HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and

HENRY COMPANY

Henry FOILSKIN are self-adhering weather barrier membranes consisting of an SBS rubberized asphalt compound. Integrally laminated to a white, UV resistant foil/composite film, FOILSKIN is specially designed to be self-adhered to a prepared substrate, providing a durable air, vapor and weather barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. HENRY® 925 BES SEALANT Henry ® 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement.. Features. Provides excellent weathering resistance, flexibility and very low VOC through use of a silyl-terminated polyether polymer (STPE)

ROOT BLOC - HENRY

Root Bloc 20 secondary root barrier material is an optional addition to prevent against root penetration.Typicall used for intensive VRAs or green roofs. Root Bloc is a flexible, polymeric alloy geomembrane liner. This flexible roofing membrane does not contain pesticides.

AIR-BLOC® 33MR

Henry Air-Bloc ® 33MR is a UV-resistant, one-component, elastomeric membrane that provides an air barrier on a range of construction surfaces. Liquid-applied with a trowel or spray, Air-Bloc ® 33MR cures to a tough, monolithic rubber-like membrane that resists air leakage along with UV radiation and weather.. Features. Seamless, UV-resistant elastomeric membrane bridges cracks

BLUESKIN® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Henry® Drain Board products consist of multiple components designed to enhance the performance of Henry® protected membrane roofing , waterproofing systems, and Henry Green Roof applications HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. HENRY® 925 BES SEALANT Henry ® 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement.. Features. Provides excellent weathering resistance, flexibility and very low VOC through use of a silyl-terminated polyether polymer (STPE)

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

HENRY® DRAIN BOARD

Henry® Drain Board products consist of multiple components designed to enhance the performance of Henry® protected membrane roofing , waterproofing systems, and Henry Green Roof applications HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. HENRY® 925 BES SEALANT Henry ® 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement.. Features. Provides excellent weathering resistance, flexibility and very low VOC through use of a silyl-terminated polyether polymer (STPE)

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

HENRY COMPANY

Henry FOILSKIN are self-adhering weather barrier membranes consisting of an SBS rubberized asphalt compound. Integrally laminated to a white, UV resistant foil/composite film, FOILSKIN is specially designed to be self-adhered to a prepared substrate, providing a durable air, vapor and weather barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building WEATHERSMART® DRAINABLE WeatherSmart Drainable offers architects, specifiers and builders an advanced drainage solution that actually channels liquid away from the wall assembly at greater than 95% efficiency. This is far better performance than that required by any code in the country, even in Oregon. With a balance of breathability and water protection, WeatherSmart Drainable is well-suited to most climates and HENRY® 925 BES SEALANT Henry ® 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement.. Features. Provides excellent weathering resistance, flexibility and very low VOC through use of a silyl-terminated polyether polymer (STPE)

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility.

BLUESKIN® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

HENRY COMPANY

Stone Mason ® Premium Concrete Sealer protects and maintains the appearance of concrete floors, paving stones, quarry tiles, masonry, concrete blocks and bricks. This extremely durable, water-based clear acrylic sealer helps reduce dust accumulation on concrete and resists gasoline, motor oil and automotive chemicals. BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain

WHITE ROOF COATING

Henry’s white roof coating products, offered in silicone, acrylic and solvent-based formulations, reduce energy costs, extend roof service life and improve occupant comfort.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30

minutes.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

790-11 HOT RUBBERIZED ASPHALT Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. Henry also offers an environmentally friendly 790-11 hot rubberized asphalt that contains at least 25% post consumer recycled

content.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain

WHITE ROOF COATING

Henry’s white roof coating products, offered in silicone, acrylic and solvent-based formulations, reduce energy costs, extend roof service life and improve occupant comfort.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30

minutes.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® SA

Schedule a meeting →. Blueskin ® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin ® SA is designed to install easily on a variety of prepared substrates.. Features. SBS-modified membrane is flexible at low

temperatures

790-11 HOT RUBBERIZED ASPHALT Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. Henry also offers an environmentally friendly 790-11 hot rubberized asphalt that contains at least 25% post consumer recycled

content.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier. HENRY_HOMEPAGE ICONS Henry ® Company is the most complete provider of Building Envelope Systems ® that control the flow of water, air, vapor and energy in a building.. From the tallest commercial structures to small single family homes we have the right solutions for below grade, walls and roofs. Learn More→

HENRY COMPANY

Henry ® Company, a leader in Building Envelope Systems ®, has agreed to acquire Fortifiber ®, LLC, a leading manufacturer of weather-resistive moisture management systems, including housewrap, building paper and flashing tapes. >> Learn more today! Sustainability. LEED, or Leadership in Energy & Environmental Design, is transforming the way

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours.

