Are you over 18 and want to see adult content?
More Annotations
A complete backup of news.now.com/home/local/player?newsId=382193
Are you over 18 and want to see adult content?
A complete backup of www.aksam.com.tr/guncel/sirin-payzin-onlem-yok-dedi-bakan-koca-aninda-yanit-verdi-izin-verirseniz-goruntule
Are you over 18 and want to see adult content?
A complete backup of www.fakt.pl/wydarzenia/polityka/krzysztof-rutkowski-dla-faktu-dorwe-brode-stane-w-obronie-godnosci-patrycji
Are you over 18 and want to see adult content?
Favourite Annotations
A complete backup of https://dramasq.com/cn191207/1.html
Are you over 18 and want to see adult content?
A complete backup of https://sattamatkastore.com/fix-day-figure
Are you over 18 and want to see adult content?
A complete backup of https://beautifier.io/
Are you over 18 and want to see adult content?
A complete backup of https://trikepatrol.com/galleries/micah-photo/
Are you over 18 and want to see adult content?
A complete backup of https://himemix.com/tanpin?c=1&p=13
Are you over 18 and want to see adult content?
Text
BLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGY The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. CONTROL THE BASIC ESC WITH THE ARDUINO SERIAL MONITOR The ESC should arm after a few seconds. 4. Open up the serial monitor by going to “Tools” > “Serial Monitor”. 5. Set the baud rate on the serial monitor to 9600 baud and line ending to “No line ending”. 6. Type in a PWM signal value, 1100 to 1900, in the input field and click “Send” or hit Enter. BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller.CAST ACRYLIC TUBE
In stock. Cast Acrylic Tube - 11.75", 298mm (8" Series) quantity. Add to Cart. SKU: WTE8-P-TUBE-12-R1-RP. HS Code: 3917.32.0050. Description. Product Description. Optically clear, cast acrylic tube for use with Watertight Enclosure for ROV/AUV (8″ Series). If you’re looking for a complete set of parts for an enclosure, wehighly recommend
ELECTRICAL CABLE VOLTAGE DROP CALCULATOR This calculator has inputs for wire gauge (AWG, cmil, mm^2), number of conductors, cable length (m, ft), voltage, and then outputs the voltage drop and efficiency for a given load current or give voltage drop. It's designed for calculating the voltage drop in ROV tether cables but can be used in any generic voltage drop situation! FATHOM-X TETHER INTERFACE FOR LONG-RANGE ETHERNET OVER The Fathom-X Tether Interface Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the Fathom tether, standard Cat5 cable, or even a single twisted pair of wires.This board uses the HomePlug , which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. NEUTRALLY BUOYANT ROV TETHER FOR BLUEROV2 AND OTHER SUBSEA The Fathom Tether is a high quality tether cable designed specifically for ROVs and other subsea applications. It is neutrally buoyant, has 350 lb breaking strength, and is embedded with water-blocking fibers to seal any leaks. The tether has a diameter of 7.6mm and is slimmer than the vast majority of comparable ROV tethers. O-RING FLANGE (8" SERIES) HS Code: 7616.10.70.30. Description. Product Description. This flange has an O-ring seal that fits in the tube of the Watertight Enclosure for ROV/AUV (8″ Series). The modular design allows a variety of end-caps to be attached to the flange. If you’re looking for a complete set of parts for an enclosure, we highly recommend using theBLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGY The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. CONTROL THE BASIC ESC WITH THE ARDUINO SERIAL MONITOR The ESC should arm after a few seconds. 4. Open up the serial monitor by going to “Tools” > “Serial Monitor”. 5. Set the baud rate on the serial monitor to 9600 baud and line ending to “No line ending”. 6. Type in a PWM signal value, 1100 to 1900, in the input field and click “Send” or hit Enter. BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller.CAST ACRYLIC TUBE
In stock. Cast Acrylic Tube - 11.75", 298mm (8" Series) quantity. Add to Cart. SKU: WTE8-P-TUBE-12-R1-RP. HS Code: 3917.32.0050. Description. Product Description. Optically clear, cast acrylic tube for use with Watertight Enclosure for ROV/AUV (8″ Series). If you’re looking for a complete set of parts for an enclosure, wehighly recommend
