRUCTURED PROBLEM SOLVING This is the most time-consuming, but one of the most vital steps in the process as we take each potential cause and work to rule it out. We must keep working until we have eliminated everything but the root cause. 4. Verify Root Cause. When we think that we have identified the true root cause, we need verify that it is the root cause by testing PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving ADVANCED RINSE PROCESS ALTERNATIVES FOR REDUCTION OF Advanced Rinse Process Alternatives for Reduction of Photolithography Development Cycle Defects Nickolas L. Brakensieka, Peng Zhangb, Danielle Kingb, Craig Ghellia aBrewer Science, Inc.,2401 Brewer Dr., Rolla, MO 65401; bAir Products and Chemicals, Inc., Allentown, PA 18195 ABSTRACT As linewidths continue to decrease in size, preventing smaller defects is becoming critical to maintaining yield. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

SIX STEPS TO STRUCTURED PROBLEM SOLVING This is the most time-consuming, but one of the most vital steps in the process as we take each potential cause and work to rule it out. We must keep working until we have eliminated everything but the root cause. 4. Verify Root Cause. When we think that we have identified the true root cause, we need verify that it is the root cause by testing PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving ADVANCED RINSE PROCESS ALTERNATIVES FOR REDUCTION OF Advanced Rinse Process Alternatives for Reduction of Photolithography Development Cycle Defects Nickolas L. Brakensieka, Peng Zhangb, Danielle Kingb, Craig Ghellia aBrewer Science, Inc.,2401 Brewer Dr., Rolla, MO 65401; bAir Products and Chemicals, Inc., Allentown, PA 18195 ABSTRACT As linewidths continue to decrease in size, preventing smaller defects is becoming critical to maintaining yield. WHAT WE DO | BREWER SCIENCE That’s where we come in. Control the light. Change the world. Brewer Science has been developing cutting-edge materials and processes for controlling light during photolithography for over three decades. Without advances such as ARC® anti-reflective coatings, electronics would not be as small, fast, or affordable as they are today. NEWS & PRESS RELEASES Rolla, Mo.–May 2021– Brewer Science, a global technology leader, is pleased to announce it is now a Certified B CorporationTM. As a B Corp, Brewer Science is committed to. May 17, 2021 Press Release Read More. April 06, 2021 Press Release.

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. CONTACT US | BREWER SCIENCE Contact Us. At Brewer Science, our customer relationships don’t end when you buy materials and equipment. Because we want to work hand in hand to get your processes perfect, we’ve empowered an extensive applications and support team to help with all your processing needs. 1.573.364.0300 info@brewerscience.com Locations. FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. By joining forces with top

materials

CAREERS IN SCIENCE AND TECHNOLOGY The internship program at Brewer Science is an invigorating experience for students to immerse themselves in an innovative company, encouraging them to explore their interests and passions while growing as an individual. Over 70% of eligible interns at Brewer Science accept full-time positions at NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

SEMICON TAIWAN

SEMICON Taiwan is not just a platform that connects Taiwan and global microelectronics ecosystems but also a bridge that facilitates smooth collaboration between the industry, the government, the academia, and research institutions. Witnessing enormous business collaboration, SEMICON Taiwan still stays true to its missions― Leading Technology Trends, Driving Technology Innovation, and MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

SIX STEPS TO STRUCTURED PROBLEM SOLVING This is the most time-consuming, but one of the most vital steps in the process as we take each potential cause and work to rule it out. We must keep working until we have eliminated everything but the root cause. 4. Verify Root Cause. When we think that we have identified the true root cause, we need verify that it is the root cause by testing PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving ADVANCED RINSE PROCESS ALTERNATIVES FOR REDUCTION OF Advanced Rinse Process Alternatives for Reduction of Photolithography Development Cycle Defects Nickolas L. Brakensieka, Peng Zhangb, Danielle Kingb, Craig Ghellia aBrewer Science, Inc.,2401 Brewer Dr., Rolla, MO 65401; bAir Products and Chemicals, Inc., Allentown, PA 18195 ABSTRACT As linewidths continue to decrease in size, preventing smaller defects is becoming critical to maintaining yield. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