HENRY COMPANY

Features. SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability. Non-woven polyester 180g/m² reinforcement. Designed for application in new construction, re-roofing and retrofit roofing. Excellent tear

resistance.

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor

AIR-BLOC® 33MR

Henry Air-Bloc ® 33MR is a UV-resistant, one-component, elastomeric membrane that provides an air barrier on a range of construction surfaces. Liquid-applied with a trowel or spray, Air-Bloc ® 33MR cures to a tough, monolithic rubber-like membrane that resists air leakage along with UV radiation and weather.. Features. Seamless, UV-resistant elastomeric membrane bridges cracks

SALES REP LOCATOR

Residential and Light Commercial Building Envelope Systems®. Commercial Building Envelope Systems ®. Fortifiber ® 1-2-3 Moisture Control System. Weather-resistive barriers Window and door flashings Sealants Weather-resistive air barriers and accessories. Foundation

systems

790-11 HOT RUBBERIZED ASPHALT Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. Henry also offers an environmentally friendly 790-11 hot rubberized asphalt that contains at least 25% post consumer recycled

content.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOF Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOF Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30

minutes.

HENRY SHEATHING AND COMMERCIAL TAPE Henry Sheathing Tape was specifically designed to work with all of Fortifiber’s weather-resistive barriers – Jumbo Tex ®, Hydro Tex™, PlyDry ®, and WeatherSmart ®.By using Fortifiber Sheathing Tape you are able to take advantage of the air barrier properties of these building wraps while increasing their ability to protect against

moisture intrusion.

HENRY COMPANY

Rinse surface clean with fresh water and let thoroughly dry. Apply a thin, uniform coating of sealer, using either a deep-piled roller, brush or low-pressure sprayer. For maximum durability and resistance to spills, two coats are recommended. Let dry at least one hour between coats and before allowing traffic.

HENRY COMPANY

Stone Mason ® Premium Concrete Patch is a water-based mix specially formulated for the repair of holes, cracks and other small imperfections in concrete or masonry surfaces. Offering superior bonding vs. conventional cement patches, Stone Mason ® Premium Concrete Patch is also excellent for tuckpointing masonry and brickwork, and as an adhesive to bind broken pieces of concrete or

brick.

FORTIFLASH - HENRY

FortiFlash is engineered to deliver lasting protection against water intrusion in the most demanding environmental conditions. It is the premium self-adhesive waterproof flashing membrane for windows. It is also ideally suited for flashing non-roofing horizontal conditions such as pot shelves, parapets, sill pans and recessed windows. Its strong adhesion makes it a perfect choice for sealing

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 203 ROLL ROOFING ADHESIVE Henry ® 203 Roll Roofing Adhesive is a premium, brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. As a replacement for hot asphalt in built-up roofing (BUR) applications, Henry 203 Roll Roofing Adhesive is designed for BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30

minutes.

HENRY SHEATHING AND COMMERCIAL TAPE Henry Sheathing Tape was specifically designed to work with all of Fortifiber’s weather-resistive barriers – Jumbo Tex ®, Hydro Tex™, PlyDry ®, and WeatherSmart ®.By using Fortifiber Sheathing Tape you are able to take advantage of the air barrier properties of these building wraps while increasing their ability to protect against

moisture intrusion.

HENRY COMPANY

Rinse surface clean with fresh water and let thoroughly dry. Apply a thin, uniform coating of sealer, using either a deep-piled roller, brush or low-pressure sprayer. For maximum durability and resistance to spills, two coats are recommended. Let dry at least one hour between coats and before allowing traffic.