ELECTRICAL CABLE VOLTAGE DROP CALCULATOR This calculator has inputs for wire gauge (AWG, cmil, mm^2), number of conductors, cable length (m, ft), voltage, and then outputs the voltage drop and efficiency for a given load current or give voltage drop. It's designed for calculating the voltage drop in ROV tether cables but can be used in any generic voltage drop situation! FATHOM-X TETHER INTERFACE FOR LONG-RANGE ETHERNET OVER The Fathom-X Tether Interface Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the Fathom tether, standard Cat5 cable, or even a single twisted pair of wires.This board uses the HomePlug , which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. NEUTRALLY BUOYANT ROV TETHER FOR BLUEROV2 AND OTHER SUBSEA The Fathom Tether is a high quality tether cable designed specifically for ROVs and other subsea applications. It is neutrally buoyant, has 350 lb breaking strength, and is embedded with water-blocking fibers to seal any leaks. The tether has a diameter of 7.6mm and is slimmer than the vast majority of comparable ROV tethers. O-RING FLANGE (8" SERIES) HS Code: 7616.10.70.30. Description. Product Description. This flange has an O-ring seal that fits in the tube of the Watertight Enclosure for ROV/AUV (8″ Series). The modular design allows a variety of end-caps to be attached to the flange. If you’re looking for a complete set of parts for an enclosure, we highly recommend using the WETLINK PENETRATOR ASSEMBLY GUIDE The WetLink Penetrator (WLP) is our next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables. This guide will show you how to assemble a WetLink Penetrator using our WLP assembly tools or common hand tools. SOFTWARE AND HARDWARE Software and Hardware Blue Robotics embraces open-source software and hardware whenever possible. We strive to create products that are open, easy to use, and contributed to by a global community. The following are our open-source hardware projects and open-source software projects, libraries, and drivers. Software for ROVs and AUVs ArduSub ROV Control Software: ArduSub ArduSub INTRODUCING WETLINK AND THE WETLINK PENETRATOR! The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to other subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that WETLINK COMPRESSION GLAND PENETRATOR FOR SUBSEA ELECTRICAL Despite the simplicity of the concept, we’ve put a lot of attention into the details to ensure absolute reliability. The WetLink Penetrator was put through a rigorous testing and validation process in which we tested thousands of samples through extreme conditions: high pressure, hot and cold temperatures, high electrical current, accelerated aging, and mechanical strain. BLUEROV2 SOFTWARE, COMPUTER, AND JOYSTICK SETUP INSTRUCTIONS 1. Plug a fully charged battery into the ROV and connect the tether to your computer. 2. Navigate to 192.168.2.2:2770/network in your browser and ensure that the ROV has access to a WiFi network. If you do not see a webpage at this address, you need to perform the update according to the instructions here. 3. T200 THRUSTER FOR ROVS, AUVS, AND MARINE ROBOTICS T200 Thruster. From: $ 179.00. The T200 Thruster is the world’s most popular underwater thruster for ROVs, AUVs, surface vessels, and more! Its patented flooded motor design makes it powerful, efficient, compact, and affordable. The T200 is in use on thousands of marine robotic vehicles around the world including the BlueROV2. CONTROL THE BASIC ESC WITH A POTENTIOMETER AND ARDUINO The world's most popular thruster for ROVs, AUVs, and more. Basic ESC. Electronic speed controller for the T200 Thruster. $ 27.00 Add to Cart. You will also need: Arduino Microcontroller (This tutorial uses an Arduino Uno) 1 x 10k ohm Potentiometer (center detent recommended) 1 x USB A to B cable (to connect your Arduino to a computer) 2 x male ULTRA-HIGH RESOLUTION PRESSURE/DEPTH SENSOR FOR 10M DEPTH The Bar02 Ultra-High Resolution 10m Depth/Pressure Sensor is a low-pressure, high resolution, high accuracy version of our Bar30 sensor. Using the MS5837-02BA sensor from Measurement Specialties, this device can measure up to 10 meter depth (2 bar absolute pressure)with a
CAST ACRYLIC TUBE
Cast Acrylic Tube – 11.75″, 298mm (4″ Series) $ 90.00. This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure. In stock. Cast Acrylic Tube - 11.75", 298mm (4" DEPTH/PRESSURE SENSOR FOR 300M DEPTH WITH 2MM RESOLUTION This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. This board-level version can be tightly integrated into projects. The Bar30 pressure sensor is a high-pressure, high-resolution pressure sensor. With 0.2 bar resolution, it has an amazing depth measurement resolution of 2mm inthe water column!
BLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGY The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. BLUEROV2 - AFFORDABLE AND CAPABLE UNDERWATER ROV The BlueROV2 is the world's most affordable high-performance subsea vehicle. With vectored thrusters it's the perfect ROV for inspections, aquaculture, research, and exploring! Open source software and flexible hardware make it easy to modify and customize for yourapplication.
CAST ACRYLIC TUBE
In stock. Cast Acrylic Tube - 11.75", 298mm (8" Series) quantity. Add to Cart. SKU: WTE8-P-TUBE-12-R1-RP. HS Code: 3917.32.0050. Description. Product Description. Optically clear, cast acrylic tube for use with Watertight Enclosure for ROV/AUV (8″ Series). If you’re looking for a complete set of parts for an enclosure, wehighly recommend
BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller. ELECTRICAL CABLE VOLTAGE DROP CALCULATOR This calculator has inputs for wire gauge (AWG, cmil, mm^2), number of conductors, cable length (m, ft), voltage, and then outputs the voltage drop and efficiency for a given load current or give voltage drop. It's designed for calculating the voltage drop in ROV tether cables but can be used in any generic voltage drop situation! FATHOM-X TETHER INTERFACE FOR LONG-RANGE ETHERNET OVER The Fathom-X Tether Interface Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the Fathom tether, standard Cat5 cable, or even a single twisted pair of wires.This board uses the HomePlug , which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. NEUTRALLY BUOYANT ROV TETHER FOR BLUEROV2 AND OTHER SUBSEA The Fathom Tether is a high quality tether cable designed specifically for ROVs and other subsea applications. It is neutrally buoyant, has 350 lb breaking strength, and is embedded with water-blocking fibers to seal any leaks. The tether has a diameter of 7.6mm and is slimmer than the vast majority of comparable ROV tethers. O-RING FLANGE (8" SERIES) HS Code: 7616.10.70.30. Description. Product Description. This flange has an O-ring seal that fits in the tube of the Watertight Enclosure for ROV/AUV (8″ Series). The modular design allows a variety of end-caps to be attached to the flange. If you’re looking for a complete set of parts for an enclosure, we highly recommend using theBLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGY The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. BLUEROV2 - AFFORDABLE AND CAPABLE UNDERWATER ROV The BlueROV2 is the world's most affordable high-performance subsea vehicle. With vectored thrusters it's the perfect ROV for inspections, aquaculture, research, and exploring! Open source software and flexible hardware make it easy to modify and customize for yourapplication.
