HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise.

TEST RESULTS

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR There are many other technologies on the market that attempt to deal with IAQ (Indoor Air Quality) problems. They all have their strengths and their weaknesses, but most importantly, NONE of them are capable of dealing with most of all the typical IAQ problems like AtmosAir’s

DBD BPI process.

500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC100 FC100 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller

air handling

HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise.

TEST RESULTS

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR There are many other technologies on the market that attempt to deal with IAQ (Indoor Air Quality) problems. They all have their strengths and their weaknesses, but most importantly, NONE of them are capable of dealing with most of all the typical IAQ problems like AtmosAir’s

DBD BPI process.

500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC100 FC100 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller

air handling

RESOURCE CENTER

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. TECHNOLOGY – HOW IT WORKS – ATMOSAIR AtmosAir is the global solution for healthy air. Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise.

CORONAVIRUS

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified, SYSTEMS – RESIDENTIAL SYSTEMS – ATMOSAIR Atmosair Residential Air Purification Systems Our products are available in both self-contained stand alone units and in-duct models that are installed directly into your central HVAC system. Whether for a smaller individual room (bedroom, smaller den/living rooms, pantry) or larger areas (open floors, basements, etc), our products range in application from 500 sq. ft. to

TEST RESULTS

AtmosAir is the global solution for healthy air. Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. SYSTEMS – COMMERCIAL – ATMOSAIR Atmosair for Commercial Buildings If you own or manage a commercial building, you know that indoor air quality is not just a health issue—it is also an energy issue. The cost to heat or cool make-up air continues to rise dramatically, but you can’t reduce air quality to save energy. AtmosAir is the solution that TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR There are many other technologies on the market that attempt to deal with IAQ (Indoor Air Quality) problems. They all have their strengths and their weaknesses, but most importantly, NONE of them are capable of dealing with most of all the typical IAQ problems like AtmosAir’s

DBD BPI process.

ATMOSSMART – ATMOSAIR AtmosSmart™ is an in-duct, IoT Enabled, air monitoring system that integrates with AtmosAir systems to smartly purify air based on real-time Indoor Air Quality measurement. This is to provide optimal air treatment in dynamic IAQ conditions.

FAQ – ATMOSAIR

Indoor Environmental Quality (IEQ) or Indoor Air Quality (IAQ) is extremely important to our health and well-being. The Environmental Protection Agency named IAQ as one of the top five environmental health risks, because improvements in energy efficient construction materials have led to reduced air circulation indoors — and that causes a dangerous accumulation of disease-causing particles HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs).

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

FC-400FM - ATMOSAIR

East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide FC-400FM 3 Table of Contents 01 PRODUCT OVERVIEW 4 FC-400 FM Diagram 4 02 INSTALLATION 5 Mechanical Installation 5 PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump PRODUCT SUBMITTAL FC100 FC100 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller

air handling

HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs).

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

FC-400FM - ATMOSAIR

East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide FC-400FM 3 Table of Contents 01 PRODUCT OVERVIEW 4 FC-400 FM Diagram 4 02 INSTALLATION 5 Mechanical Installation 5 PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump PRODUCT SUBMITTAL FC100 FC100 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller

air handling

TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. TECHNOLOGY – HOW IT WORKS – ATMOSAIR AtmosAir is the global solution for healthy air. Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from SYSTEMS – RESIDENTIAL SYSTEMS – ATMOSAIR Atmosair Residential Air Purification Systems Our products are available in both self-contained stand alone units and in-duct models that are installed directly into your central HVAC system. Whether for a smaller individual room (bedroom, smaller den/living rooms, pantry) or larger areas (open floors, basements, etc), our products range in application from 500 sq. ft. to

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts.

FAQ – ATMOSAIR

AtmosAir Bi-Polar Ionization (BPI) is the indoor air purification technology used by AtmosAir™. AtmosAir BPI works by adding an engineered amount of both positive and negative oxygen ions to the supply air of an air handling system. An ion is an atom or molecule that has gained or lost an electron. Both positive and negative ions

exist in the

FC-400 - ATMOSAIR

East oast 203.335.3700 West Coast 480.629.4784 CAG-07-19-002 AtmosAir.com Installation, Operation & Maintenance Guide FC-400 3 Table of Contents 01 PRODUCT OVERVIEW 4 FC-400 Diagram 4 02 INSTALLATION 5 Mechanical Installation 5 PRODUCT SUBMITTAL FC400FM FC400FM PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400FM ionization system is intended to be flush mounted in the supply discharge in

smaller air

HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump TECHNOLOGY – HOW IT WORKS – ATMOSAIR Airflow passes over our patented AtmosAir Bi-Polar Ionization tube. The tube energizes the air to form bi-polar — positive and negative — air ions. The airflow distributes the energized ions into all of the spaces served by the HVAC system in an in-duct installation, or