FORTIFLASH - HENRY

FortiFlash is engineered to deliver lasting protection against water intrusion in the most demanding environmental conditions. It is the premium self-adhesive waterproof flashing membrane for windows. It is also ideally suited for flashing non-roofing horizontal conditions such as pot shelves, parapets, sill pans and recessed windows. Its strong adhesion makes it a perfect choice for sealing

HENRY COMPANY

Stone Mason ® Premium Concrete Patch is a water-based mix specially formulated for the repair of holes, cracks and other small imperfections in concrete or masonry surfaces. Offering superior bonding vs. conventional cement patches, Stone Mason ® Premium Concrete Patch is also excellent for tuckpointing masonry and brickwork, and as an adhesive to bind broken pieces of concrete or

brick.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 203 ROLL ROOFING ADHESIVE Henry ® 203 Roll Roofing Adhesive is a premium, brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. As a replacement for hot asphalt in built-up roofing (BUR) applications, Henry 203 Roll Roofing Adhesive is designed for BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Product Description. Installation and. Technical Literature. Henry Drain Board products consist of multiple components designed to enhance the performance of Henry/Bakor waterproofing systems and protected membrane roofing. Henry Drain Board consists of a polypropylene core combined with a filter fabric. There a serveral types of Henry Drain HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30

minutes.

HENRY SHEATHING AND COMMERCIAL TAPE Henry Sheathing Tape was specifically designed to work with all of Fortifiber’s weather-resistive barriers – Jumbo Tex ®, Hydro Tex™, PlyDry ®, and WeatherSmart ®.By using Fortifiber Sheathing Tape you are able to take advantage of the air barrier properties of these building wraps while increasing their ability to protect against

moisture intrusion.

HENRY COMPANY

Rinse surface clean with fresh water and let thoroughly dry. Apply a thin, uniform coating of sealer, using either a deep-piled roller, brush or low-pressure sprayer. For maximum durability and resistance to spills, two coats are recommended. Let dry at least one hour between coats and before allowing traffic.

FORTIFLASH - HENRY

FortiFlash is engineered to deliver lasting protection against water intrusion in the most demanding environmental conditions. It is the premium self-adhesive waterproof flashing membrane for windows. It is also ideally suited for flashing non-roofing horizontal conditions such as pot shelves, parapets, sill pans and recessed windows. Its strong adhesion makes it a perfect choice for sealing

HENRY COMPANY

Stone Mason ® Premium Concrete Patch is a water-based mix specially formulated for the repair of holes, cracks and other small imperfections in concrete or masonry surfaces. Offering superior bonding vs. conventional cement patches, Stone Mason ® Premium Concrete Patch is also excellent for tuckpointing masonry and brickwork, and as an adhesive to bind broken pieces of concrete or

brick.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 203 ROLL ROOFING ADHESIVE Henry ® 203 Roll Roofing Adhesive is a premium, brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. As a replacement for hot asphalt in built-up roofing (BUR) applications, Henry 203 Roll Roofing Adhesive is designed for BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Henry® Drain Board products consist of multiple components designed to enhance the performance of Henry® protected membrane roofing , waterproofing systems, and Henry Green Roof applications HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

HENRY® DRAIN BOARD

Henry® Drain Board products consist of multiple components designed to enhance the performance of Henry® protected membrane roofing , waterproofing systems, and Henry Green Roof applications HENRY® 790-11 HOT RUBBERIZED ASPHALT Schedule a meeting →. Henry ® Company's time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane. 790-11 is an excellent choice when waterproofing both intensive and extensive vegetative roofing assemblies.. Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building AIR-BLOC® 21 AND 21 FR Air-Bloc ® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.. Air-Bloc ® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor 687 100% ACRYLIC ENVIRO-WHITE™ EXTREME ELASTOMERIC ROOFHENRY 587 ELASTOMERIC ROOF COATINGHENRY ROOF SEALANT ELASTOMERIC Henry ® 687 100% Acrylic Enviro-White™ Extreme Elastomeric Roof Coating is a premium, high solids white reflective roof coating. It features Dirt Pick-Up Resistance (DPR) technology, which prevents dirt and dust buildup, keeping the roof whiter and more reflective longer.