CAST ACRYLIC TUBE
In stock. Cast Acrylic Tube - 11.75", 298mm (8" Series) quantity. Add to Cart. SKU: WTE8-P-TUBE-12-R1-RP. HS Code: 3917.32.0050. Description. Product Description. Optically clear, cast acrylic tube for use with Watertight Enclosure for ROV/AUV (8″ Series). If you’re looking for a complete set of parts for an enclosure, wehighly recommend
BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller. ELECTRICAL CABLE VOLTAGE DROP CALCULATOR This calculator has inputs for wire gauge (AWG, cmil, mm^2), number of conductors, cable length (m, ft), voltage, and then outputs the voltage drop and efficiency for a given load current or give voltage drop. It's designed for calculating the voltage drop in ROV tether cables but can be used in any generic voltage drop situation! FATHOM-X TETHER INTERFACE FOR LONG-RANGE ETHERNET OVER The Fathom-X Tether Interface Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the Fathom tether, standard Cat5 cable, or even a single twisted pair of wires.This board uses the HomePlug , which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. NEUTRALLY BUOYANT ROV TETHER FOR BLUEROV2 AND OTHER SUBSEA The Fathom Tether is a high quality tether cable designed specifically for ROVs and other subsea applications. It is neutrally buoyant, has 350 lb breaking strength, and is embedded with water-blocking fibers to seal any leaks. The tether has a diameter of 7.6mm and is slimmer than the vast majority of comparable ROV tethers. O-RING FLANGE (8" SERIES) HS Code: 7616.10.70.30. Description. Product Description. This flange has an O-ring seal that fits in the tube of the Watertight Enclosure for ROV/AUV (8″ Series). The modular design allows a variety of end-caps to be attached to the flange. If you’re looking for a complete set of parts for an enclosure, we highly recommend using the H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. BLUEROV2 SOFTWARE, COMPUTER, AND JOYSTICK SETUP INSTRUCTIONS 1. Plug a fully charged battery into the ROV and connect the tether to your computer. 2. Navigate to 192.168.2.2:2770/network in your browser and ensure that the ROV has access to a WiFi network. If you do not see a webpage at this address, you need to perform the update according to the instructions here. 3. INTRODUCING WETLINK AND THE WETLINK PENETRATOR! The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to other subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that UNDERWATER SONAR AND ALTIMETER WITH ARDUINO It can be used as an altimeter for ROVs and AUVs, for bathymetry work aboard a USV, as an obstacle avoidance sonar, and more. It communicates over serial, so it’s compatible with an Arduino or any other microcontroller. Ping Sonar Altimeter and Echosounder. 30 m range, 30 degree beamwidth, serial communication. From: $ 279.00 Addto Cart.
CONTROL THE BASIC ESC WITH THE ARDUINO SERIAL MONITOR The ESC should arm after a few seconds. 4. Open up the serial monitor by going to “Tools” > “Serial Monitor”. 5. Set the baud rate on the serial monitor to 9600 baud and line ending to “No line ending”. 6. Type in a PWM signal value, 1100 to 1900, in the input field and click “Send” or hit Enter. 4TH ANNUAL(ISH) CUSTOMER SURVEY + 2018 (!) RESULTS We were also curious about your overall impression of the BlueROV2 – as seen from the section above, you are using the BlueROV2 and components in ways we never could have imagined. The results imply that the BlueROV2 and components are equally suitable for academic, professional, and recreational useand we’re pretty sure these thruster powered swans could be categorized as all of WETLINK PENETRATOR PLUG WRENCH FOR WLP ASSEMBLY We are happy to assist with technical questions, but before you ask, please make sure that your question hasn’t already been answered on the product pages, guides, or community forums.If you still can’t find what you’re looking for, shoot us an email at . WETLINK PENETRATOR ASSEMBLY BLOCK The WetLink Penetrator Assembly Block helps you assemble the WetLink Penetrator with ease by holding the bulkhead while the plug is tightened. It has three cavities to hold different sizes of bulkhead: M06, M10, and M14. The assembly block is made from anodized aluminumand
CABLE BULKHEAD WRENCH (R1 STYLE) The cable penetrators have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 14-hole end-cap used on the BlueROV2.This specially designed wrench makes it easy to tighten penetrators in tight spaces. WETLINK PENETRATOR SPARE SEALS We are happy to assist with technical questions, but before you ask, please make sure that your question hasn’t already been answered on the product pages, guides, or community forums.If you still can’t find what you’re looking for, shoot us an email at .BLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGYBLUE ROBOTICS INCBLUE ROBOTICS T200 THRUSTERT100 THRUSTER The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease ALL SONAR - BLUE ROBOTICS Sonar. Back to Sensors, Sonars, and Cameras /. Ping360 Scanning Imaging Sonar. Navigation and imaging sonar for BlueROV2 and other ROVs. $ 1,975.00 Add to Cart. Ping Sonar Altimeter and Echosounder. 30 m range, 30 degree beamwidth, serial communication. From: $ 279.00 Addto Cart.