into

TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from SYSTEMS – RESIDENTIAL – ATMOSAIR AtmosAir offers a revolutionary, patented technology that can quickly fill your entire home with crystal clear, purified air, and keep it that way for only pennies a day. Rigorous, independent testing confirms that AtmosAir reduces or eliminates the toxins in the breathable air of an environment. Reduce odor, mold, dust, pollen,

bacteria

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. SYSTEMS – COMMERCIAL – ATMOSAIR AtmosAir is the solution that addresses both air quality and energy costs — a technology that attacks odors, mold, VOCs, bacteria, allergens, dust - all contributors to Sick Building Syndrome. With AtmosAir, you’ll also get Guaranteed Energy Savings without relying on chemicals or metals, or creating toxic byproducts. SEE COMMERCIAL

SYSTEMS.

FAQ – ATMOSAIR

AtmosAir Bi-Polar Ionization (BPI) is the indoor air purification technology used by AtmosAir™. AtmosAir BPI works by adding an engineered amount of both positive and negative oxygen ions to the supply air of an air handling system. An ion is an atom or molecule that has gained or lost an electron. Both positive and negative ions

exist in the

CLIENTS – MARKETS – ATMOSAIR Atmosair Customizes Solutions for a Wide Range of Commercial Spaces With over fifteen years of project management experience, we have extensive expertise across all major construction market sectors. Whether it’s a highly technical and regulated healthcare project, a mission critical data center, a government facility demanding high degrees of transparency and compliance, or the retrofitting CLIENTS – WORKPLACES – ATMOSAIR AtmosAir is the global solution for healthy air. Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. RMA FORM – ATMOSAIR Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. PRODUCT SUBMITTAL 508FC 508FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 508FC ionization system is intended to be mounted in the supply air duct or air handling system of a HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump HOME – ATMOSAIRCONTACTABOUTSYSTEMSCASE STUDIESCLIENTSTECHNOLOGY The Tacoma Dome and Greater Tacoma Convention Center join a long list of venues that have installed AtmosAir Solutions BPI devices. Installed in HVAC systems, these improve wellness by suppressing airborne and surface micro-organisms and pathogens, including viruses, bacteria and mold, and reduces odors as well as unhealthy and irritating volatile organic compounds (VOCs). TECHNOLOGY – HOME – ATMOSAIR Air ions naturally filter pollutants from the air we breathe. In naturally pristine environments, such as high mountain peaks, air ion levels tend to be much higher than in areas that are more highly populated and industrialized, such as urban areas. These ions exhaust themselves cleaning pollutant-rich air. In indoor environments the problem becomes magnified,

RESOURCE CENTER

The individual cut sheets contain the necessary technical specifications on all of our products, to assist you in your engineering of an AtmosAir system. These cut sheets are intended for engineers, architects, mechanical contractors, or any party needing performance or physical data on our products. If you require any further assistance on

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from

TEST RESULTS

Compare our performance to the test results of competitor air purification products to see just how much more effective AtmosAir is at removing particles, compounds, mold spores and dust from the air we breathe. Best of all — and unlike other air purification systems — AtmosAir produces no harmful ozone or other byproducts. 500 SERIES - ATMOSAIR East oast 203.335.3700 West Coast 480.629.4784 CAG-04-19-001 tmosAir.com Installation, Operation & Maintenance Guide 500 Series 4 01 PRODUCT OVERVIEW The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for PRODUCT SUBMITTAL RAINIER SUMMIT Rainier Summit PRODUCT SUBMITTAL APPLICATION The AtmosAir Rainier Summit is a standalone self contained compact unit designed to

increase ionization

PRODUCT SUBMITTAL 500FC 500FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 500FC ionization system is intended to be mounted in the supply air duct or air handling system of a PRODUCT SUBMITTAL FC400 FC400 PRODUCT SUBMITTAL APPLICATION The AtmosAir FC400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump TECHNOLOGY – HOW IT WORKS – ATMOSAIR Airflow passes over our patented AtmosAir Bi-Polar Ionization tube. The tube energizes the air to form bi-polar — positive and negative — air ions. The airflow distributes the energized ions into all of the spaces served by the HVAC system in an in-duct installation, or

into

TECHNOLOGY – PRODUCT COMPARISON – ATMOSAIR HEPA (High Efficiency Particulate Air) Media Filtration. Pleated type filter that has proven 99.97% efficient to trap particles 0.3 microns and larger. Can be incorporated into central HVAC systems or used as stand alone units. Is effective on particulate removal. Cannot treat source of contaminants, can only filter contaminated air from SYSTEMS – RESIDENTIAL – ATMOSAIR AtmosAir offers a revolutionary, patented technology that can quickly fill your entire home with crystal clear, purified air, and keep it that way for only pennies a day. Rigorous, independent testing confirms that AtmosAir reduces or eliminates the toxins in the breathable air of an environment. Reduce odor, mold, dust, pollen,