AIR-BLOC® 17MR

Schedule a meeting →. Spray-, roll- or brush-applied, Henry’s Air-Bloc ® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc ® 17MR can be applied down to 20°F (-6°C). Air-Bloc ® 17MR cures to a tough, monolithic rubber-like membrane.. Features. Low temperature application down to 20°F (-6°C) with no

BLUESKIN ® VP160

Schedule a meeting →. Henry ® Blueskin ® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin ® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical

attachment.

BLUESKIN® WP 200

Blueskin ® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

WATERPROOFING

Henry ® Waterproofing Systems. Henry offers a complete portfolio of waterproofing system solutions to meet virtually any application and project need. With solutions for foundations, plaza decks, and green roofs as well as vehicular and pedestrian traffic coatings, Henry offers high performing and cost effective systems designed to prevent water infiltration through the commercial building

HENRY COMPANY

Black Knight ® Airport Grade™ Asphalt Driveway Sealer is a premium quality asphalt emulsion driveway sealer. Black Knight ® Airport Grade™ Asphalt Driveway Sealer is designed to be used as a premium sealer for the sealing, protecting, preserving and beautifying of old and new driveways.. Features. Easy-to-stir; Fill surface cracks up to 3 mm (1/8") Dries to touch in approximately 4 hours. HENRY SHEATHING AND COMMERCIAL TAPE Henry Sheathing Tape was specifically designed to work with all of Fortifiber’s weather-resistive barriers – Jumbo Tex ®, Hydro Tex™, PlyDry ®, and WeatherSmart ®.By using Fortifiber Sheathing Tape you are able to take advantage of the air barrier properties of these building wraps while increasing their ability to protect against

moisture intrusion.

CLEAR SEALANT, CLEAR SEALANTS Kop-R-Lastic ® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility.

FORTIFLASH - HENRY

FortiFlash is engineered to deliver lasting protection against water intrusion in the most demanding environmental conditions. It is the premium self-adhesive waterproof flashing membrane for windows. It is also ideally suited for flashing non-roofing horizontal conditions such as pot shelves, parapets, sill pans and recessed windows. Its strong adhesion makes it a perfect choice for sealing

HENRY COMPANY

Stone Mason ® Premium Concrete Patch is a water-based mix specially formulated for the repair of holes, cracks and other small imperfections in concrete or masonry surfaces. Offering superior bonding vs. conventional cement patches, Stone Mason ® Premium Concrete Patch is also excellent for tuckpointing masonry and brickwork, and as an adhesive to bind broken pieces of concrete or

brick.

BLUESKIN ® VP100

Request a sample →. This next-generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry ® Blueskin ® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.. Part of the Fortifiber ® 1-2-3 moisture control system, Blueskin ® VP100 203 ROLL ROOFING ADHESIVE Henry ® 203 Roll Roofing Adhesive is a premium, brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. As a replacement for hot asphalt in built-up roofing (BUR) applications, Henry 203 Roll Roofing Adhesive is designed for

HENRY COMPANY

Stone Mason ® Premium Concrete Sealer protects and maintains the appearance of concrete floors, paving stones, quarry tiles, masonry, concrete blocks and bricks. This extremely durable, water-based clear acrylic sealer helps reduce dust accumulation on concrete and resists gasoline, motor oil and automotive chemicals. BLUESKIN® VP160 INSTALLATION GUIDELINES 3 1. Introduction This installation guideline includes materials and installation procedures for Blueskin® VP160 Self-Adhered Water Resistive Air Barrier.