BLUEROV2 - AFFORDABLE AND CAPABLE UNDERWATER ROV The BlueROV2 is the world's most affordable high-performance subsea vehicle. With vectored thrusters it's the perfect ROV for inspections, aquaculture, research, and exploring! Open source software and flexible hardware make it easy to modify and customize for yourapplication.
BLUEROV2 SOFTWARE, COMPUTER, AND JOYSTICK SETUP INSTRUCTIONS 1. Plug a fully charged battery into the ROV and connect the tether to your computer. 2. Navigate to 192.168.2.2:2770/network in your browser and ensure that the ROV has access to a WiFi network. If you do not see a webpage at this address, you need to perform the update according to the instructions here. 3. CONTROL THE BASIC ESC WITH THE ARDUINO SERIAL MONITOR The ESC should arm after a few seconds. 4. Open up the serial monitor by going to “Tools” > “Serial Monitor”. 5. Set the baud rate on the serial monitor to 9600 baud and line ending to “No line ending”. 6. Type in a PWM signal value, 1100 to 1900, in the input field and click “Send” or hit Enter. H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. T200 THRUSTER FOR ROVS, AUVS, AND MARINE ROBOTICS T200 Thruster. From: $ 179.00. The T200 Thruster is the world’s most popular underwater thruster for ROVs, AUVs, surface vessels, and more! Its patented flooded motor design makes it powerful, efficient, compact, and affordable. The T200 is in use on thousands of marine robotic vehicles around the world including the BlueROV2. BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller. T200 BLUEROV2 SPARE (WITH PENETRATOR AND SHORT CABLE) T200 BlueROV2 Spare (with penetrator and short cable) UPDATED. $ 189.00. This T200 comes with a slightly shorter cable and a pre-installed cable penetrator and is a drop-in replacement for the thrusters on the BlueROV2. It’s also included in the BlueROV2 Spares Kit. Propeller Direction. Choose an option Clockwise CounterclockwiseClear. In stock.
BLUE ROBOTICS
The leader in affordable remotely operated underwater vehicle (ROVs) like the BlueROV2, Blue Robotics also provides ROV thrusters, sonars, enclosures, and subsea cameras. BLUE ROBOTICS THRUSTER TECHNOLOGYBLUE ROBOTICS INCBLUE ROBOTICS T200 THRUSTERT100 THRUSTER The BlueRobotics T100 and T200 (patented) are, in essence, brushless electric motors. The unique thing about them is that all of their components are sealed from water by a protective coating and the motor is tightly integrated with the propeller and nozzle to create the most compact design possible. This design eliminates seals, oil, grease ALL SONAR - BLUE ROBOTICS Sonar. Back to Sensors, Sonars, and Cameras /. Ping360 Scanning Imaging Sonar. Navigation and imaging sonar for BlueROV2 and other ROVs. $ 1,975.00 Add to Cart. Ping Sonar Altimeter and Echosounder. 30 m range, 30 degree beamwidth, serial communication. From: $ 279.00 Addto Cart.
BLUEROV2 - AFFORDABLE AND CAPABLE UNDERWATER ROV The BlueROV2 is the world's most affordable high-performance subsea vehicle. With vectored thrusters it's the perfect ROV for inspections, aquaculture, research, and exploring! Open source software and flexible hardware make it easy to modify and customize for yourapplication.