bacteria

CORONAVIRUS

Coronavirus – AtmosAir. Explanation of Coronavirus and Application of Bi-Polar Ionization to Disinfect Air & Surfaces. EXPLAINED BY. Dr. Philip M. Tierno, JR, Professor of Microbiology & Pathology New York University School of Medicine. Coronaviruses were first identified in the 1960s. Coronaviruses are enveloped RNA viral particles. SYSTEMS – COMMERCIAL – ATMOSAIR AtmosAir is the solution that addresses both air quality and energy costs — a technology that attacks odors, mold, VOCs, bacteria, allergens, dust - all contributors to Sick Building Syndrome. With AtmosAir, you’ll also get Guaranteed Energy Savings without relying on chemicals or metals, or creating toxic byproducts. SEE COMMERCIAL

SYSTEMS.

FAQ – ATMOSAIR

AtmosAir Bi-Polar Ionization (BPI) is the indoor air purification technology used by AtmosAir™. AtmosAir BPI works by adding an engineered amount of both positive and negative oxygen ions to the supply air of an air handling system. An ion is an atom or molecule that has gained or lost an electron. Both positive and negative ions

exist in the

CLIENTS – MARKETS – ATMOSAIR Atmosair Customizes Solutions for a Wide Range of Commercial Spaces With over fifteen years of project management experience, we have extensive expertise across all major construction market sectors. Whether it’s a highly technical and regulated healthcare project, a mission critical data center, a government facility demanding high degrees of transparency and compliance, or the retrofitting CLIENTS – WORKPLACES – ATMOSAIR AtmosAir is the global solution for healthy air. Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. RMA FORM – ATMOSAIR Disclaimer: The air purification technology provided by Clean Air Group is intended to improve indoor air quality. It is not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise. PRODUCT SUBMITTAL 508FC 508FC PRODUCT SUBMITTAL APPLICATION The AtmosAir 508FC ionization system is intended to be mounted in the supply air duct or air handling system of a

* Facebook

* LinkedIn

* About

* Advisors

* Partners

* FAQ

* Certifications

* Testimonials

* Why Choose AtmosAir

* Become a Dealer

* Resource Center

* News

* Contact

(203) 335-3700

* CORONAVIRUS

* Explanation of AtmosAir and Coronavirus * Center for Active Design Recommendation * Dr. Phil Tierno Whitepaper

* ATL Labs Testing

* Airborne and Surface Stability of COVID-19

* TECHNOLOGY

* How AtmosAir Works * AtmosAware™ IAQ Monitoring * Guaranteed Energy Savings * LEED & ENERGY STAR® * Sick Building Syndrome * Product Comparison

* PROJECTS

* Workplace

* Healthcare

* Education

* Sports

* Gaming

* CASE STUDIES

* COMMERCIAL

* Products

* RESIDENTIAL

* Products

* Search

* MENU

*

VISIBLY CLEANER AIR™ GUARANTEED ENERGY SAVINGS TESTED & VALIDATED RESULTS HEALTHIER & MORE PRODUCTIVE WORKFORCE CONTINUOUS DISINFECTION

TECHNOLOGY

* INDOOR AIR PURIFICATION

* ENERGY EFFICIENCY

* HEALTH & WELLNESS

* AIR TESTING & IAQ MONITORING YOU ARE WHAT YOU BREATHE AtmosAir™ air purification technology actively contributes to better health by restoring indoor air to its natural state where no pollution or contaminants exist — while reducing energy use and emissions in the process. AtmosAir™ is the most proven and effective solution to reduce inhalable particle matter (PM), VOCs, and pathogens to create healthy indoor environments where people thrive. WATCH AND LEARN HOW ATMOSAIR WORKS IN OUR NEW VIDEO! INDOOR AIR PURIFICATION As we enter areas in which the atmosphere has become polluted, the natural supply of ions becomes exhausted. In indoor environments the problem becomes magnified. As we strive to build our homes and buildings to be more energy efficient, they allow for less natural ventilation. " style="top: 61.3%; left: 82.2%; ">

1

HOW IT WORKS

WHY YOU NEED BETTER INDOOR AIR QUALITY The US Environmental Protection Agency named indoor air quality as one of the top 5 health threats in the U.S. That’s because we are spending 90% of our time indoors. As buildings become more energy efficient, they’re less likely to circulate fresh, clean air — and more likely to accumulate unsafe levels of particles, bacteria,  mold spores and volatile organic compounds (VOCs). AtmosAir™ is the indoor air quality solution that actively reduces VOCs, bacteria, dust particles, mold spores, and odors _in the space where you breathe_. Suitable for commercial, buildings and residential homes, AtmosAir™ technology gives you the same healthy air found near high elevations.