Product Finder

Sales Rep Locator

Document Search

Contact

Product Finder Sales Rep Locator

Document Search

Contact

__

Residential and Light Commercial Building Envelope Systems® Commercial Building Envelope Systems® Fortifiber® 1-2-3 Moisture Control System Weather-resistive barriers Window and door flashings

Sealants

Weather-resistive air barriers and accessories

Foundation systems

Roofing Systems

Flooring

FIND Henry® AT YOUR LOCAL HOME IMPROVEMENT STORE

White roof coatings

Pigmented roof coatings Aluminum roof coatings Asphalt and damp proofing coatings Adhesives and primers Roof repair and installation

Repair sealants

Repair fabrics and reinforcement products Asphalt driveway sealers

Air Barrier Systems

Fluid applied air barriers Self-adhered air barriers

Flashings

Adhesives and primers

Sealants

Roofing Systems

Roof coatings Vegetated Roof Systems

Underlayments

Mastics, cements and sealants Hot rubberized asphalt Roof adhesives and primers Repair fabrics and reinforcements SBS modified bitumen

Built-up roofing

Spray

foam insulation

Waterproofing Systems

Cold fluid applied

Hot rubberized asphalt Self-adhered membranes

Vegetated Roof

Systems Damp proofing

Waterstops

Flashing and

accessories

TQ3 Specialty Waterproofing Applications Systems Brochures &

Videos Contact

Performance Additives Wax emulsions Paving products

Automotive coatings

Concrete joint sealants

Waterstops Marine

sealants Polyurethane system solutions

About Henry®

Henry® Mission and Vision Leadership Team Henry® Locations Careers at Henry® News and Media

Knowledge center

Videos Continuing Education Case Studies/Project Profiles

White Papers

Warranty Earn LEED

Credits Health Product Declarations Sales Rep Locator Third Party

Certifications

Customer Care

Product Support Environmental Health and Safety Standards for Suppliers Standard Terms

of Sale California

Transparency Act Purchase Order Terms and Conditions (Suppliers)

Dealer Locator

* Residential and light commercial Building Envelope Systems® * Fortifiber 1-2-3 moisture control system * Weather resistive barriers * Window and door flashings

* Sealants

* Weather resistive air barriers and accessories * Foundation systems

* Roofing systems

* Flooring

* Commercial Building Envelope Systems® * Air Barrier Systems * Fluid applied air barriers * Self-adhered air barriers

* Flashings

* Adhesives and primers

* Sealants

* Roofing Systems

* Roof coatings

* Vegetated Roof Systems

* Underlayments

* Mastics, cements and sealants * Hot rubberized asphalt * Roof adhesives and primers * Repair fabrics and reinforcements * SBS modified bitumen

* Built-up roofing

* Spray foam insulation * Waterproofing Systems * Waterproofing products and systems * Cold fluid applied * Hot rubberized asphalt * Self-adhered membranes * Vegetated Roof Systems

* Damp proofing

* Waterstops

* Flashing and accessories * TQ3 Specialty Waterproofing

* Applications

* Systems

* Brochures & Videos

* Contact

* Performance additives

* Wax emulsions

* Paving products

* Automotive coatings * Concrete joint sealants

* Waterstops

* Marine sealants

* Polyurethane system solutions * Find Henry® at your local home improvement store * White roof coatings * Pigmented roof coatings * Aluminum roof coatings * Asphalt and damp proofing coatings * Adhesives and primers * Roof repair and installation

* Repair sealants

* Repair fabrics and reinforcement * Asphalt driveway sealers and repair

* About Henry®

* About Henry®

* Henry® Mission and Vision

* Leadership Team

* Henry® Locations

* Careers at Henry®

* News and Media

* Knowledge center

* Videos

* Continuing Education * Case Studies/Project Profiles

* White Papers

* Warranty

* Earn LEED Credits

* Health Product Declarations

* Sales Rep Locator

* Third Party Certifications

* Customer care

* Product Support

* Environmental Health and Safety * Standards for Suppliers * Standard Terms of Sale * California Transparency Act * Purchase Order Terms and Conditions (Suppliers)

* Dealer Locator

__

LET US HELP YOU FIND THE RIGHT BUILDING ENVELOPE SOLUTION FOR YOUR

PROJECT.

SEARCH

Choosing the right building envelope system for every project

STARTS HERE.