BLUEROV2 SOFTWARE, COMPUTER, AND JOYSTICK SETUP INSTRUCTIONS 1. Plug a fully charged battery into the ROV and connect the tether to your computer. 2. Navigate to 192.168.2.2:2770/network in your browser and ensure that the ROV has access to a WiFi network. If you do not see a webpage at this address, you need to perform the update according to the instructions here. 3. CONTROL THE BASIC ESC WITH THE ARDUINO SERIAL MONITOR The ESC should arm after a few seconds. 4. Open up the serial monitor by going to “Tools” > “Serial Monitor”. 5. Set the baud rate on the serial monitor to 9600 baud and line ending to “No line ending”. 6. Type in a PWM signal value, 1100 to 1900, in the input field and click “Send” or hit Enter. H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. T200 THRUSTER FOR ROVS, AUVS, AND MARINE ROBOTICS T200 Thruster. From: $ 179.00. The T200 Thruster is the world’s most popular underwater thruster for ROVs, AUVs, surface vessels, and more! Its patented flooded motor design makes it powerful, efficient, compact, and affordable. The T200 is in use on thousands of marine robotic vehicles around the world including the BlueROV2. BASIC ESC (ELECTRONIC SPEED CONTROLLER) FOR THRUSTERS AND HS Code: 8504.40.40. Description. Product Description. An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T200 thruster and runs the BLHeli_S firmware. Key Features. Simple, robust brushless electronic speed controller. T200 BLUEROV2 SPARE (WITH PENETRATOR AND SHORT CABLE) T200 BlueROV2 Spare (with penetrator and short cable) UPDATED. $ 189.00. This T200 comes with a slightly shorter cable and a pre-installed cable penetrator and is a drop-in replacement for the thrusters on the BlueROV2. It’s also included in the BlueROV2 Spares Kit. Propeller Direction. Choose an option Clockwise CounterclockwiseClear. In stock.
H6 PRO CHARGER FIRMWARE UNLOCK GUIDE 1. Connect the H6 Pro charger to the computer using a micro USB cable. Do not power on the charger at this time. 2. Run the HOTA HTLoader Firmware Update software and click “Open”. 3. Navigate to the folder where the firmware file was extracted to and select the firmware (.prg) file. 4. WETLINK PENETRATOR PLUG WRENCH FOR WLP ASSEMBLY We are happy to assist with technical questions, but before you ask, please make sure that your question hasn’t already been answered on the product pages, guides, or community forums.If you still can’t find what you’re looking for, shoot us an email at . CABLE BULKHEAD WRENCH (R1 STYLE) The cable penetrators have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 14-hole end-cap used on the BlueROV2.This specially designed wrench makes it easy to tighten penetrators in tight spaces. WETLINK PENETRATOR SPARE SEALS We are happy to assist with technical questions, but before you ask, please make sure that your question hasn’t already been answered on the product pages, guides, or community forums.If you still can’t find what you’re looking for, shoot us an email at . WATER PRESSURE AND DEPTH CALCULATOR AT BLUE ROBOTICS Calculator. This calculator determines the water depth to reach a given pressure or the pressure at a given depth. You can enter the depth or pressure input with most common units and it will be converted automatically. This calculator does not add air pressure at the surface – the results are relative to the surface pressure. WETLINK PENETRATOR ASSEMBLY BLOCK The WetLink Penetrator Assembly Block helps you assemble the WetLink Penetrator with ease by holding the bulkhead while the plug is tightened. It has three cavities to hold different sizes of bulkhead: M06, M10, and M14. The assembly block is made from anodized aluminumand
BINDER 770 BULKHEAD CONNECTOR HS Code: 8536.49.0050. Description. Product Description. The Binder 770 connector is our standard connector for tether connections above the water. The connectors have 8 pins, are IP67 splashproof when mated, reasonably priced, and compact. This Binder 770 bulkhead connector can be mounted in a spare hole on the FXTI for your customconnections.
FATHOM-X TETHER INTERFACE FOR LONG-RANGE ETHERNET OVER The Fathom-X Tether Interface Boards provide a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the Fathom tether, standard Cat5 cable, or even a single twisted pair of wires.This board uses the HomePlug , which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. UNDERWATER SONAR AND ALTIMETER WITH ARDUINO It can be used as an altimeter for ROVs and AUVs, for bathymetry work aboard a USV, as an obstacle avoidance sonar, and more. It communicates over serial, so it’s compatible with an Arduino or any other microcontroller. Ping Sonar Altimeter and Echosounder. 30 m range, 30 degree beamwidth, serial communication. From: $ 279.00 Addto Cart.