MICROELECTRONIC LITHOGRAPHY PRODUCTS Permanent Bonding Materials. WaferBOND® HT-10.11 and HT-10.12 Materials. Selective Surface Modification. Advanced Lithography. Brewer Science lithography products have been shaping the semiconductor industry since 1981. Over the years, new product lines, capabilities, and specifications have been improved to deliver the best. Electronics Design. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

PORTAL SIGN UP

Portal Sign Up. First Name. Last Name. Company Name. Email*. Portal Type. - Please Select - Customer Supplier. Describe Your Portal Needs.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

SIX STEPS TO STRUCTURED PROBLEM SOLVING This is the most time-consuming, but one of the most vital steps in the process as we take each potential cause and work to rule it out. We must keep working until we have eliminated everything but the root cause. 4. Verify Root Cause. When we think that we have identified the true root cause, we need verify that it is the root cause by testing PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving ADVANCED RINSE PROCESS ALTERNATIVES FOR REDUCTION OF Advanced Rinse Process Alternatives for Reduction of Photolithography Development Cycle Defects Nickolas L. Brakensieka, Peng Zhangb, Danielle Kingb, Craig Ghellia aBrewer Science, Inc.,2401 Brewer Dr., Rolla, MO 65401; bAir Products and Chemicals, Inc., Allentown, PA 18195 ABSTRACT As linewidths continue to decrease in size, preventing smaller defects is becoming critical to maintaining yield. MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is WHAT WE DO | BREWER SCIENCE That’s where we come in. Control the light. Change the world. Brewer Science has been developing cutting-edge materials and processes for controlling light during photolithography for over three decades. Without advances such as ARC® anti-reflective coatings, electronics would not be as small, fast, or affordable as they are today. NEWS & PRESS RELEASES Rolla, Mo.–May 2021– Brewer Science, a global technology leader, is pleased to announce it is now a Certified B CorporationTM. As a B Corp, Brewer Science is committed to. May 17, 2021 Press Release Read More. April 06, 2021 Press Release.

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. CONTACT US | BREWER SCIENCE Contact Us. At Brewer Science, our customer relationships don’t end when you buy materials and equipment. Because we want to work hand in hand to get your processes perfect, we’ve empowered an extensive applications and support team to help with all your processing needs. 1.573.364.0300 info@brewerscience.com Locations. FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. By joining forces with top

materials

CAREERS IN SCIENCE AND TECHNOLOGY The internship program at Brewer Science is an invigorating experience for students to immerse themselves in an innovative company, encouraging them to explore their interests and passions while growing as an individual. Over 70% of eligible interns at Brewer Science accept full-time positions at NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

SEMICON TAIWAN

SEMICON Taiwan is not just a platform that connects Taiwan and global microelectronics ecosystems but also a bridge that facilitates smooth collaboration between the industry, the government, the academia, and research institutions. Witnessing enormous business collaboration, SEMICON Taiwan still stays true to its missions― Leading Technology Trends, Driving Technology Innovation, and MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is NEW BARC MATERIALS FOR THE 65-NM NODE IN 193-NM LITHOGRAPHY 2.2 Ethyl Lactate Film Strip Test A BARC was spin applied to a silicon wafer at 1,500 rpm for 60 s and baked at 205oC for 60 s.After measuring the film thickness, the BARC-coated wafer was placed on a spinner, flooded with ethyl lactate, and allowed to puddle

BREWER SCIENCE

Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets. Click to Read

More.

PORTAL SIGN UP

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices. ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. PROTEK B3 ALKALINE PROTECTIVE COATINGS Alkaline protective coating. ProTEK ® B3 coatings thin films are spin-applied polymeric coating systems that provide temporary wet-etch protection for CMOS MEMS circuitry during alkaline or acid etches. ProTEK ® B materials offer protection from alkaline solutions such as KOH and TMAH for extended bath etches. Data Sheet.