Commercial __

Residential __

Roof Restoration __

Commercial Building

Envelope Systems

I’m looking for solutions based on the following type of project:

Air Barrier Systems

Fluid applied air barriers Self-adhered air barriers

Flashings

Adhesives and primers

Sealants

Waterproofing Systems

Cold fluid applied

Hot rubberized asphalt Self-adhered membranes

Vegetated roof

assembly Damp proofing

Waterstops

Flashings and

accessories

Roofing Systems

Roof coatings Vegetated roof assemblies

Underlayments

Mastics, cements and sealants Hot rubberized asphalt Roof adhesives and primers Repair fabrics and reinforcements

Built-up roofing

Spray

foam insulation

TQ3 Specialty Waterproofing Applications Systems Brochures &

Videos Contact

Retail Warehouse

Office Hotel Parking Garage/Auto Service Manufacturing Education

Light Commercial

Dormitory Healthcare Government Religious Recreation

Transportation

* Air Barrier Systems * Fluid applied air barriers * Self-adhered air barriers

* Flashings

* Adhesives and primers

* Sealants

* Waterproofing Systems * Cold fluid applied * Hot rubberized asphalt * Self-adhered membranes * Vegetated roof assembly

* Damp proofing

* Waterstops

* Flashings and accessories

* Roofing Systems

* Roof coatings

* Vegetated roof assemblies

* Underlayments

* Mastics, cements and sealants * Hot rubberized asphalt * Roof adhesives and primers * Repair fabrics and reinforcements

* Built-up roofing

* Spray foam insulation * TQ3 Advanced Coating Systems

* Applications

* Systems

* Brochures & Videos

* Contact

* I’m looking for solutions based on the following type of project:

* Retail

* Warehouse

* Office

* Hotel

* Parking Garage/Auto Service

* Manufacturing

* Education

* Light Commercial

* Dormitory

* Healthcare

* Government

* Religious

* Recreation

* Transportation

Commercial __

Residential Building

Envelope Systems

Find Henry® at your local home improvement store

Fortifiber® 1-2-3

Moisture Control System Weather resistive barriers Window and door flashings

Sealants

Weather resistive air barriers and accessories Foundation and below grade A complete line of waterproofing solutions

Roofing Systems

A

complete line of roofing underlayments

Flooring

A complete line of flooring

products

I’m looking for solutions based on the following type of project: Apartment/condominiums Dormitory

Light commercial

Multi-family

Single family home

White roof coatings

Pigmented and clear roof coatings Aluminum roof coatings Asphalt and damp proofing coatings Adhesives and primers Roof repair and installation

Repair sealants

Repair fabrics and reinforcement Asphalt driveway sealers and repair * Fortifiber® 1-2-3 Moisture Control System * Weather resistive barriers * Window and door flashings

* Sealants

* Weather resistive air barriers and accessories * Foundation and below grade

* Roofing systems

* Flooring

* Find Henry® at your local home improvement store * White roof coatings * Pigmented roof coatings * Aluminum roof coatings * Asphalt and damp proofing coatings * Adhesives and primers * Roof repair and installation

* Repair sealants

* Repair fabrics and reinforcement * Asphalt driveway sealers and repair * I’m looking for solutions based on the following type of project: * Apartment/condominiums

* Dormitory

* Light commercial

* Multi-family

* Single family home

Residential __

Henry® Roof Restoration Systems Silicone roof coatings Acrylic roof coatings Aluminum roof coatings Asphalt roof coatings Roof adhesives and primers Mastics, cements and sealants Let us help you on your next project:

Documents

Product catalog

Request a FREE roof walk Request a product sample

Systems

calculator

* Henry® Roof Restoration Systems * Our complete portfolio of roof coatings * Silicone roof coatings * Acrylic roof coatings * Aluminum roof coatings * Asphalt roof coatings * Roof adhesives and primers * Mastics, cements and sealants * Let us help you on your next project:

* Documents

* Product catalog

* Request a FREE roof walk * Request a product sample * Systems calculator

Roof Restoration __

ABOUT HENRY®

HENRY® COMPANY IS THE MOST COMPLETE PROVIDER OF BUILDING ENVELOPE SYSTEMS® THAT CONTROL THE FLOW OF WATER, AIR, VAPOR AND ENERGY IN A

BUILDING.

From the tallest commercial structures to small single family homes we have the right solutions for below grade, walls and roofs.