CONTROL THE BASIC ESC WITH A POTENTIOMETER AND ARDUINO The world's most popular thruster for ROVs, AUVs, and more. Basic ESC. Electronic speed controller for the T200 Thruster. $ 27.00 Add to Cart. You will also need: Arduino Microcontroller (This tutorial uses an Arduino Uno) 1 x 10k ohm Potentiometer (center detent recommended) 1 x USB A to B cable (to connect your Arduino to a computer) 2 x male__
Search
__
Log In My Account
Log Out
0
MENUMENU
*
Search
* BlueROV2
* Components
* Components
* BlueROV2
* BlueROV2
* BlueROV2
* Accessories and Add-ons * Components and Spares* Upgrade Kits
* Thrusters, Actuators, and Lights * Thrusters, Actuators, and Lights* Grippers
* Lights and Indicators * Speed Controllers (ESCs)* Thrusters
* Sensors, Sonars, and Cameras * Sensors, Sonars, and Cameras* Cameras
* Leak Sensor
* Sonar
* Temperature, Pressure, and Depth* Underwater GPS
* Communication, Control, and Power * Communication, Control, and Power* Acoustic Modems
* Power Supplies, Batteries, and Chargers * Computers and Control Electronics * Interface Electronics* Switch
* Cables, Penetrators, and Connectors * Cables, Penetrators, and Connectors * Cables and Tethers* Connectors
* Penetrators
* Potting Compound and Tools* Tether Management
* Enclosures, Buoyancy, and Ballast * Enclosures, Buoyancy, and Ballast* 2" Series
* 3" Series
* 4" Series
* 6" Series
* 8" Series
* Ballast Weight
* Buoyancy Foam
* Enclosure Tools and Supplies* Educational
* Educational
* Books
* Guides
* Forums
* Browse All Products __* Learn
* Learn
* BlueROV2
* BlueROV2
* Buyer's Guide
* Assembly Guide
* Software Setup
* Operation Guide
* User Videos on Youtube __ * Open Source Software * Open Source Software * ArduSub ROV Control System* Ping-Viewer
* Open Source Software on Github __* Community Forums
* Community Forums
* General Discussion* Dive Log
* BlueROV2 and ArduSub* Product Support
* Build
* Browse the Forums __* Popular Guides
* Popular Guides
* What is an ROV?
* The Term "Underwater Drone" * Understanding and Using Scanning Sonars * Assembling the Advanced Electronics Package * Using an RC Transmitter* See All Guides __
* Resources
* Resources
* Pressure-to-Depth Calculator * Buoyancy Calculator * Pressure Vessel Design * Voltage Drop Calculator * Blue Robotics Connector Standard * Browse All Guides __* Support
* Support
*
*
*
QUESTIONS ABOUT ORDERING OR SHIPPING? Information regarding orders, purchase orders, and shipping can be found on our Ordering and Shipping page . If you can’t find the answer to your question there, you can contact us directly at sales@bluerobotics.com.*
NEED A QUOTE?
You can request a quotation directly on our website! Add the items to your cart, proceed to the checkout page, and instead of entering a payment method, select _Request a Quote_. You’ll receive the official quotation in a separate email.*
TECHNICAL QUESTIONS? We are happy to assist with technical questions, but before you ask, please make sure that your question hasn’t already been answered on the product pages, guides , or community forums . If you still can’t find what you’re looking for, shoot us an email at support@bluerobotics.com.*
*
WHERE WE ARE
We don’t have a public storefront, but if you need our address for any reason, it’s below. If you’d like to arrange a visit sometime,please let us know!