BREWERBOND® 510

BrewerBOND ® 510 material is applied to a carrier using a simple process and is compatible with ≤ 300°C bonding materials. After processing, a low-force separation is used to debond, and the carrier could potentially be reused. Because the carrier may be reused (depending on metallization processes), this material has a lower cost

of

NISSAN CHEMICAL CORPORATION For nearly 20 years, Brewer Science has licensed its ARC ® material technology to Nissan Chemical. In April 2015, Brewer Science, Inc., and Nissan Chemical Corporation, Ltd., formally extended their business relationship through 2028. This joint agreement focuses on business continuity for customers in Asia by leveraging the combined

strengths

MATERIALS FOR AND PERFORMANCE OF MULTILAYER LITHOGRAPHY combined stack are required to maintain and acceptable level of reflectivity control for high fidelity reproduction of the aerial image. To achieve resolution at 45-nm node and below with 193nm light, an effective numeric aperture (NA) greater than 1.0 is NEW BARC MATERIALS FOR THE 65-NM NODE IN 193-NM LITHOGRAPHY 2.2 Ethyl Lactate Film Strip Test A BARC was spin applied to a silicon wafer at 1,500 rpm for 60 s and baked at 205oC for 60 s.After measuring the film thickness, the BARC-coated wafer was placed on a spinner, flooded with ethyl lactate, and allowed to puddle ARC - ANTI REFLECTIVE COATINGS As the original bottom anti-reflective coatings (BARCs), ARC ® anti-reflective coatings continue to be the industry benchmark for reflection control and light absorption during photolithography. Our proven line of anti-reflective coatings spans all the way from legacy 365-nm (i-line) processes to cutting-edge 193-nm immersion processes. OPTISTACK® MULTILAYER LITHOGRAPHY OptiStack ® multilayer lithography systems are designed for the most advanced high-volume semiconductor manufacturing processes in the world. Our versatile OptiStack ® material set is designed to be used in combination with our proprietary optical modeling to achieve the finest resolutions possible with 193-nm immersion lithography.

YouTube.

BREWERBOND® 305

BrewerBOND ® 305 series materials are organic temporary bonding materials that improve throughput, simplify cleaning, and shorten processing time.The materials are stable in back-end-of-line processing up to 300°C (depending on downstream process parameters). Debonding is efficient and can be done in two ways when paired with an appropriate release material. FOUNDING MEMBER BREWER SCIENCE ANNOUNCES LAUNCH OF THE Rolla, Mo., May 11, 2021 — Brewer Science, an international leader in the microelectronics industry, is thrilled to announce the establishment of the American Materials Technology Partnership. The newly launched coalition recognizes the need for high-quality materials to fuel technological advancement and spur a healthy domestic microelectronics industry. CAREERS IN SCIENCE AND TECHNOLOGY The internship program at Brewer Science is an invigorating experience for students to immerse themselves in an innovative company, encouraging them to explore their interests and passions while growing as an individual. Over 70% of eligible interns at Brewer Science accept full-time positions at QUALITY, ENVIRONMENTAL AND SAFETY Brewer Science has established, and is committed to being a leader in, quality, environmental, and health & safety management systems with a focus on exceeding customer expectations; being conscientious stewards of the environment by advancing sustainability programs and preventing pollution; and providing a healthy, safe, and secure workplace. PROTEK PSB PROTECTIVE COATING ProTEK ® PSB coating is a spin-on replacement for silicon nitride or silicon oxide wet etch masks. Brewer Science ® ProTEK ® PSB coating is used in the creation of inverse pyramidal pits as discussed in SUN Microsystems' technical paper, "Active Demonstration of a Passively Self-Aligned, Multi-Chip Package using Proximity Communication in a SIX STEPS TO STRUCTURED PROBLEM SOLVING This is the most time-consuming, but one of the most vital steps in the process as we take each potential cause and work to rule it out. We must keep working until we have eliminated everything but the root cause. 4. Verify Root Cause. When we think that we have identified the true root cause, we need verify that it is the root cause by testing PROTEK PSB - BREWER SCIENCE www.brewerscience.com Where innovation takes flight!SM BENEFITS ProTEK � PSB-23 Material Spin Speed Curve ProTEK® PSB Photosensitive Alkaline-Protective Material ProTEK® PSB material is a negative-working photosensitive alkaline etch mask that enables bulk silicon micromachining late in the process while preserving BREWER SCIENCE WAFERBOND HT-10 www.brewerscience.com Page 2 8 12 16 20 24 28 32 800 1200 1600 2000 2400 Spin Speed (rpm) for 30 seconds Film Thickness (µm) Spin Speed Curve Brewer Science® WaferBOND® HT-10.10 Temporary Wafer Bonding Material ©2011 Brewer Science, Inc. This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Privacy Policy