Learn More→

Important COVID-19 Communication to our Customers → Important COVID-19 Communication to our Suppliers →

">  ">

BRAND PORTFOLIO

COMMERCIAL

Self-adhered building envelope solutions Liquid applied air barrier solutions Liquid applied waterproofing solutions

Cold fluid-applied

waterproofing system with

PUMA technology

See all of our commercial solutions _ _ RESIDENTIAL & LIGHT COMMERCIAL Self-adhered building envelope solutions Mechanically-fastened weather resistive barrier for stucco and masonry Mechanically-fastened weather resistive barrier technology Waterproof flashing membrane See all of our residential & light commercial solutions _ _ FIND HENRY® PRODUCTS AT YOUR LOCAL HOME IMPROVEMENT STORE See the Henry products you can find at your local home improvement store.

__

PROJECT PROFILE

HENRY® GREEN ROOF SYSTEM ENABLES UNIVERSITY OF MIAMI TO INSTALL VEGETATED ROOFS ALONG HURRICANE SUPERHIGHWAY The University of Miami wanted to demonstrate its commitment to environmental sustainability by installing green roofs onto its new Lakeside Village student housing complex. The 25 roof decks were designed to hold 10 inches of growth media and contain a pronounced roof slope of either 4/12 or 3/12. Miami-Dade County typically rejected green roof projects without a minimum of 24 inches of growth media due to wind uplift within a hurricane zone. Also, standard drainboards and root barriers would not have sufficient slip resistance in the proposed sloped design scenario.

LEARN MORE→

PROJECT PROFILE

SALT LAKE CITY INTERNATIONAL AIRPORT CHOOSES HENRY BUILDING ENVELOPE SYSTEMS® FOR NEXT-GENERATION FACILITY Salt Lake City International Airport (SLC), which serves more than 24 million travelers a year, is preparing for decades of growth with the construction of an entirely new airport. The $3.6 billion multi-phased construction project is the largest in history for the state of Utah, as well as one of the nation’s largest aviation projects in years. The sheer scope of the SLC project, in terms of square footage and breadth of products needed, called for substantial coordination between Henry, the architects, general contractor, exteriors contractor, installer and testing agency.

LEARN MORE→

PROJECT PROFILE

HENRY® HELPS GET DRIVELANE OPEN AND CRANE ON-SITE ASAP Now under construction in the Kendall Square section of Cambridge, 145 Broadway is a 19-story office building that will overlook Boston from across the Charles River. Slated for completion in 2019, the property will feature 10,000 square feet of ground floor retail space, plus a five-story, below-grade parking garage. At the project preconstruction meeting, the general contractor wondered if there was a way to speed up the concrete’s standard 28-day cure time – at least for a split slab section that would sit atop the underground garage and beneath a loading dock behind the building. The area shared a busy throughway around the building and would soon have to support a heavy crane for vertical construction. The general contractor wanted the most durable surface available to support the crane but did not want to wait the standard 28-day cure time for concrete. Thanks to a Henry® Representative who was also at the meeting, he never had to.

LEARN MORE→

PROJECT PROFILE

HENRY® PROVIDES BUILDING ENVELOPE SYSTEMS® SOLUTIONS FOR MIAMI BEACH CONVENTION CENTER RENOVATION To meet the demands of the 21st century, the MBCC committed to a $615 million renovation and expansion. When complete in 2018, the 1.4 million-square foot LEED-certified facility will feature a 60,000-square foot grand ballroom, a 20,000-square foot glass rooftop ballroom, new technologically advanced meeting rooms and new indoor/outdoor public spaces. Following extensive evaluation and testing, project planners selected Henry® Building Envelope Systems® solutions to restore part of the convention center’s existing roof, serve as the building’s air barrier and waterproofing systems, and provide gaskets for the underground water management system.

LEARN MORE→

←→

TOOLS

Henry_homepage icons

Customer

Care

Untitled-1

Knowledge

Center

Untitled-1

Document

Search

Copyright© 2020 Henry Company. All rights reserved. PRODUCTSUPPORT@HENRY.COM | 1-800-486-1278 Privacy Policy | Site Map

Choose Country

*   United States

*   Canada - English *   Canada - French

__ __

__

__

__

×