*
BLUE ROBOTICS
2740 California St
Torrance, CA 90503
USA
*
* Our Company
* Our Company
* About
* Blog
* Distributors
* Education
* Careers
* Contact
* __
* __
* Log In
* My Account
* 0
*
____BlueROV2
BlueROV2
Accessories and
Add-ons
Components
and Spares
Upgrade
Kits
*
____Thrusters, Actuators, and LightsGrippers
Lights
Motors
Speed
Controllers (ESCs)
Thrusters
*
____Sensors, Sonars, and CamerasCameras
Leak
Sensor
Sonar
Temperature,
Pressure, and Depth
Underwater
GPS
*
____Communication, Control, and PowerAcoustic Modems
Computers
and Control ElectronicsInterface
Electronics
Power
Supplies, Batteries, and ChargersSwitch
*
____Cables, Penetrators, and ConnectorsCables and Tethers
Connectors
Penetrators
Potting
Compound and Tools
Tether
Management
*
____Enclosures, Buoyancy, and Ballast2″ Series
3″
Series
4″
Series
6″
Series
8″
Series
Ballast
Weight
Buoyancy
Foam
Enclosure
Tools and Supplies
*
____Educational
Books
*
____Learn
BlueROV2 Guides Open Source Software ForumsPopular Guides
Resources
Browse All Guides
*
____Our Company
About Blog
Distributors
Careers
Contact
UNDERWATER.
ABOVE EXPECTATIONS.
THE WORLD'S MOST AFFORDABLE HIGH-PERFORMANCE ROV AND MARINE ROBOTICS COMPONENTS. Explore BlueROV2 Explore Components Credit: Jeff MilisenGAME-CHANGING COST
Our constant focus on cost and accessibility make our thrusters, components, and underwater ROV the most affordable on the market. FLEXIBLE & EXPANDABLE Straightforward designs with open source software and hardware allow for customization, modification, and reconfiguration. A COMMUNITY OF EXPLORERS Our products come with clear documentation and resources as well as a diverse community of subsea explorers, hobbyists, and professionalusers.
ENABLING OCEAN EXPLORATION ENABLING OCEAN EXPLORATIONTHE _BLUEROV2_
Modifiable and expandable for a vast range of applications. Credit: Nick Hawkins THE NEWTON SUBSEA GRIPPER A single function manipulator designed to help the BlueROV2 and other subsea vehicles to interact with the subsea environment to retrieve objects, attach recovery lines, and more! DISTRIBUTORS AROUND THE WORLD Learn more about the capabilities of our network of partners! Credit: https://bluerobotics.com/distributors/ 3 ALTERNATE WAYS TO EXTEND THE RUN TIME OF THE BLUEROV2PRODUCTS
VIEW ALL COMPONENTS ON THE STORE __T200 THRUSTER
The world's most popular thruster for ROVs, AUVs, and more$179
Select Options
PING360 SCANNING IMAGING SONAR Navigation and imaging sonar for BlueROV2 and other ROVs$1975
Select Options
FATHOM SPOOL
Slip-ring spool/reel for the Fathom Tether$519
Select Options
NEWTON SUBSEA GRIPPER Single function manipulator for ROVs$439
Select Options
VISIT THE STORE
SUBSCRIBE TO OUR EMAIL LIST FOR UPDATESSubscribe
Products
* BlueROV2
* BlueROV2 Parts, Accessories, and Upgrades * Thrusters, Actuators, and Lights * Sensors, Sonars, and Cameras * Communication, Control, and Power * Cables, Penetrators, and Connectors * Enclosures, Buoyancy, and Ballast* Educational
Learn
* Forums
* BlueROV2 Guides
* Resources
* Popular Guides
* View All Guides
Our Company
* About
* Blog
* Distributors
* Education
* Careers
* Contact
Copyright 2021 – Blue Robotics Inc | Terms & Conditions| |
Privacy Policy
|
| Site by Echo FactoryDetails
Copyright © 2024 ArchiveBay.com. All rights reserved. Terms of Use | Privacy Policy | DMCA | 2021 | Feedback | Advertising | RSS 2.0