.

Accept Decline

Company

About Us Awards Community Giving

Locations What We

Do 40th Anniversary

SustainabilityZero Defects Manufacturing Partnerships Quality, Environmental, and Safety Going Green Research Overview Patents

Processing Theories

Publications

Trademarks

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices.

Learn More

Protective Coatings

Protective CoatingsAlkaline Protective Coatings Photosensitive Protective Coatings Selective Surface Modification All Brewer Science® protective coatings allow micromachining to take place closer to packaging.

Learn More

Lithography

Anti-Reflective Coatings TARC VS BARC Extreme Ultraviolet (EUV)

Multilayer Systems

Our line of products stretches across the whole spectrum of lithography wavelengths and is the most comprehensive product lineup

in the industry.

Learn More

Smart Devices & PE Foundry TechnologiesTemperature Sensors

Moisture Sensors

Printed Interconnect Cables MarketsEnvironmental Monitoring Industrial Monitoring Services Service Capabilities

Electronics Design

At Brewer Science, we are focused on delivering critical, real-time information to our customers to help them achieve their goals, solve their problems, and improve their current systems.

Learn More

Wafer-Level Packaging Bonding Materials BrewerBOND® 305 BrewerBOND® T1100/C1300

WaferBOND®

HT-10.11 and HT-10.12 Materials Build-Up MaterialsBrewerBUILD™ Material Debonding Technologies

BrewerBOND® 530

BrewerBOND® 510

BrewerBOND® 701

Permanent Bonding Materials Brewer Science is revolutionizing wafer-level packaging with innovate bonding and debonding technologies.

Learn More

Careers

Contact

News

Login

Company

COMPANY

Dr. Terry Brewer’s discovery of anti-reflective coatings resulted in a revolution in the global microelectronics industry and ushered in today’s high-speed, lightweight electronic devices.

Learn More

ABOUT US

* Awards

* Community Giving

* Locations

* What We Do

* 40th Anniversary

SUSTAINABILITY

* Zero Defects

* Manufacturing

* Partnerships

* Quality, Environmental, and Safety

* Going Green

RESEARCH

* Overview

* Patents

* Processing Theories

* Publications

* Trademarks

Protective Coatings

PROTECTIVE COATINGS

All Brewer Science® protective coatings allow micromachining to take place closer to packaging.

Learn More

PROTECTIVE COATINGS

* Alkaline Protective Coatings * Photosensitive Protective Coatings SELECTIVE SURFACE MODIFICATION

Lithography

LITHOGRAPHY

Our line of products stretches across the whole spectrum of lithography wavelengths and is the most comprehensive product lineup

in the industry.

Learn More

ANTI-REFLECTIVE COATINGS

* TARC VS BARC

EXTREME ULTRAVIOLET (EUV)

MULTILAYER SYSTEMS

Smart Devices & PE Foundry SMART DEVICES & PE FOUNDRY At Brewer Science, we are focused on delivering critical, real-time information to our customers to help them achieve their goals, solve their problems, and improve their current systems.