ENERGY EFFICIENCY

GUARANTEED ENERGY SAVINGS An average commercial buildings spends 50% of it’s energy costs on HVAC related expenses. AtmosAir Bi-Polar Ionization (BPI) allows buildings to reduce outside air requirements by 50% or more below standard by using the ASHRAE 62.1 Indoor Air Quality Procedure. THIS NETS TO A 20-40% REDUCTION IN HVAC ENERGY SPEND. Let us estimate how much money you can save with our ASHRAE compliant energy savings software, AtmosIQ™. LEARN ABOUT ENERGY SAVINGS

ENERGY SAVINGS

HOW IT WORKS

CLEAN AIR DELIVERY RATE GUARANTEED ENERGY SAVINGS An average commercial buildings spends 50% of it’s energy costs on HVAC related expenses. AtmosAir Bi-Polar Ionization (BPI) allows buildings to reduce outside air requirements by 50% or more below standard by using the ASHRAE 62.1 Indoor Air Quality Procedure. THIS NETS TO A 20-40% REDUCTION IN HVAC ENERGY SPEND. Let us estimate how much money you can save with our ASHRAE compliant energy savings software, AtmosIQ™. LEARN ABOUT ENERGY SAVINGS

HEALTH & WELLNESS

An AtmosAir system virtually eliminates dust, pollen, mold, virus and bacteria from the air. It also eliminates static electricity by balancing the charge of the air molecules. This can have dramatic effects on sickness, productivity and the health of your workforce and family. " style="top: 33.3%; left: 32.3%; ">

1

LEARN ABOUT THE HEALTH BENEFITS

HEALTHIER PEOPLE

AtmosAir technology provides your indoor environment with MEASURABLY HEALTHIER INDOOR AIR QUALITY (IAQ). Our all-natural solutions have been field and lab tested against many contaminants of concern. They

also:

* Reduce mold and reduce the spread of airborne viruses and bacteria that pass through normal filtration systems * Produce no harmful byproducts such as ozone, titanium dioxide, or

ultraviolet light

* Mitigate risk of absenteeism and sick building syndrome (SBS) by providing Measurably Cleaner Air™ AIR TESTING & IAQ MONITORING Our indoor air quality solutions are backed up by rigorous testing and monitoring that proves our results. With over 7,000 installations and scores of independent tests , the data is so compelling that we’ve guaranteed the results. AtmosAir™ has introduced AtmosAware™, a cloud based built environment monitoring system. What was always invisible is now _VISIBLE_ at any time on a computer, phone, or tablet. AtmosAware™ monitors the following environmental parameters in real-time: CO2, TVOC (total volatile organic compounds), particulate matter 2.5 (PM2.5), illumination, noise, temperature and relative humidity.

CLIENTS INCLUDE

PreviousNext

WHAT DOES ATMOSAIR TECHNOLOGY DO?

REMOVES UP TO 00%

of Volatile Organic Compounds

SAVES 00%

in HVAC electrical costs

UP TO 00% REDUCTION

in required fresh air ventilation

REMOVES UP TO 00%

of Ultrafine Particles WHAT DOES ATMOSAIR TECHNOLOGY DO?

REMOVES UP TO 90%

of Volatile Organic Compounds

SAVES 30%

in HVAC electrical costs

UP TO 70% REDUCTION

in required fresh air ventilation

REMOVES UP TO 95%

of Ultrafine Particles

FEATURED IN

PreviousNext

SEARCH

RECENT NEWS

* NEW WHITE PAPER: THE NATURE OF AIR: ECONOMIC AND BIO-INSPIRED PERSPECTIVES ON INDOOR AIR QUALITY MANAGEMENTMARCH 21, 2019 - 1:12 PM * ATMOSAIR PROJECT SPOTLIGHT: WEWORKJANUARY 30, 2019 - 4:11 PM * ATMOSAIR IN THE NEWS: VENUES NOWJANUARY 30, 2019 - 3:57 PM

FIND IT FAST

* About

* FAQ

* News

* Commercial

* Residential

* Become a Dealer

* Contact

ATMOSAIR LOCATIONS

US HEADQUARTERS

418 Meadow Street, Suite 204

Fairfield, CT 06824

Phone: (203) 335-3700

Fax: (203) 335-1075

ARIZONA OFFICE

2115 E. Cedar St, Suite 6

Tempe, AZ 85281

SHANGHAI OFFICE

753 Yuyuan Road

Building C.3/F

Shanghai 200050, CHINA Phone: +86 13764254141 Copyright 2019 Clean Air Group, Inc. | Website Design by Echo Brand

Group

* Facebook

* LinkedIn

Scroll to top