Learn More

TECHNOLOGIES

* Temperature Sensors

* Moisture Sensors

* Printed Interconnect Cables

MARKETS

* Environmental Monitoring * Industrial Monitoring

SERVICES

* Service Capabilities * Electronics Design Wafer-Level Packaging WAFER-LEVEL PACKAGING Brewer Science is revolutionizing wafer-level packaging with innovate bonding and debonding technologies.

Learn More

BONDING MATERIALS

* BrewerBOND® 305

* BrewerBOND® T1100/C1300 * WaferBOND® HT-10.11 and HT-10.12 Materials

BUILD-UP MATERIALS

* BrewerBUILD™ Material DEBONDING TECHNOLOGIES

* BrewerBOND® 530

* BrewerBOND® 510

* BrewerBOND® 701

PERMANENT BONDING MATERIALS

Careers

Contact

News

Login

Language

English 简体中文 (Simplified Chinese) 繁體中文 (Traditional Chinese) 日本語 (Japanese) MAKING A DIFFERENCE IN THE WORLD THROUGH OUR PEOPLE & TECHNOLOGY Explore 40 Years of Innovation ZERO DEFECTS MINDSET MATERIALS RIGHT THE FIRST TIME At Brewer Science we focus on technology innovation as a pathway forward by providing the highest quality products to our customers through our focus on zero defects and manufacturing perfection. Our Commitment to Zero Defects

LITHOGRAPHY

PROTECTIVE COATINGS

SMART DEVICES AND PE FOUNDRY WAFER-LEVEL PACKAGING SOLUTIONS FOR EQUIPPING THE TECHNOLOGISTS OF TOMORROW Within our organization, we believe that freedom, combined with clear objectives and commitment to growth, will bring about the biggest

innovations.

Read More About Our Company

WORLD CLASS SUPPORT

Every member of our team is focused on helping our customers reach their technology goals through our results-oriented approach to

problem solving.

Click to Read More

EXPERT RESEARCH CAPABILITIES Brewer Science has been a technology leader in the fields of specialty materials and equipment for micro- and optoelectronics since 1981. By creating innovative products and technologies, Brewer Science maintains a competitive edge in new and future markets.

Click to Read More

MANUFACTURING EXCELLENCE There are reasons top companies engaged in the semiconductor and electronics industries rely on Brewer Science products for their advanced nodes; our promise is to ensure that products supplied by Brewer Science are the most reliable and consistent in the industry.

Click to Read More

SUSTAINABILITY IN THE WORKPLACE Brewer Science is focused on creating quality products and processes that are not harmful to the environment and do not deplete natural resources, and support long-term ecological balance for generations to

come.

Click to Learn More

96 TREES

were saved in 2019 utilizing Brewer Science’s Shred-it program.

386,144 LBS

of solvent waste were diverted from hazardous waste in 2019.

25.75 TONS

of household waste collected

29.57 TONS

of waste materials prevented from winding up in a landfill

Want to Read More?

Going Green at Brewer Science Company Update on COVID-19

Our Anthem

Dr. Terry Brewer's anti-reflective coatings revolutionized microelectronics manufacturing and ushered in today's high-speed lightweight electronic devices... Brewer Science is once again prepared to lead the industry into the next generation! Learn more about our company

LATEST NEWS

Brewer Science Achieves ISO 45001:2018 Brewer Science Recognized as Certified B Corporation Brewer Science's contribution to Missouri State University Foundation inspires technology innovation

UPCOMING EVENTS

TechBlick Year Round Event Series On Emerging Technologies

Email*

First name

Last name

Message*

Ⓒ 2021 Brewer Science, Inc. All Rights Reserved. Equipment | Privacy | Support | Terms of Use | Quality, Environmental and Safety Information Top